Postgraduate Diploma in V2G/V2X for 2R and Operations Backend
Online 800-hour Postgraduate Diploma in V2G/V2X for 2R and Operations Backend. 8 modules with ISO 15118-20, OCPP 2.0.1 and EVerest. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain vehicle-grid integration models and their services.
Analyse bidirectional hardware and grid connection requirements.
Apply charging communication and energy management protocols.
Design connectivity architectures for two-wheeler fleets.
Develop backend components for real-time operation.
Optimise charging and discharging considering degradation and market conditions.
Evaluate the cybersecurity and regulatory compliance of the solution.
Who it's for
- Vehicle-grid integration engineer wishing to specialise in V2G/V2X for 2R and Operations Backend.
- Mobility software architect wishing to specialise in V2G/V2X for 2R and Operations Backend.
- Cybersecurity engineer wishing to specialise in V2G/V2X for 2R and Operations Backend.
- Backend developer wishing to specialise in V2G/V2X for 2R and Operations Backend.
- Energy markets analyst wishing to specialise in V2G/V2X for 2R and Operations Backend.
- Charging systems engineer wishing to specialise in V2G/V2X for 2R and Operations Backend.
- Graduates in engineering or science seeking to enter shared mobility.
What you'll work with
- ISO 15118-20
- OCPP 2.0.1
- IEEE 2030.5
- OpenADR 2.0b
- EN 50549-1
- UN R155
- ISO/IEC 27001
- Regulation (EU) 2016/679
8 modules · 800 h
1.1V1G, V2G, V2H and V2L concepts1.2Grid flexibility services1.3Adjustment and balancing markets1.42R battery as a distributed resource1.5Aggregation of small batteries1.6Impact on degradation1.7Use cases for motorcycles and scooters1.8Technical and regulatory barriers1.9International pilot projects1.10Workshop: valuation of services for a scooter fleet
2.1Bidirectional onboard chargers2.2Bidirectional DC chargers2.3Conversion for V2L and equipment power supply2.4Grid synchronisation and grid forming2.5Anti-islanding protection during grid discharge2.6Low-voltage grid connection requirements2.7Metering and fiscal meters2.8Round-trip efficiency2.9Hardware cost2.10Practical: energy balance of a V2G cycle
3.1High-level vehicle-to-charger communication3.2Charge point management3.3Demand response protocols3.4Grid information models3.5Roaming and operators3.6Bidirectional messages and use cases3.7Plug and Charge and certificates3.8Interoperability and conformity testing3.9Evolution of standards3.10Laboratory: simulation of an OCPP session with an open server
4.1Cellular connectivity architectures4.2Direct vehicle-to-vehicle communication4.3Vehicle status messages4.4Integration with smart city platforms4.5Latency and reliability4.6Communications cybersecurity4.7Identity and certificate management4.8Mobility data privacy4.9Integration in electric motorcycles4.10Case study: connectivity architecture for a fleet
5.1Microservices architecture5.2Real-time telemetry ingestion5.3Time-series databases5.4Orchestration of charging sessions5.5Flexibility dispatch algorithms5.6APIs for operators and users5.7Cloud scalability5.8Monitoring and alerts5.9Incident management5.10Practical: telemetry ingestion with MQTT and InfluxDB
6.1Charging and discharging optimisation6.2Degradation models in optimisation6.3Vehicle availability prediction6.4Remuneration for flexibility6.5Contracts with aggregators6.6Subscription models6.7Economic sensitivity analysis6.8Self-consumption regulation6.9Performance indicators6.10Case study: dispatch optimisation with linear programming
7.1Cybersecurity of connected vehicles7.2Information security in the backend7.3Personal data protection7.4Electrical safety in V2L7.5Grid connection requirements for distributed generation7.6Audits and certifications7.7Service continuity7.8Incident response7.9Contractual responsibilities between operators7.10Workshop: backend threat analysis
8.1Definition of the use case8.2Bidirectional hardware architecture8.3Communications architecture8.4Backend design8.5Optimisation algorithm8.6Cybersecurity analysis8.7Economic evaluation of the service8.8Pilot plan8.9Report and presentation8.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the enrolment period, making it easy to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is EVerest, Eclipse Mosquitto, InfluxDB, Grafana, Python (Pyomo), in free, academic or evaluation versions. Tests are studied using real procedures for simulating bidirectional charging sessions with OCPP, fleet flexibility dispatch optimisation, and threat analysis of an operations platform. Assessment is continuous per module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain vehicle-grid integration models and their services.
Analyse bidirectional hardware and grid connection requirements.
Apply charging communication and energy management protocols.
Design connectivity architectures for two-wheeler fleets.
Develop backend components for real-time operation.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours spread over 6 to 8 months. That is 10 to 15 hours per week on average, compatible with full-time work.
You will work with EVerest, Eclipse Mosquitto, InfluxDB, Grafana, Python (Pyomo). Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the final integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the higher-level programme. Check the credit transfer policy when you enrol.
Related programmes
Postgraduate Diploma in PTW Architecture and Dynamic Packaging
Online 800-hour Postgraduate Diploma in PTW Architecture and Dynamic Packaging. 8 modules covering Regulation (EU) 168/2013 on type-approval of L-category vehicles, Delegated Regulation (EU) 3/2014 on…
Postgraduate Diploma in AC/DC Charging Strategies and Route Planning
Online Postgraduate Diploma of 800 h in AC/DC Charging Strategies and Route Planning. 8 modules covering IEC 61851-1, IEC 62196-2 and MATLAB/Simulink. Assigned tutor and open…
Postgraduate Diploma in Design and Robustness of PMVs
Online Postgraduate Diploma of 800 hours in design and robustness of PMVs. 8 modules covering UNE-EN 17128:2021, Real Decreto 970/2020 and SolidWorks. Assigned tutor and open…
More in Motorcycles & 2-Wheelers
All Motorcycles & 2-Wheelers programmes → · How to apply · Fees & financing · Scholarships