Postgraduate Diploma in Impact Studies and Hosting Capacity
Online 800-hour Postgraduate Diploma in Impact Studies and Hosting Capacity. 8 modules covering EN 50160, IEC 60076-7 and OpenDSS. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Model distribution networks for load flow studies.
Assess the technical impact of charging on transformers and lines.
Calculate hosting capacity using deterministic and stochastic methods.
Propose alternative measures to conventional network reinforcement.
Carry out connection studies for large charging loads.
Automate mass analyses with open-source tools.
Prepare technical reports for distribution companies and developers.
Who it's for
- Distribution network planning engineer wishing to specialise in Impact Studies and Hosting Capacity.
- Connection studies analyst wishing to specialise in Impact Studies and Hosting Capacity.
- Power quality engineer wishing to specialise in Impact Studies and Hosting Capacity.
- Grid integration consultant for charging wishing to specialise in Impact Studies and Hosting Capacity.
- Electrical systems simulation specialist wishing to specialise in Impact Studies and Hosting Capacity.
- Access and connection technician wishing to specialise in Impact Studies and Hosting Capacity.
- Graduates in engineering or science seeking to enter electricity distribution.
What you'll work with
- EN 50160
- IEC 60076-7
- IEC 60909-0
- IEC 61000-3-12
- Real Decreto 1183/2020
- Reglamento (UE) 2016/1388
- IEC 61000-3-2
- IEEE 1547-2018
8 modules · 800 h
1.1Radial and meshed topologies in distribution1.2European medium- and low-voltage networks1.3Distribution transformers and their loadability1.4Thermal limits of overhead lines and cables1.5Voltage limits under EN 501601.6Integration of chargers and distributed generation1.7Coincidence of residential demand1.8Network data from GIS1.9Network planning by the distribution company1.10Case study: characterisation of a feeder
2.1Load flow by Newton-Raphson2.2Unbalanced three-phase load flow2.3ZIP and constant-power load models2.4Electrical models of EV chargers2.5Quasi-static time-series simulation2.6Feeder modelling in OpenDSS2.7Network modelling in PowerFactory2.8Model validation with real measurements2.9Network equivalents and model reduction2.10Laboratory: load flow of an IEEE feeder
3.1Overloading of distribution transformers3.2Voltage drops in low voltage3.3Phase load imbalance3.4Additional technical losses in the network3.5Transformer ageing under IEC 60076-73.6Charger harmonics and THD distortion3.7Flicker and rapid voltage changes3.8Impact on protection settings3.9Electric vehicle penetration scenarios3.10Practical work: impact study of an urban network
4.1Definition and technical limit criteria4.2Deterministic calculation methods4.3Stochastic methods based on Monte Carlo4.4Iterative and optimisation methods4.5Capacity for new load and generation4.6Capacity maps published by distribution companies4.7Time-varying dynamic capacity4.8Uncertainty in network data4.9Comparison of methodologies proposed by EPRI4.10Laboratory: hosting capacity calculation in OpenDSS
5.1Reinforcement of transformers and cables5.2Voltage regulation with on-load tap changer5.3Inverter volt-var control5.4Intelligent load management5.5Distributed storage in low voltage5.6Topological network reconfiguration5.7Flexible connections with power limitation5.8Dynamic tariffs as a management signal5.9Cost-benefit analysis of alternatives5.10Case study: alternatives to network reinforcement
6.1Charging hubs and electric fleet depots6.2Short-circuit calculation under IEC 609096.3Protection coordination at medium voltage6.4Voltage stability under large loads6.5Power quality under IEC 61000-3-126.6Demand grid code requirements6.7Contingency studies with N-1 criterion6.8Technical report for the distribution company6.9Study timelines and procedures6.10Practical work: connection study for a depot
7.1Low-voltage smart meter data7.2Network analytics with Python and pandapower7.3Automation of mass connection studies7.4EV adoption forecasting7.5Probabilistic network planning7.6Publication of available access capacities7.7Transparency and supervision by the CNMC7.8Integration into investment plans7.9GIS tools for planning7.10Workshop: mass study with pandapower
8.1Selection of the study network8.2Model construction and validation8.3Definition of penetration scenarios8.4Hosting capacity calculation8.5Proposal of mitigation measures8.6Drafting the final technical report8.7Power quality analysis8.8Economic evaluation of measures8.9Dissertation and presentation8.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, making it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is OpenDSS, DIgSILENT PowerFactory, pandapower, CYME, QGIS, in free, academic or evaluation versions. The case studies are based on real procedures for impact studies of EV charging in urban networks, calculation of access capacity for fleet depots, and reinforcement planning in low-voltage networks. Assessment is continuous per module plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Model distribution networks for load flow studies.
Assess the technical impact of charging on transformers and lines.
Calculate hosting capacity using deterministic and stochastic methods.
Propose alternative measures to conventional network reinforcement.
Carry out connection studies for large charging loads.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours spread over 6 to 8 months. That is between 10 and 15 hours a week on average, compatible with a full-time job.
The programme uses OpenDSS, DIgSILENT PowerFactory, pandapower, CYME and QGIS. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
SEIUM's own diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official Ministry qualification.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the advanced programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in High-Power Architectures for Trucks/Mining
Online 800-hour Postgraduate Diploma in High-Power Architectures for Trucks/Mining. 8 modules covering ISO 6469-3, UNECE Regulation R100 and MATLAB/Simulink. Assigned tutor and open enrolment.
Postgraduate Diploma in Environmental Testing and Electrical Safety
Online 800-hour Postgraduate Diploma in Environmental Testing and Electrical Safety. 8 modules covering IEC 60068-2-1, IEC 60529 and LabVIEW. Assigned tutor and open enrolment.
Postgraduate Diploma in Marine e-Propulsion and Cold-Ironing
Online 800-hour Postgraduate Diploma in Marine e-Propulsion and Cold-Ironing. 8 modules covering IEC/IEEE 80005-1, IEC/IEEE 80005-3 and ETAP. Assigned tutor and open enrolment.
More in Electromobility, Batteries & Hydrogen
All Electromobility, Batteries & Hydrogen programmes → · How to apply · Fees & financing · Scholarships