Postgraduate Diploma in CMM Programming and Probing Strategies
Online 800-hour Postgraduate Diploma in CMM Programming and Probing Strategies. 8 modules covering ISO 10360 (CMM acceptance testing), ISO 1101 (geometrical tolerances) and PC-DMIS. Dedicated tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the types of coordinate measuring machines and their verification.
Select and calibrate sensors and probe configurations.
Establish alignments and coordinate systems from references.
Define probing strategies suited to each geometric feature.
Program CMM offline using a CAD model and in DMIS language.
Evaluate geometrical tolerances according to ISO GPS and ASME Y14.5.
Estimate measurement uncertainty and write inspection reports.
Who it's for
- CMM programmer looking to specialise in CMM Programming and Probing Strategies.
- Metrology technician looking to specialise in CMM Programming and Probing Strategies.
- Quality engineer looking to specialise in CMM Programming and Probing Strategies.
- Dimensional metrologist looking to specialise in CMM Programming and Probing Strategies.
- First-article inspector looking to specialise in CMM Programming and Probing Strategies.
- Metrology laboratory manager looking to specialise in CMM Programming and Probing Strategies.
- Engineering or science graduates seeking to enter the automotive sector.
What you'll work with
- ISO 10360 (CMM acceptance testing)
- ISO 1101 (geometrical tolerances)
- ASME Y14.5 (dimensioning and tolerancing)
- ISO 5459 (datums and datum systems)
- ISO 14253-1 (conformity decision rules)
- ISO 15530-3 (CMM uncertainty using calibrated workpieces)
- ANSI/DMIS 105.2 (DMIS)
8 modules · 800 h
1.1Architectures: bridge, gantry, arm and cantilever1.2Scales, guideways and error compensation1.3Indication error MPE according to ISO 10360-21.4Environment: temperature, vibration and cleanliness1.5Articulated arms and laser trackers1.6Shop-floor CMM versus laboratory1.7Maintenance and periodic verification1.8Safety in CMM operation1.9Equipment selection according to tolerances1.10Laboratory: intermediate check with gauge blocks
2.1Touch-trigger probes2.2Scanning probes2.3Optical and laser sensors2.4Stylus configuration: ruby, silicon nitride and disc2.5Extensions, star styli and articulating heads2.6Stylus qualification on a reference sphere2.7Probe form errors according to ISO 10360-52.8Automatic probe changers2.9Sensor selection by feature2.10Practice: configuration and qualification of a star stylus probe
3.13-2-1 plane-line-point alignment3.2Iterative and best-fit alignment3.3Alignment to datums according to ISO 54593.4Alignment to CAD model3.5Parts without clear reference surfaces3.6Machine and workpiece coordinate systems3.7Fixturing and alignment repeatability3.8Alignment errors and their propagation3.9Alignment on deformed historic parts3.10Workshop: alignment of a cylinder head on functional datums
4.1Number and distribution of points per feature4.2Sampling for planes, cylinders and circles4.3Scanning versus discrete points4.4Approach speed and contact force4.5Stylus radius compensation4.6Filtering scan data4.7Constructed features and intersections4.8Accessibility and orientation planning4.9Cycle time optimisation4.10Practice: probing strategy for a timing cover
5.1DMIS language and ISO 22093 standard5.2Software: PC-DMIS, Calypso and Metrolog5.3Programming from CAD with PMI5.4Simulation and collision detection5.5Parametric programs and loops5.6Variables, conditions and subroutines5.7Integration with QIF5.8Programme version control5.9Batch execution and palletising5.10Workshop: offline programme for a suspension bracket
6.1GD&T interpretation according to ISO 1101 and ASME Y14.56.2Flatness, straightness, circularity and cylindricity6.3Orientation: parallelism, perpendicularity and angularity6.4Position and maximum material requirement6.5Profile of a line and of a surface6.6Concentricity, coaxiality and run-out6.7Algorithms: least squares, minimum zone and envelope6.8Differences between evaluation software6.9Common interpretation errors6.10Case study: hole position evaluation on a flange
7.1Measurement uncertainty with the GUM7.2Contributions from machine, workpiece and environment7.3Calibrated workpiece method ISO 15530-37.4Decision rule according to ISO 14253-17.5Tolerance-to-uncertainty ratio7.6Graphical and tabular reports7.7Data export to SPC7.8Traceability and calibration certificates7.9ISO/IEC 17025 accreditation7.10Practice: uncertainty budget for a diameter
8.1Workpiece selection and requirements8.2Analysis of drawing and datums8.3Probe selection and fixturing8.4Alignment and coordinate system8.5Offline programming and simulation8.6Execution and programme validation8.7Uncertainty budget8.8Final measurement report8.9Project report and presentation8.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is PC-DMIS, ZEISS CALYPSO, PolyWorks Inspector, Metrolog X4, CMM-Manager, in free, academic or evaluation versions. Test cases are based on real procedures from dimensional metrology laboratories, first-article inspection and probe calibration. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the types of coordinate measuring machines and their verification.
Select and calibrate sensors and probe configurations.
Establish alignments and coordinate systems from references.
Define probing strategies suited to each geometric feature.
Program CMM offline using a CAD model and in DMIS language.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The programme uses PC-DMIS, ZEISS CALYPSO, PolyWorks Inspector, Metrolog X4 and CMM-Manager. Free, academic or evaluation versions are used, and the tutor will indicate a free alternative where one exists.
An SEIUM in-house diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or diploma in the same area are recognised towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Tolerance Analysis and Virtual Reassembly
Online 800-hour Postgraduate Diploma in Tolerance Analysis and Virtual Reassembly. 8 modules with ASME Y14.5-2018 (dimensioning and tolerancing), ISO 1101 (geometrical tolerances) and 3DCS Variation Analyst.…
Postgraduate Diploma in Market Indices and Classic Trends
Online 800-hour Postgraduate Diploma in Market Indices and Classic Trends. 8 modules covering International Valuation Standards (IVS, IVSC), RICS Valuation – Global Standards (Red Book) and…
Postgraduate Diploma in 3D Scanning for Heritage (Structured Light/Laser)
Online 800-hour Postgraduate Diploma in 3D Scanning for Heritage (Structured Light/Laser). 8 modules covering VDI/VDE 2634 Part 2 (optical 3D measuring systems based on projection), VDI/VDE…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships