Construction Vehicles Course: Backhoe Loaders
300-hour online course in construction vehicles: backhoe loaders. 6 modules covering ISO 8812 (backhoe loaders: terminology and specifications), ISO 20474-4 (safety requirements for backhoe loaders) and JCB LiveLink. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the concept of the mixed backhoe loader and its ranges.
Calculate the working capacity of the loader bucket and the digging arm.
Select attachments suited to each urban application.
Plan maintenance and monitor wear.
Evaluate operating costs on urban sites.
Apply safety and noise regulations in urban environments.
Develop a project for selecting and using a backhoe loader.
Who it's for
- Machinery foreman on urban construction sites who wants to specialise in Construction Vehicles: backhoe loaders.
- Site manager for urban development works who wants to specialise in Construction Vehicles: backhoe loaders.
- Maintenance technician for backhoe loaders who wants to specialise in Construction Vehicles: backhoe loaders.
- Municipal fleet manager who wants to specialise in Construction Vehicles: backhoe loaders.
- Technical sales representative for compact machinery who wants to specialise in Construction Vehicles: backhoe loaders.
- Health and safety coordinator who wants to specialise in Construction Vehicles: backhoe loaders.
- Engineering or science graduates looking to enter urban construction.
What you'll work with
- ISO 8812 (backhoe loaders: terminology and specifications)
- ISO 20474-4 (safety requirements for backhoe loaders)
- ISO 14397-1 (rated operating load)
- ISO 3471 (ROPS structures)
- Directive 2000/14/EC (noise emitted by equipment used outdoors)
- Regulation (EU) 2023/1230 (machinery)
- Royal Decree 1215/1997 (work equipment)
6 modules · 300 h
1.1Mixed machine: front loader and rear backhoe1.2Ranges by weight and by power1.3Single and double traction; two- and four-wheel steering1.4Standard arm and extending arm1.5Stabilisers and their configuration1.6Loader bucket: types and capacities1.7Backhoe buckets and their width1.8Quick coupler and implements1.9Reading the manufacturer's technical data sheet1.10Workshop: specifying a machine for three jobs
2.1Digging depth and reach2.2Breakout and penetration force2.3Loader lifting height and dumping height2.4Lifting capacity of the backhoe2.5Output in trenching and loading2.6Characteristic cycles and times2.7Output compared with excavator and loader2.8Versatility versus specialisation2.9Sizing the equipment for a small site2.10Practice: output calculation and selection
3.1Hydraulics: pumps, flow rates and control valve3.2Auxiliary circuits for implements3.3Hydraulic breaker and its sizing3.4Auger, trencher and sweeper3.5Forks and load handling3.6Transmission, gear change and driving modes3.7Cab, visibility and ergonomics3.8Control electronics and diagnostics3.9Guidance systems and depth control3.10Practice: selecting implements for a job
4.1Hour-based maintenance schedule4.2Teeth, corner protectors and blades4.3Pins, bushes and machine play4.4Tyres and pressures by application4.5Hydraulic circuit and filtration4.6Oil analysis and signs of wear4.7Common repairs and their cost4.8Critical spare parts and stock4.9Maintenance cost per hour4.10Practice: maintenance plan for a machine
5.1Hourly ownership and operating cost5.2Consumption by type of work5.3Depreciation, residual value and service life5.4Buy, hire or subcontract5.5Work on urban sites and space limitations5.6Working alongside buried services5.7Impact on traffic and signage5.8Noise and working hours in urban areas5.9Transfers between sites and associated cost5.10Practice: budget for a small site
6.1Machinery and emissions regulations6.2Travel on public roads and requirements6.3Lifting loads with the machine: conditions6.4Operator training and authorisation6.5Coordination of activities on site6.6Main risks and preventive measures6.7Mandatory machine documentation6.8Usage and performance indicators6.9Common errors in machine selection6.10Final project: machinery plan for an urban development site
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded lessons and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is JCB LiveLink, Advanced Excel, AutoCAD, Presto, in free, academic or evaluation versions. The practical work draws on real procedures for output studies in urban trenching, review of attachments and couplers, and cost studies per machine hour. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the concept of the mixed backhoe loader and its ranges.
Calculate the working capacity of the loader bucket and the digging arm.
Select attachments suited to each urban application.
Plan maintenance and monitor wear.
Evaluate operating costs on urban sites.
Where this takes you
Requirements
- No prior degree required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulations.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The course uses JCB LiveLink, Advanced Excel, AutoCAD, Presto. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM Diploma upon passing continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Check the recognition policy when you enrol.
Related programmes
Course in Longitudinal Dynamics on Dunes and Loose Sand
300-hour online course in longitudinal dynamics on dunes and loose sand. 6 modules covering ISO 8855 (vehicle dynamics: vocabulary), SAE J670 (vehicle dynamics terminology) and MATLAB/Simulink.…
Course in Inflation Pressures for Variable Terrain
Online 300-hour course in inflation pressures for variable terrain. 6 modules covering the ETRTO Standards Manual (tyre and rim standards), ISO 4251 (agricultural tyres) and manufacturers'…
Agricultural Machinery Course: Modern Tractors
The Precision Agriculture with Drones Course trains participants in the use of drones and remote sensors to optimise agricultural management. It explores remote sensing, geospatial data…
More in Off-Road, Special Vehicles & Machinery
All Off-Road, Special Vehicles & Machinery programmes → · How to apply · Fees & financing · Scholarships