Postgraduate Diploma in Composite Panel and Joint Validation
Online 800-hour Postgraduate Diploma in Composite Panel and Joint Validation. 8 modules covering ASTM D3039, ASTM D5961 and Abaqus. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Select composite materials for structural panels.
Design adhesive, mechanical and hybrid joints.
Carry out coupon testing in accordance with ASTM standards.
Test joints and interpret their failure modes.
Validate panels using the test pyramid.
Apply non-destructive inspection techniques.
Manage quality in composite manufacturing.
Who it's for
- Composites engineer who wants to specialise in Composite Panel and Joint Validation.
- Test engineer who wants to specialise in Composite Panel and Joint Validation.
- Quality engineer who wants to specialise in Composite Panel and Joint Validation.
- Structural analysis engineer who wants to specialise in Composite Panel and Joint Validation.
- Materials laboratory technician who wants to specialise in Composite Panel and Joint Validation.
- Non-destructive testing inspector who wants to specialise in Composite Panel and Joint Validation.
- Engineering or science graduates looking to enter motorsport.
What you'll work with
- ASTM D3039
- ASTM D5961
- ASTM D7136
- ASTM D7137
- ASTM D2344
- ASTM D1002
- ISO 4587
- CMH-17
8 modules · 800 h
1.1Standard and intermediate modulus carbon fibres1.2Epoxy, cyanate and thermoplastic matrices1.3Prepregs and their storage1.4Honeycomb and foam cores1.5Mechanical design properties1.6Effects of humidity and temperature1.7A and B allowables1.8Material selection criteria1.9Qualification of new suppliers1.10Case study: material selection for a side panel
2.1Single and double lap adhesive joints2.2Bolted and riveted joints2.3Hybrid adhesive and fastener joints2.4Inserts in sandwich panels2.5Stress distribution in the overlap2.6Joint failure modes2.7Surface preparation and abrasion2.8Structural epoxy and methacrylate adhesives2.9Durability against fluids and temperature2.10Workshop: sizing an adhesive joint
3.1Laminate tensile testing according to ASTM D30393.2Compression with combined fixture3.3In-plane shear by ±45° tensile testing3.4Three- and four-point bending3.5Interlaminar shear with short beam3.6Drop-weight impact3.7Compression after impact3.8Tensile fatigue of laminates3.9Statistical treatment of results3.10Laboratory: interlaminar shear test
4.1Single lap shear test4.2Peel and pull-off test4.3Bearing strength in holes4.4Fastener pull-through test4.5Fatigue of adhesive joints4.6Accelerated environmental ageing4.7Analysis of fracture surfaces4.8Adhesive, cohesive and mixed modes4.9Documentation of test results4.10Practical: analysis of a lap shear test
5.1Building block test pyramid5.2Coupons, elements and subcomponents5.3Full-scale panel testing5.4Impact testing of panels5.5FIA homologation tests for structures5.6Correlation between analysis and testing5.7Panel acceptance criteria5.8Structural validation report5.9Design change management5.10Case study: validation of an anti-intrusion panel
6.1Immersion and contact ultrasonics6.2Interpretation of A-scans and C-scans6.3Active pulse thermography6.4Radiography and computed tomography6.5Tap testing of sandwich panels6.6Shearography for debonding6.7Classification of detected defects6.8Acceptance and rejection criteria6.9Qualification of inspectors6.10Practical: interpreting a C-scan
7.1Quality systems for manufacturing7.2Statistical process control7.3Management of non-conformities7.4Process and product audits7.5Traceability of materials and curing7.6Supplier control7.7Corrective and preventive actions7.8Aerospace quality requirements7.9Digital quality records7.10Case study: management of a detected delamination
8.1Definition of the panel and its joints8.2Selection of materials and adhesives8.3Joint design8.4Test plan for coupons and joints8.5Panel validation campaign8.6Non-destructive inspection plan8.7Analysis of results8.8Conclusions on design fitness8.9Report and presentation8.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the enrolment period, which makes it possible to combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Abaqus, ANSYS Composite PrepPost, Altair HyperWorks, MATLAB, Fibersim, in free, academic or evaluation versions. Tests are studied using real procedures for mechanical testing of laminate coupons, testing of adhesive joints and ultrasonic inspection of panels. Assessment is continuous by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Select composite materials for structural panels.
Design adhesive, mechanical and hybrid joints.
Carry out coupon testing in accordance with ASTM standards.
Test joints and interpret their failure modes.
Validate panels using the test pyramid.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 total hours spread over 6 to 8 months. That is between 10 and 15 hours per week on average, compatible with full-time work.
The programme uses Abaqus, ANSYS Composite PrepPost, Altair HyperWorks, MATLAB and Fibersim. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM diploma awarded upon passing the continuous assessment and the integrative final project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Thermal Management and Lightweighting for Hill Climbs
Online 800-hour Postgraduate Diploma in Thermal Management and Lightweighting for Hill Climbs. 8 modules covering the FIA International Sporting Code, the FIA European Hill Climb Championship…
Postgraduate Diploma in Heat Exchangers, Shrouds and Thermal Packaging
Online 800-hour Postgraduate Diploma in Heat Exchangers, Shrouds and Thermal Packaging. 8 modules with TEMA Standards, ASME PTC 30 and GT-SUITE. Assigned tutor and open enrolment.
Postgraduate Diploma in Racing Pipelines and Dashboards
800-hour online Postgraduate Diploma in Racing Pipelines and Dashboards. 8 modules covering ASAM MDF 4.2, ISO/IEC 25012 and Apache Kafka. Assigned tutor and open enrolment.
More in Automotive & Motorsport
All Automotive & Motorsport programmes → · How to apply · Fees & financing · Scholarships