Postgraduate Diploma in Thermal Management and Lightweighting for Hill Climbs
Online 800-hour Postgraduate Diploma in Thermal Management and Lightweighting for Hill Climbs. 8 modules covering the FIA International Sporting Code, the FIA European Hill Climb Championship Regulations and MoTeC i2 Pro. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the technical demands of a hill climb.
Design cooling systems for low speeds.
Manage brake and transmission temperatures.
Compensate for power loss at altitude.
Reduce vehicle mass using lightweight materials.
Optimise mass distribution and centre of gravity.
Integrate lightweight, reliable electronics.
Who it's for
- Hill-climb vehicle preparers who want to specialise in Thermal Management and Lightweighting for Hill Climbs.
- Competition thermal engineers who want to specialise in Thermal Management and Lightweighting for Hill Climbs.
- Composite materials engineers who want to specialise in Thermal Management and Lightweighting for Hill Climbs.
- Competition electronics technicians who want to specialise in Thermal Management and Lightweighting for Hill Climbs.
- Track engineers who want to specialise in Thermal Management and Lightweighting for Hill Climbs.
- Hill-climb drivers who want to specialise in Thermal Management and Lightweighting for Hill Climbs.
- Graduates in engineering or science looking to enter hill climbing.
What you'll work with
- FIA International Sporting Code
- FIA European Hill Climb Championship Regulations
- Appendix J, Article 253: safety equipment
- Appendix J, Article 259: sports prototype vehicles
- FIA Standard 8856-2018 for fire-resistant clothing
- FIA Standard 8865-2015 for fuel tanks
8 modules · 800 h
1.1Gradients and elevation changes along the route1.2Altitude variation and air density1.3Power loss at altitude1.4Sustained low speeds1.5Hairpin bends and traction1.6Uneven and potholed surfaces1.7Safety on mountain routes1.8European Hill Climb Championship regulations1.9Types of hill-climb vehicles1.10Case study: altitude profile of a climb
2.1Engine thermal balance on a climb2.2Radiators and their sizing2.3Airflow at low speed2.4Fans and electronic control2.5Oil cooling2.6Intercoolers in turbo engines2.7Intake air temperature2.8Thermal management while waiting at the start2.9Temperature logging2.10Practical: sizing a radiator for low speed
3.1Brakes on downhill sections3.2Brake cooling ducts3.3Disc and pad temperatures3.4Gearbox cooling3.5Differentials and temperature3.6Clutch use on uphill starts3.7High-temperature fluids3.8Sensors and alarms3.9Thermal protection of the cabin3.10Workshop: brake cooling with NACA ducts
4.1Altitude compensation with a turbo4.2Boost control by absolute pressure4.3Intake air temperature at altitude4.4Turbo lag at low speed4.5Anti-lag systems and how they work4.6Calibration for altitude4.7Thermal risks of anti-lag4.8Alternatives with naturally aspirated engines4.9Performance comparison4.10Laboratory: power correction for altitude
5.1Power-to-weight ratio on a climb5.2Carbon composite materials5.3Titanium and magnesium alloys5.4Reducing unsprung mass5.5Lightweight panels and bodywork5.6Regulatory ballast and minimum weight5.7Topology optimisation of brackets5.8Stiffness versus weight5.9Safety and lightweighting5.10Practical: weight-reduction plan for a road car
6.1Height of the centre of gravity6.2Weight distribution by axle6.3Battery and fuel tank position6.4Yaw moment of inertia6.5Effect on traction on gradients6.6Weighing on scales6.7Ballast and its placement6.8Influence on balance6.9Inertia calculations6.10Case study: relocating components to improve weight distribution
7.1Lightweight lithium batteries7.2Simplified, lightweight wiring7.3Compact competition ECUs7.4Electrical power management7.5Hill starts7.6Lightweight data acquisition systems7.7Traction control on climbs7.8Electronic reliability in heat7.9Electronics regulations7.10Workshop: lightweight competition wiring harness
8.1Vehicle and climb selection8.2Baseline thermal balance8.3Cooling proposal8.4Mass reduction plan8.5Weight redistribution8.6Performance simulation8.7Writing the technical report8.8Review with the technical team8.9Dissertation and presentation8.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MoTeC i2 Pro, ANSYS Fluent, Altair OptiStruct, SolidWorks, AiM Race Studio 3, in free, academic or evaluation versions. Tests are studied using real procedures for the thermal balance of a hill-climb vehicle, a weight-reduction plan and power correction for altitude. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Analyse the technical demands of a hill climb.
Design cooling systems for low speeds.
Manage brake and transmission temperatures.
Compensate for power loss at altitude.
Reduce vehicle mass using lightweight materials.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours, spread over 6 to 8 months. That is between 10 and 15 hours a week on average, compatible with a full-time job.
You will work with MoTeC i2 Pro, ANSYS Fluent, Altair OptiStruct, SolidWorks and AiM Race Studio 3. Free, academic or evaluation versions are used, and the tutor will indicate a free alternative where one exists.
An SEIUM diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official Ministry qualification.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in DIL Correlation and Driver Parameterisation
Online 800-hour Postgraduate Diploma in DIL Correlation and Driver Parameterisation. 8 modules covering ISO 8855:2011 vehicle dynamics, vocabulary, SAE J2944 driving performance measures and VI-grade DiM…
Postgraduate Diploma in Set-Up for Banking: Springs, Bars and Weight Jackers
Online 800-hour Postgraduate Diploma in Set-Up for Banking: Springs, Bars and Weight Jackers. 8 modules covering the NASCAR Rule Book, NASCAR Cup Series Technical Regulations and…
Postgraduate Diploma in Barriers, Protections and Impact Energy Management
Online 800-hour Postgraduate Diploma in Barriers, Protections and Impact Energy Management. 8 modules with Appendix O of the FIA International Sporting Code (circuits), FIA Standard 3501-2010…
More in Automotive & Motorsport
All Automotive & Motorsport programmes → · How to apply · Fees & financing · Scholarships