Diploma in SHM and Structural Monitoring of Bridges
Online postgraduate diploma of 800 hours in SHM and structural health monitoring of bridges, structured in 8 modules covering monitoring objectives, sensors and measurement, data acquisition and communications, signal processing, modal identification and damage detection, complementary techniques and data-driven decision-making, with an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Define the objectives and architecture of a structural monitoring system.
Select suitable sensors for each variable and defect.
Design robust acquisition and communications systems.
Process signals and compensate for environmental effects.
Identify modal properties and possible damage.
Integrate complementary remote inspection techniques.
Set alert thresholds that are useful for decision-making.
Who it's for
- Structural monitoring engineers.
- Instrumentation specialists.
- Structural data analysts.
- Bridge engineers.
- Digital twin engineers.
- Structural auscultation technicians.
- Engineering or science graduates looking to move into road infrastructure.
What you'll work with
- ISO 16587 (performance parameters for assessing structural health monitoring)
- ISO 14963 (guidelines for dynamic tests and investigations on bridges and viaducts)
- ISO 13822 (assessment of existing structures)
- ISO 18649 (evaluation of results from dynamic tests on bridges)
- ISO 4866 (measurement and evaluation of vibration effects on fixed structures)
- EN 1990 (Eurocode — basis of structural design)
- Spanish Ministry of Public Works guide for load testing of road bridges (procedures for static and dynamic load tests)
- ARTeMIS Modal
- MATLAB
- NI LabVIEW
- Python
- Bentley iTwin
8 modules
1.1Objectives of structural monitoring1.2Levels of damage detection1.3Inspection versus continuous monitoring1.4Defects that justify monitoring1.5Architecture of an SHM system1.6Static and dynamic monitoring1.7International reference cases1.8Cost-benefit analysis1.9Requirements of the infrastructure owner1.10Workshop: SHM objectives for an existing bridge
2.1Resistive strain gauges2.2Fibre optics with Bragg gratings and distributed sensing2.3MEMS and seismic accelerometers2.4Precision inclinometers and clinometers2.5LVDT displacement transducers2.6Embedded corrosion sensors2.7Temperature and weather stations2.8GNSS for measuring displacements2.9Calibration and measurement uncertainty2.10Practical exercise: sensor selection for a viaduct
3.1Data acquisition equipment3.2Sampling frequency and aliasing3.3Time synchronisation of channels3.4Wireless sensor networks3.5Power supply and energy autonomy3.6LTE and LoRaWAN communications3.7Cloud data storage3.8Cybersecurity of the monitoring system3.9Robustness against the outdoor environment3.10Lab: configuring a wireless network
4.1Filtering and noise removal4.2Fourier transform and spectra4.3Time-frequency analysis with wavelets4.4Compensation of thermal effects4.5Outlier detection4.6Long-term trends4.7Correlation between measured variables4.8Data compression and reduction4.9Time series visualisation4.10Case study: thermal compensation of strains
5.1Operational modal analysis5.2FDD and SSI methods5.3Automatic mode tracking5.4Environmental influence on frequencies5.5Vibration-based damage indicators5.6Finite element model updating5.7Digital twins of bridges5.8Machine learning for damage detection5.9False alarm control5.10Practical exercise: modal identification with SSI
6.1Drone inspection6.2Photogrammetry and point clouds6.3Satellite radar interferometry (InSAR)6.4Non-destructive testing of concrete6.5Acoustic emission in cables6.6Ultrasound and ground-penetrating radar6.7Static and dynamic load tests6.8Computer vision for crack detection6.9Data integration in BIM6.10Case study: InSAR applied to a viaduct
7.1Thresholds and alert systems7.2Structural safety assessment7.3Structural reliability and probability of failure7.4Value of monitoring information7.5Integration with asset management7.6Dashboards for the owner7.7Monitoring standards and guidelines7.8Maintenance of the monitoring system7.9Procurement of SHM services7.10Workshop: threshold-based alert system
8.1Selecting the bridge under study8.2Objectives and risks to be monitored8.3Sensor network design8.4Acquisition and communications system8.5Data processing8.6Damage identification strategy8.7Alerts and decision support8.8System budget8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so it can be combined with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is ARTeMIS Modal, MATLAB, NI LabVIEW, Python and Bentley iTwin, in free, academic or evaluation versions. Practical work is based on real procedures: design and installation of sensor networks on bridges, operational modal analysis of viaducts and integration of InSAR and inspection data. Assessment is continuous by module, plus the final project.
Standards covered: ISO 16587, ISO 14963, ISO 13822, ISO 18649, ISO 4866, EN 1990, Spanish Ministry of Public Works guide for load testing of road bridges
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with ARTeMIS Modal, MATLAB, NI LabVIEW, Python and Bentley iTwin, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Vibration Mitigation and Damping Devices
Online postgraduate diploma of 800 hours in vibration mitigation and damping devices. 8 modules covering vibration sources, experimental dynamic characterisation, tuned mass dampers, viscous and viscoelastic…
Diploma in VSM, Kaizen and Productivity Improvement
Online postgraduate diploma of 800 hours in VSM, Kaizen and productivity improvement. 8 modules covering value stream mapping, waste analysis, Kaizen and continuous improvement, Lean production…
Postgraduate Diploma in Mechanical-Biological Treatment and Recovery
Online 800-hour Postgraduate Diploma in Mechanical-Biological Treatment and Recovery. 8 modules covering Directive 2008/98/CE (waste framework), Directive 1999/31/CE (landfill of waste) and SuperPro Designer. Assigned tutor…
More in Civil, Rail & Smart Cities
All Civil, Rail & Smart Cities programmes → · How to apply · Fees & financing · Scholarships