Diploma in Ground Segment Architecture and Operations
Online postgraduate diploma of 800 hours in ground segment architecture and operations. 8 modules covering ground segment architecture, ground stations, mission control centres, mission planning, flight operations, payload data processing and ground segment as a service, with an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Design the architecture of a space ground segment.
Specify ground stations and their antennas.
Configure mission control systems.
Plan operations and communication passes.
Carry out operating procedures across the mission phases.
Organise payload data processing and distribution.
Assess ground segment as a service models.
Who it's for
- Ground segment engineers.
- Satellite operations engineers.
- Flight controllers.
- Ground station engineers.
- Mission planners.
- Data processing engineers.
- Engineering or science graduates looking to join a satellite operator.
What you'll work with
- ECSS-E-ST-70C (ground systems and operations)
- ECSS-E-ST-70-41C (telemetry and telecommand packet utilisation (PUS))
- ECSS-E-ST-70-31C (ground systems and operations: monitoring and control data definition)
- CCSDS 133.0-B (Space Packet Protocol)
- CCSDS 132.0-B (TM Space Data Link Protocol)
- CCSDS 401.0-B (radio frequency and modulation systems)
- ITU Radio Regulations (international spectrum regulation)
- Yamcs
- ESA SCOS-2000
- Open MCT
- GNU Radio
- STK
8 modules
1.1Ground segment elements1.2Requirements according to ECSS-E-ST-70C1.3Interfaces with the space segment1.4Control centre and mission centres1.5Terrestrial networks and communications1.6Availability and redundancy1.7Ground segment cybersecurity1.8Life cycle costs1.9Ground segment reviews1.10Workshop: ground segment architecture for a LEO mission
2.1Parabolic antennas and tracking2.2S, X and Ka bands2.3G/T figure of merit2.4Front end and receivers2.5Modems and baseband units2.6Station networks and polarisation2.7Shared station services2.8Licensing and coordination2.9Station maintenance2.10Practical exercise: G/T calculation for a station
3.1Monitoring and control systems3.2Telemetry and telecommand database3.3PUS services3.4Automated procedures3.5Telemetry visualisation3.6Data archiving and retrieval3.7Satellite simulator3.8Alarm management3.9Interfaces with flight dynamics3.10Lab: Yamcs configuration
4.1Pass planning4.2Payload planning4.3Onboard resource constraints4.4Automated planning4.5User request management4.6Scheduling of time-tagged telecommands4.7Conflicts and priorities4.8Constellation planning4.9Service indicators4.10Practical exercise: weekly plan for an observation satellite
5.1Launch and LEOP5.2In-orbit commissioning5.3Routine operations5.4Anomaly management5.5Contingency procedures5.6Shifts and human factors5.7Controller training5.8End-of-life operations5.9Lessons from operations5.10Case study: simulation of a LEOP contingency
6.1Processing chains6.2Product levels6.3Calibration and validation6.4Catalogues and metadata6.5Distribution to users6.6Long-term archiving6.7Cloud processing6.8Quality of service6.9Data policies6.10Case study: optical image processing chain
7.1GSaaS models7.2Commercial station networks7.3Modem virtualisation7.4Software-defined radio7.5Containers and orchestration7.6Operations automation7.7Cloud cybersecurity7.8Cost models7.9Suppliers and contracts7.10Workshop: comparison of GSaaS offers
8.1Mission requirements8.2Proposed architecture8.3Station network8.4Mission control system8.5Concept of operations8.6Data processing chain8.7Cost and risk analysis8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Yamcs, ESA SCOS-2000, Open MCT, GNU Radio and STK, in free, academic or evaluation versions. Practical work is based on real procedures for configuring a mission control system, planning ground station passes and simulating LEOP operations. Assessment is continuous by module, plus the final project.
Standards covered: ECSS-E-ST-70C, ECSS-E-ST-70-41C, ECSS-E-ST-70-31C, CCSDS 133.0-B, CCSDS 132.0-B, CCSDS 401.0-B, ITU Radio Regulations.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Yamcs, ESA SCOS-2000, Open MCT, GNU Radio and STK, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Post-Processing, Inspection and Traceability AM
Online postgraduate diploma of 800 hours in AM post-processing, inspection and traceability. 8 modules covering the additive post-processing chain, heat treatment and HIP, surface finishing, non-destructive…
Diploma in Space Debris Mitigation and End of Life
Online postgraduate diploma of 800 hours in space debris mitigation and end of life: 8 modules covering the debris environment, mitigation regulations, design for mitigation, disposal…
Diploma in Aeroacoustic Noise and Mitigation in Aircraft
Online postgraduate diploma of 800 hours in Aeroacoustic Noise and Mitigation in Aircraft. 8 modules covering applied acoustics, aeroacoustic theory, engine and airframe noise, aeroacoustic simulation,…
More in Aerospace, UAM, Drones & Space
All Aerospace, UAM, Drones & Space programmes → · How to apply · Fees & financing · Scholarships