Apply now
CourseInsurance, Risk & Actuarial Data Enrolment open

Course in Cryogenics in Nuclear Fusion

Online 300 h course in cryogenics in nuclear fusion. 6 modules covering EN 13458 (static vacuum-insulated cryogenic vessels), Directive 2014/68/EU (pressure equipment) and HEPAK. Assigned tutor and open enrolment.

Duration300 h
ModeOnline
Start datesOctober / March
LocationEurope (Madrid)
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor
Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Apply low-temperature thermodynamics to cryogenic design.

02

Describe the cycles and equipment of a helium cryogenic plant.

03

Explain the refrigeration requirements of superconducting magnets.

04

Design distribution and thermal insulation systems.

05

Analyse the operation of cryopumps and fuel supply.

06

Identify safety risks associated with cryogenic fluids.

07

Develop a cryogenic system project for fusion.

Profile

Who it's for

  • Cryogenic engineer who wants to specialise in Cryogenics in nuclear fusion.
  • Superconducting magnet engineer who wants to specialise in Cryogenics in nuclear fusion.
  • Helium plant engineer who wants to specialise in Cryogenics in nuclear fusion.
  • Vacuum and cryogenics technician who wants to specialise in Cryogenics in nuclear fusion.
  • Fusion process engineer who wants to specialise in Cryogenics in nuclear fusion.
  • Cryogenic gas safety specialist who wants to specialise in Cryogenics in nuclear fusion.
  • Graduates in engineering or science seeking to join international fusion projects.
Standards & tools

What you'll work with

  • EN 13458 (static vacuum-insulated cryogenic vessels)
  • Directive 2014/68/EU (pressure equipment)
  • ISO 21013 (pressure relief accessories for cryogenic vessels)
  • EN 13445 (unfired pressure vessels)
  • IEC 61788 (superconductivity)
  • ISO 21014 (insulation performance of cryogenic vessels)
Syllabus

6 modules · 300 h

  1. 1.1Cryogenic temperature scale
  2. 1.2Properties of helium-4 and helium-3
  3. 1.3Superfluid helium and the lambda point
  4. 1.4Hydrogen and its liquid isotopes
  5. 1.5Specific heat of materials at 4 K
  6. 1.6Thermal conductivity at low temperature
  7. 1.7Differential thermal contraction
  8. 1.8Cryogenic refrigeration cycles
  9. 1.9Carnot efficiency and actual power
  10. 1.10Workshop: calculation of thermal load at 4.5 K
  1. 2.1Claude and Collins cycles
  2. 2.2Expansion turbines
  3. 2.3Helium compressors
  4. 2.4Plate heat exchangers
  5. 2.5Joule-Thomson valves
  6. 2.6ITER cryogenic plant
  7. 2.7Helium storage and recovery
  8. 2.8Cryogenic plant control
  9. 2.9Reliability and availability
  10. 2.10Practice: simulation of a Claude cycle
  1. 3.1NbTi and Nb3Sn superconductors
  2. 3.2High-temperature REBCO superconductors
  3. 3.3Cable-in-conduit conductors (CICC)
  4. 3.4Toroidal and poloidal field coils
  5. 3.5Central solenoid
  6. 3.6Quench: detection and protection
  7. 3.7Temperature margins
  8. 3.8AC losses and nuclear heating
  9. 3.920 T SPARC magnet
  10. 3.10Case study: quench protection in ITER
  1. 4.1Cryostat and insulation vacuum
  2. 4.280 K thermal shields
  3. 4.3Multilayer insulation (MLI)
  4. 4.4Cryogenic transfer lines
  5. 4.5Cold distribution box
  6. 4.6Low-conduction thermal supports
  7. 4.7Temperature measurement with Cernox sensors
  8. 4.8Flow and level measurement
  9. 4.9Leaks and helium leak detection
  10. 4.10Laboratory: thermal balance of an 80 K shield
  1. 5.1Cryosorption pumping with activated carbon
  2. 5.2Cryopump regeneration
  3. 5.3Divertor pumping
  4. 5.4Frozen pellet injection
  5. 5.5Deuterium pellet production
  6. 5.6Tritium management in cryopumps
  7. 5.7Safety with helium and cold gases
  8. 5.8Asphyxiation by oxygen displacement
  9. 5.9EN 13458 standard for cryogenic vessels
  10. 5.10Case study: ITER torus cryopump system
  1. 6.1Thermal requirements of the machine
  2. 6.2Load balance by levels
  3. 6.3Plant sizing
  4. 6.4Distribution design
  5. 6.5Quench protection
  6. 6.6Instrumentation and control
  7. 6.7Safety analysis
  8. 6.8Cost and consumption estimation
  9. 6.9Report and presentation
  10. 6.10Final review with the tutor
Methodology, software & labs

How you'll learn

100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it compatible with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is HEPAK, Aspen HYSYS, EES (Engineering Equation Solver), ANSYS Mechanical, REFPROP, in free, academic or evaluation versions. Tests are studied using real procedures for cooldown tests of superconducting magnets, thermal load measurement in cryostats and cryopump tests. Assessment is continuous, per module, plus the final integrating project.

Accredited laboratories(EN ISO/IEC 17025) with a rotor rig, EMC/Lightning pre-compliance, HIL/SIL, vibration/acoustics.
Evidence-oriented Master's Thesis:safety case, test plan, compliance dossier and operating limits.
Industry mentoring:lecturers with experience in training, , eVTOL/UAM and flight test.
Flexible format(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:a safety-by-design approach, with cyber-OT, DIH and compliance as its pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Thermal requirements of the machine

Apply low-temperature thermodynamics to cryogenic design.

Load balance by levels

Describe the cycles and equipment of a helium cryogenic plant.

Plant sizing

Explain the refrigeration requirements of superconducting magnets.

Distribution design

Design distribution and thermal insulation systems.

Quench protection

Analyse the operation of cryopumps and fuel supply.

Career opportunities

Where this takes you

Cryogenic engineerSuperconducting magnet engineerHelium plant engineerVacuum and cryogenics technicianFusion process engineerCryogenic gas safety specialist
Admissions & scholarships

Requirements

  • No prior qualification is required.
  • An internet connection and a computer capable of running the programme's software.
  • A level of Spanish sufficient to follow technical standards documentation.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme comprises 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with full-time work.

You will work with HEPAK, Aspen HYSYS, EES (Engineering Equation Solver), ANSYS Mechanical, REFPROP. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.

A SEIUM Institute diploma upon passing the continuous assessment and the final integrating project. It is in-house training, not an official qualification from the Ministry.

Yes. Modules passed in a Course or Postgraduate Diploma in the same area are credited towards the advanced programme. Check the recognition policy when you enrol.

Keep exploring

Related programmes

See all in Insurance, Risk & Actuarial Data
Course550 $

Course in Risk Correlation in Global Reinsurance

Online 300-hour course in risk correlation in global reinsurance. 6 modules covering Delegated Regulation (EU) 2015/35 (correlation matrices of the standard formula), Directive 2009/138/EC (Solvency II)…

300 hHybridAutomotive & Motorsport
Course620 $

Course in Ethics of Genetic Detection Technologies

Online 300-hour course in ethics of genetic detection technologies. 6 modules covering the Biological Weapons Convention (1972), the Oviedo Convention on Human Rights and Biomedicine (1997)…

300 hOnlineInsurance, Risk & Actuarial Data
Course750 $

Course in Ethics in Military Energy Autonomy

Online 300-hour course in ethics in military energy autonomy. 6 modules covering ISO 50001:2018 (energy management), Directive (EU) 2023/1791 (energy efficiency) and HOMER Pro. Assigned tutor…

300 hOnlineAutomotive & Motorsport
Course in Cryogenics in Nuclear FusionEnrol
Related programmes

More in Naval, Offshore & Sports Nautical

Course in European Regulations on Nuclear WasteView programme →Course on supersonic aerothermodynamicsView programme →Construction Fleet Management CourseView programme →Sustainable Urban Drainage Systems (SUDS) Design CourseView programme →Course on the Impact of Climate Change on Coastal AreasView programme →Course in Atmospheric Radiological Dispersion SimulationView programme →

All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.