Course in Standards for Environmental Dosimetry
Online 300-hour course in standards for environmental dosimetry. 6 modules covering IEC 62387 (passive integrating dosimetry systems), IEC 61017 (equipment for photon measurement in environmental monitoring) and QGIS. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the quantities and sources of environmental radiation.
Compare detectors and measurement techniques used in environmental dosimetry.
Design a monitoring network according to regulatory criteria.
Apply sampling and laboratory analysis procedures.
Calculate detection limits and standardised decision thresholds.
Ensure data quality and prepare monitoring reports.
Develop an integrated environmental dosimetry project.
Who it's for
- Environmental dosimetry technician wishing to specialise in Standards in Environmental Dosimetry.
- Specialist in radiological monitoring networks wishing to specialise in Standards in Environmental Dosimetry.
- Environmental radioactivity laboratory technician wishing to specialise in Standards in Environmental Dosimetry.
- Radiation protection expert wishing to specialise in Standards in Environmental Dosimetry.
- Laboratory quality manager wishing to specialise in Standards in Environmental Dosimetry.
- Radiological monitoring inspector wishing to specialise in Standards in Environmental Dosimetry.
- Engineering or science graduates seeking to join regulatory bodies.
What you'll work with
- IEC 62387 (passive integrating dosimetry systems)
- IEC 61017 (equipment for photon measurement in environmental monitoring)
- ISO 11929 (characteristic limits in ionising radiation measurements)
- IAEA RS-G-1.8 (environmental and source monitoring)
- Recommendation 2000/473/Euratom (environmental radioactivity monitoring)
- ISO/IEC 17025 (competence of testing and calibration laboratories)
- ISO 4037 (X and gamma reference radiations)
6 modules · 300 h
1.1Natural and artificial sources of radiation in the environment1.2Cosmic, terrestrial and radon radiation1.3Useful quantities: absorbed dose rate and ambient dose equivalent1.4Common units and orders of magnitude1.5Temporal and seasonal variability of background radiation1.6Influence of soil, climate and altitude1.7Objectives of an environmental monitoring programme1.8Difference between area monitoring and personal dosimetry1.9Stakeholders and use of results1.10Exercise: interpreting a background time series
2.1Thermoluminescent dosimeters and their reading2.2Optically stimulated luminescence dosimetry2.3Radiophotoluminescence dosimeters2.4Pressurised ionisation chambers for continuous measurement2.5Proportional and Geiger counters at fixed stations2.6In situ gamma spectrometry with germanium and sodium iodide2.7Passive radon and thoron detectors2.8Automatic stations and data telemetry2.9Criteria for selecting the detector according to the objective2.10Practical: comparing two techniques at the same point
3.1Defining the study area and receptors3.2Density and location of measurement points3.3Reference and background control points3.4Frequency of campaigns3.5Monitoring around nuclear and radioactive facilities3.6Early warning networks and alert thresholds3.7Integration of meteorological data3.8Chain of custody for passive dosimeters3.9Documentation of the network design3.10Practical: designing a network for a site
4.1Sampling air, soil, water and vegetation4.2Sample preparation and counting geometries4.3Laboratory gamma spectrometry4.4Determination of alpha and beta emitters4.5Basic radiochemical separation4.6Minimum detectable activity and detection limit4.7Reference materials and intercomparison tests4.8Laboratory accreditation and competence standard requirements4.9Sample registration and traceability4.10Practical: calculating activity from a spectrum
5.1Calibration and metrological traceability5.2Evaluation of measurement uncertainty5.3Correction for background, self-absorption and decay5.4Internal quality control and control charts5.5Handling values below the detection limit5.6Trend analysis and anomaly detection5.7Comparison with reference levels and historical background5.8Structure of the environmental monitoring report5.9Communicating results to the public and the authorities5.10Practical: drafting an annual monitoring report
6.1Selecting the site and objectives6.2Characterisation of the prior radiological background6.3Selection of techniques and instrumentation6.4Network design and campaign schedule6.5Sampling and analysis plan6.6Quality and uncertainty plan6.7Action criteria and thresholds6.8Budget and resources6.9Monitoring programme report6.10Project defence
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, making it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is QGIS, R (statistical analysis), Genie 2000, advanced Excel, Python (pandas), in free, academic or evaluation versions. Practical work is based on real procedures from thermoluminescent dosimeter networks, automatic dose rate stations and laboratory intercomparisons. Assessment is continuous, module by module, plus the final integrated project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the quantities and sources of environmental radiation.
Compare detectors and measurement techniques used in environmental dosimetry.
Design a monitoring network according to regulatory criteria.
Apply sampling and laboratory analysis procedures.
Calculate detection limits and standardised decision thresholds.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with QGIS, R (statistical analysis), Genie 2000, advanced Excel and Python (pandas). Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM diploma upon passing the continuous assessment and the integrated project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Please check the credit transfer policy when you enrol.
Related programmes
Course in VPP Analysis for Yachts
Online 300 h course in VPP analysis for yachts. 6 modules covering ORC Rating Systems, ORC International Measurement System (IMS) and ORC VPP. Assigned tutor and…
Curso de Normativas en infraestructura crítica nuclear
300-hour online course in Nuclear Critical Infrastructure Regulations. 4 modules with IAEA safety standards (IAEA SSR-2/1), WENRA Reference Levels and MCNP. Assigned tutor and open enrollment.
Course in Mobility Insurance in Smart Cities
300-hour online course in mobility insurance in smart cities. 6 modules covering Royal Legislative Decree 8/2004 (civil liability and motor vehicle insurance), Directive 2009/103/EC (motor vehicle…
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships