Sled Testing and Impact Dummies Course
Online 300-hour course in sled testing and impact dummies. 6 modules covering 49 CFR Part 572 (anthropomorphic dummies), SAE J211 (instrumentation for impact tests) and DIAdem. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe how sled test facilities operate.
Distinguish the types of anthropomorphic dummies and their applications.
Apply instrumentation and filtering requirements according to SAE J211.
Calculate injury criteria such as HIC, Nij and thoracic deflection.
Plan tests for belts, seats and child restraints.
Correlate sled results with multibody simulation.
Carry out a complete sled test project.
Who it's for
- Sled test engineer wishing to specialise in Sled Testing and Impact Dummies.
- Dummy and instrumentation technician wishing to specialise in Sled Testing and Impact Dummies.
- Restraint systems engineer wishing to specialise in Sled Testing and Impact Dummies.
- Impact biomechanics engineer wishing to specialise in Sled Testing and Impact Dummies.
- Seat engineer wishing to specialise in Sled Testing and Impact Dummies.
- Impact laboratory manager wishing to specialise in Sled Testing and Impact Dummies.
- Engineering or science graduates seeking to enter the automotive industry.
What you'll work with
- 49 CFR Part 572 (anthropomorphic dummies)
- SAE J211 (instrumentation for impact tests)
- UN Regulation R16 (safety belts)
- UN Regulation R17 (seats and head restraints)
- UN Regulation R129 (child restraint systems)
- FMVSS 213 (child restraint systems)
- ISO 6487 (measurement techniques in impact tests)
6 modules · 300 h
1.1Principle of the trolley test1.2Acceleration and deceleration sleds1.3Generation of the impact pulse1.4Hydraulic and braking systems1.5Vehicle body and seat mounting1.6Pulse repeatability1.7Advantages over full-vehicle testing1.8Child restraint testing on sled1.9ECE R16, R17 and R129 regulations1.10Practical case: reproduction of a vehicle pulse
2.1History of impact dummies2.2Hybrid III family2.3THOR-50M and its instrumentation2.4Side dummies: ES-2, WorldSID and SID-IIs2.5BioRID for rear impact2.6Q-series child dummies2.7Dummy certification and calibration2.8Biofidelity and reference responses2.9Female dummies and diversity2.10Practice: neck certification of a Hybrid III
3.1Accelerometers and load cells3.2Thoracic deflection sensors: IR-TRACC3.3Potentiometers and angular sensors3.4On-board data acquisition systems in the dummy3.5Sampling frequency and CFC filters3.6SAE J211 and ISO 64873.7High-speed cameras3.8Kinematic analysis by video3.9Measurement uncertainty3.10Laboratory: signal filtering according to SAE J211
4.1HIC15 and HIC364.2Neck criteria Nij and NIC4.3Thoracic deflection and viscous criterion4.4Femur and tibia criteria4.5Injuries in side impact4.6Injuries in rear impact4.7AIS injury risk4.8Limits in regulations and NCAP4.9New criteria for THOR4.10Workshop: calculating HIC from a signal
5.1Optimisation of belts and pretensioners5.2Seat and head restraint testing5.3Whiplash testing5.4Child seat testing5.5Aircraft seat testing5.6Rail and bus seats5.7Dummy simulation in LS-DYNA5.8THUMS and GHBMC human models5.9Correlation of sled and full-vehicle tests5.10Practical case: optimisation of a load limiter
6.1Definition of objective6.2Pulse selection6.3Dummy selection6.4Set-up configuration6.5Instrumentation plan6.6Preliminary simulation6.7Injury criteria analysis6.8Conclusions and improvements6.9Report and presentation6.10Final review with tutor
How you'll learn
{"100 % online"} training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, making it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is DIAdem, MADYMO, TEMA, LS-DYNA, in free, academic or evaluation versions. Tests are studied using real procedures for sled catapult acceleration, dummy calibration and high-speed video. Assessment is continuous per module plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe how sled test facilities operate.
Distinguish the types of anthropomorphic dummies and their applications.
Apply instrumentation and filtering requirements according to SAE J211.
Calculate injury criteria such as HIC, Nij and thoracic deflection.
Plan tests for belts, seats and child restraints.
Where this takes you
Requirements
- No prior degree required.
- Internet connection and a computer capable of running the programme's software.
- Spanish language level sufficient to follow technical standards reading.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with full-time work.
You work with DIAdem, MADYMO, TEMA, LS-DYNA. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official Ministry qualification.
Yes. Modules passed in a course or Postgraduate Diploma in the same area are credited towards the higher programme. Check the recognition policy when enrolling.
Related programmes
EU TSI and Railway Certification Course
Online 300-hour course in TSI and EU railway certification. 6 modules covering Directive (EU) 2016/797 (railway interoperability), Directive (EU) 2016/798 (railway safety) and the ERA One-Stop…
Autonomous Emergency Braking (AEB) Course
The Autonomous Emergency Braking (AEB) Course provides comprehensive training on AEB systems in vehicles. It explores how they work, the technology behind sensors such as radars…
Safety Case Integration in Autonomous Systems Course
Online course of 300 hours in safety case integration in autonomous systems. 6 modules covering autonomous safety cases, notations and argumentation, evidence sources, lifecycle integration, assessment…
More in Regulation, Safety, RAMS & Homologation
All Regulation, Safety, RAMS & Homologation programmes → · How to apply · Fees & financing · Scholarships