Postgraduate Diploma in PV+BESS+EV Design and Microgrid Control
Online 800-hour Postgraduate Diploma in PV+BESS+EV Design and Microgrid Control. 8 modules covering IEEE 2030.7, IEEE 2030.8 and PVsyst. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Design microgrid architectures that integrate photovoltaics, storage and charging.
Size photovoltaic systems using hourly simulation.
Size storage systems to meet safety requirements.
Integrate electric vehicle chargers with intelligent management.
Apply hierarchical and droop control strategies in microgrids.
Programme optimisation-based energy management systems.
Assess the technical and economic feasibility of a microgrid with charging.
Who it's for
- Microgrid engineer wishing to specialise in PV+BESS+EV Design and Microgrid Control.
- Photovoltaic and storage system designer wishing to specialise in PV+BESS+EV Design and Microgrid Control.
- Power systems control engineer wishing to specialise in PV+BESS+EV Design and Microgrid Control.
- Energy management specialist wishing to specialise in PV+BESS+EV Design and Microgrid Control.
- Renewable energy project manager wishing to specialise in PV+BESS+EV Design and Microgrid Control.
- Fleet electrification consultant wishing to specialise in PV+BESS+EV Design and Microgrid Control.
- Graduates in engineering or sciences seeking to enter the renewable energy sector.
What you'll work with
- IEEE 2030.7
- IEEE 2030.8
- IEEE 1547-2018
- IEC 62933-5-2
- UL 9540A
- NFPA 855
- IEC 61851-1
- Real Decreto 244/2019
8 modules · 800 h
1.1Definition and types of microgrids1.2AC, DC and hybrid microgrids1.3Grid-connected and islanded operation1.4Components: PV, BESS, chargers and loads1.5Operating modes and transition to islanded operation1.6Controller specification according to IEEE 2030.71.7Use cases in depots and hubs1.8Benefits and barriers to implementation1.9Communication and control architectures1.10Case study: analysis of an existing microgrid
2.1Solar resource and PVGIS database2.2Photovoltaic module technologies2.3String inverters versus central inverters2.4Solar canopies in car parks2.5System losses and performance ratio2.6Simulated hourly production2.7Self-consumption regulations in Spain2.8Protection and DC-side cabling2.9Maintenance of photovoltaic installations2.10Laboratory: production simulation in PVsyst
3.1LFP and NMC chemistries for stationary use3.2Energy and power sizing3.3Power conversion systems (PCS)3.4BMS and thermal management of the system3.5Safety according to UL 9540A and NFPA 8553.6Service life and expected degradation3.7Containers and associated civil works3.8Integration with DC coupling3.9Levelised cost of storage3.10Practice: BESS sizing for a depot
4.1AC and DC chargers in microgrids4.2Common DC bus for chargers4.3Fleet demand profiles4.4Intelligent charge management4.5Vehicle-to-grid within the microgrid4.6OCPP protocol compatibility4.7Vehicle prioritisation according to operation4.8Power quality in the microgrid4.9Protection specific to charging4.10Workshop: charger integration in a microgrid
5.1Hierarchical primary, secondary and tertiary control5.2Frequency and voltage droop control5.3Grid-forming and grid-following inverters5.4Synchronisation and transition to islanded operation5.5Frequency and voltage stability5.6Inverter control loops5.7Electrical protection in microgrids5.8Electromagnetic transient simulation5.9Validation using hardware-in-the-loop5.10Laboratory: droop control in Simulink
6.1Functions of an energy management system6.2Solar and demand forecasting6.3Optimisation using predictive control6.4Peak shaving and maximising self-consumption6.5Price arbitrage with storage6.6Daily BESS scheduling6.7Response to grid signals6.8Heuristic algorithms versus optimal ones6.9Microgrid performance indicators6.10Practice: EMS for a microgrid in Python
7.1Analysis of alternatives with HOMER Pro7.2Levelised cost of energy and NPV7.3Sensitivities and price scenarios7.4Subsidies and sources of funding7.5Procedures and necessary permits7.6EPC and operation contracts7.7Technical and economic project risks7.8Avoided carbon emissions7.9Structure of the feasibility report7.10Case study: microgrid for a bus depot
8.1Site requirements and demand8.2Photovoltaic system design8.3Storage sizing8.4Charger integration8.5Control strategy and EMS8.6Simulation and design validation8.7Protection scheme8.8Economic analysis of the project8.9Report and presentation8.10Final review with the tutor
How you'll learn
100% online training on the SEIUM Institute campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is PVsyst, HOMER Pro, MATLAB/Simulink, PLECS, Python, in free, academic or evaluation versions. Tests are studied using real design procedures for microgrids in electric bus depots, sizing of PV and BESS systems in charging hubs, and validation of controllers through simulation. Assessment is continuous per module plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Design microgrid architectures that integrate photovoltaics, storage and charging.
Size photovoltaic systems using hourly simulation.
Size storage systems to meet safety requirements.
Integrate electric vehicle chargers with intelligent management.
Apply hierarchical and droop control strategies in microgrids.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Spanish proficiency sufficient to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The programme uses PVsyst, HOMER Pro, MATLAB/Simulink, PLECS, Python. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM Institute diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the advanced programme. Please check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Continuous Modelling and Simulation
Online 800-hour postgraduate diploma in Continuous Modelling and Simulation. 8 modules with Modelica Language Specification 3.6, FMI 3.0 (Modelica Association) and MATLAB/Simulink. Assigned tutor and open…
Postgraduate Diploma in Impact Studies and Hosting Capacity
Online 800-hour Postgraduate Diploma in Impact Studies and Hosting Capacity. 8 modules covering EN 50160, IEC 60076-7 and OpenDSS. Assigned tutor and open enrolment.
Diploma in Aging, Odor and Durability of Surfaces
The Diploma in Aging, Odor, and Surface Durability explores methodologies for evaluating and predicting the behavior of surfaces exposed to environmental, chemical, and physical factors over…
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships