Postgraduate Diploma in Grid Codes and Compliance Testing
Online Postgraduate Diploma of 800 hours in Grid Codes and Compliance Testing. 8 modules covering Regulation (EU) 2016/631 (Requirements for Generators, RfG), Regulation (EU) 2016/1388 (Demand Connection Code, DCC) and DIgSILENT PowerFactory. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the framework of European network codes.
Apply technical requirements to generation modules.
Describe equipment certification processes.
Plan compliance field tests.
Validate simulation models with test results.
Analyse the requirements for demand, storage and HVDC.
Manage the connection procedure up to final notification.
Who it's for
- Network code engineer who wants to specialise in Grid Codes and Compliance Testing.
- Equipment certification engineer who wants to specialise in Grid Codes and Compliance Testing.
- Compliance testing engineer who wants to specialise in Grid Codes and Compliance Testing.
- Electrical modelling engineer who wants to specialise in Grid Codes and Compliance Testing.
- Grid connection manager who wants to specialise in Grid Codes and Compliance Testing.
- Renewable integration consultant who wants to specialise in Grid Codes and Compliance Testing.
- Engineering or science graduates looking to enter renewable developers.
What you'll work with
- Regulation (EU) 2016/631 (Requirements for Generators, RfG)
- Regulation (EU) 2016/1388 (Demand Connection Code, DCC)
- Regulation (EU) 2016/1447 (HVDC connection)
- Technical Supervision Standard NTS (Spain)
- EN 50549-10 (generation compliance testing)
- IEC 61400-21-1 (power quality of wind turbines)
- FGW TR 3 (electrical characteristics testing)
8 modules · 800 h
1.1EU network codes package1.2RfG Regulation 2016/631 for generators1.3DCC Regulation on demand connection1.4HVDC Regulation 2016/14471.5Classification of type A, B, C and D modules1.6National implementation and NTS in Spain1.7Non-exhaustive requirements and their specification1.8Ongoing review of network codes1.9Comparison with NERC and AEMO requirements1.10Case study: classification of a hybrid plant
2.1Frequency and voltage ranges2.2Limited frequency response LFSM-O and LFSM-U2.3Frequency sensitive mode FSM2.4Reactive power capability2.5Voltage, reactive power and power factor control2.6FRT fault ride-through capability2.7Fast fault current injection2.8Active power recovery after a fault2.9Protection and interconnection requirements2.10Practical: verification of an FRT curve
3.1Certification scheme for generating units3.2Technical Supervision Standard NTS3.3Accredited certification bodies3.4Equipment and module certificates3.5Validated simulation models3.6Laboratory type tests3.7Voltage dip testing with mobile equipment3.8IEC 61400-21 and IEC 62116 standards3.9Documentation for the operator3.10Workshop: review of a unit certificate
4.1Compliance test plan4.2Active power and ramp tests4.3Voltage control tests4.4Frequency response tests4.5Reactive power capability tests4.6Test instrumentation and recording4.7Acceptance criteria and tolerances4.8Management of non-conformities4.9Final test report4.10Laboratory: analysis of records from a frequency test
5.1Generic RMS models IEC 61400-275.2WECC models for renewables5.3Manufacturer EMT models5.4Model validation through testing5.5Simulation in PowerFactory and PSS/E5.6Simulation of the point of connection5.7Stability studies for connection5.8Aggregation of plant models5.9Confidentiality of manufacturer models5.10Practical: validation of a generic model
6.1DCC requirements for demand facilities6.2Storage and its fit within RfG6.3Demand response requirements6.4Requirements for HVDC links6.5DC-connected park modules6.6Electrolysers and large loads6.7Grid-forming in the code review6.8Requirements for EV chargers6.9Cybersecurity requirements6.10Case study: requirements applicable to a 100 MW storage facility
7.1Operational notification: EON, ION and FON7.2Phases of the commissioning procedure7.3Coordination with the system operator7.4Real-time data communication7.5Exceptions and derogations7.6Substantial modifications to installations7.7Management of non-compliance7.8Owner's responsibilities7.9Timelines and process risks7.10Workshop: compliance schedule for a solar park
8.1Definition of the installation and its type8.2Identification of applicable requirements8.3Analysis of equipment capabilities8.4Certification plan8.5Field test plan8.6Simulation studies8.7Document management with the operator8.8Risk and timeline plan8.9Report and presentation8.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is DIgSILENT PowerFactory, PSCAD, PSS/E, MATLAB/Simulink, in free, academic or evaluation versions. Tests are studied using real field test procedures for generating modules, model validation simulations and voltage dip tests. Assessment is continuous per module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the framework of European network codes.
Apply technical requirements to generation modules.
Describe equipment certification processes.
Plan compliance field tests.
Validate simulation models with test results.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards reading.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with full-time work.
You will work with DIgSILENT PowerFactory, PSCAD, PSS/E, MATLAB/Simulink. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An own diploma from SEIUM Institute upon passing the continuous assessment and the integrating project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher-level programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Active/Static Compensation and Power Quality
Online 800-hour Postgraduate Diploma in Active/Static Compensation and Power Quality. 8 modules covering IEEE 519-2022 (harmonic control), IEC 61000-3-6 (harmonic emission limits in MV and HV)…
Postgraduate Diploma in Electrical Architectures (UPS/STS) and Continuity
Online 800 h Postgraduate Diploma in Electrical Architectures (UPS/STS) and Continuity. 8 modules covering IEC 62040-3 (UPS system performance), IEC 62040-1 (UPS system safety) and ETAP.…
Postgraduate Diploma in SAS Architecture and IEC 61850 Process Bus
Online 800-hour Postgraduate Diploma in SAS Architecture and IEC 61850 Process Bus. 8 modules covering IEC 61850-6 (SCL configuration language), IEC 61850-8-1 (MMS and GOOSE messaging)…
More in Energy and Networks
All Energy and Networks programmes → · How to apply · Fees & financing · Scholarships