Postgraduate Diploma in Commissioning of STATCOM/SSSC/TCSC
Online 800-hour Postgraduate Diploma in Commissioning of STATCOM/SSSC/TCSC. 8 modules covering IEEE 1031 (specification of static var compensators), IEC 62927 (VSC valves for STATCOM) and PSCAD/EMTDC. Dedicated tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Compare the operating principle of STATCOM, SSSC and TCSC.
Carry out system studies to specify a FACTS device.
Identify the main components and their testing requirements.
Verify the control and protection functions of the equipment.
Plan factory acceptance tests.
Carry out the field commissioning sequence.
Define acceptance criteria and maintenance plans.
Who it's for
- FACTS commissioning engineer seeking to specialise in Commissioning of STATCOM/SSSC/TCSC.
- Reactive power compensation specialist seeking to specialise in Commissioning of STATCOM/SSSC/TCSC.
- FACTS control and protection engineer seeking to specialise in Commissioning of STATCOM/SSSC/TCSC.
- System studies engineer seeking to specialise in Commissioning of STATCOM/SSSC/TCSC.
- Field testing manager seeking to specialise in Commissioning of STATCOM/SSSC/TCSC.
- Power electronics maintenance engineer seeking to specialise in Commissioning of STATCOM/SSSC/TCSC.
- Engineering or science graduates looking to enter electricity transmission.
What you'll work with
- IEEE 1031 (specification of static var compensators)
- IEC 62927 (VSC valves for STATCOM)
- IEEE 1534 (specification of thyristor-controlled series capacitors)
- IEC 61954 (testing of thyristor valves for SVC)
- IEC 60143-1 (series capacitors for power systems)
- Regulation (EU) 2017/1485 (system operation guidelines)
- IEC 60270 (partial discharge measurement)
8 modules · 800 h
1.1Reactive power compensation in networks1.2Shunt and series FACTS1.3Operating principle of the STATCOM1.4Synchronous series compensator SSSC1.5Thyristor-controlled series capacitor TCSC1.6Comparison with SVC and fixed capacitors1.7VSC converters and MMC topology1.8Voltage stability and transfer capability1.9IEEE 1031 and IEC 62927 standards1.10Case study: selecting FACTS for a corridor
2.1Models for load flow2.2RMS dynamic models2.3EMT simulation in PSCAD and EMTP2.4Subsynchronous resonance with series compensation2.5Interaction with generator controls2.6Harmonics and filter design2.7Converter contribution to short-circuit current2.8Insulation coordination2.9Specification of performance requirements2.10Laboratory: EMT model of a STATCOM
3.1Thyristor and IGBT valves3.2Submodules and power capacitors3.3Reactors and coupling transformers3.4Deionised water cooling3.5Series capacitor banks and MOV varistors3.6Spark gap and bypass switch3.7Insulated platforms for series compensation3.8Auxiliary services and UPS3.9Protection and control cubicles3.10Workshop: review of single-line diagrams and layout
4.1Voltage and current control loops4.2Reactive power control modes4.3TCSC impedance control4.4POD oscillation damping4.5Internal converter protection4.6Series capacitor protection4.7Coordination with line protection4.8Fault behaviour and FRT4.9Event logging and oscillography4.10Practice: tuning controllers in simulation
5.1FAT test plan5.2Type and routine tests of valves5.3Transformer and reactor tests5.4Cooling system tests5.5Control testing in HIL loop5.6Validation with RTDS or OPAL-RT5.7Functional protection tests5.8Test protocols and documentation5.9Management of non-conformities5.10Case study: analysis of a FAT report
6.1Commissioning plan and sequence6.2Isolation and the five golden rules6.3Installation inspection and preliminary tests6.4Wiring and loop verification6.5Tests on de-energised subsystems6.6Energisation and no-load tests6.7Step tests and dynamic response6.8Staged fault tests6.9Grid interaction tests6.10Case study: energising a STATCOM
7.1Continuous operation tests7.2Verification of guarantees and performance7.3Acceptance criteria and certificate7.4Integration with SCADA and control centre7.5Operator training7.6Preventive and predictive maintenance7.7Availability and RAM analysis7.8Critical spares management7.9Lessons learned from incidents7.10Workshop: maintenance plan for a TCSC
8.1Description of the FACTS system under study8.2Technical and grid requirements8.3Preliminary studies and models8.4FAT and SAT test plan8.5Energisation procedures8.6Risk and safety analysis8.7Acceptance criteria and records8.8Handover to operation8.9Report and presentation8.10Final review with the tutor
How you'll learn
Fully 100% online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. No fixed timetable: learners progress at their own pace within the intake, which makes it compatible with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is PSCAD/EMTDC, RTDS (RSCAD), PSS/E, DIgSILENT PowerFactory, MATLAB, in free, academic or evaluation versions. Coursework studies real factory acceptance test procedures with a real-time simulator, field energisation and dynamic response tests, and verification of subsynchronous resonance. Assessment is continuous per module plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Compare the operating principle of STATCOM, SSSC and TCSC.
Carry out system studies to specify a FACTS device.
Identify the main components and their testing requirements.
Verify the control and protection functions of the equipment.
Plan factory acceptance tests.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The programme uses PSCAD/EMTDC, RTDS (RSCAD), PSS/E, DIgSILENT PowerFactory and MATLAB. Free, academic or evaluation versions are used, and the tutor indicates a free alternative where one exists.
A SEIUM own diploma upon passing continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the higher programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Compression, Storage and Distribution
Online Postgraduate Diploma of 800 h in compression, storage and distribution. 8 modules covering ISO 19880-1 (hydrogen refuelling stations), SAE J2601 (refuelling protocols) and Aspen HYSYS.…
Postgraduate Diploma in Secure Architectures and OT SOC
Online 800 h Postgraduate Diploma in Secure Architectures and OT SOC. 8 modules covering IEC 62443-3-3 (system security requirements for IACS), IEC 62443-2-1 (asset owner security…
Postgraduate Diploma in Project Finance and Financial Modelling
Online 800-hour Postgraduate Diploma in Project Finance and Financial Modelling. 8 modules covering the Equator Principles (EP4), IFC Performance Standards on sustainability and advanced Excel (VBA).…
More in Energy and Networks
All Energy and Networks programmes → · How to apply · Fees & financing · Scholarships