Postgraduate Diploma in Cold Plate and Dielectric Systems Design
800-hour online Postgraduate Diploma in Cold Plate and Dielectric Systems Design. 8 modules covering ISO 6469-1, IEC 60156 and ANSYS Fluent. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Apply heat transfer fundamentals to cold plate design.
Design channel geometries using thermal and hydraulic criteria.
Select manufacturing processes for cold plates.
Simulate cold plates using conjugate CFD.
Evaluate dielectric fluids for immersion cooling.
Compare single-phase and two-phase immersion.
Plan the validation of cooling systems.
Who it's for
- Thermal engineer who wants to specialise in Cold Plate and Dielectric Systems Design.
- CFD simulation engineer who wants to specialise in Cold Plate and Dielectric Systems Design.
- Mechanical design engineer who wants to specialise in Cold Plate and Dielectric Systems Design.
- Welding process engineer who wants to specialise in Cold Plate and Dielectric Systems Design.
- Validation engineer who wants to specialise in Cold Plate and Dielectric Systems Design.
- Product engineer who wants to specialise in Cold Plate and Dielectric Systems Design.
- Graduates in engineering or sciences seeking to enter electric mobility.
What you'll work with
- ISO 6469-1
- IEC 60156
- IEC 61099
- Reglamento UNECE n.º 100
- ASTM D877
- ISO 16232
- SAE J2380
8 modules · 800 h
1.1Conduction through aluminium plates1.2Forced convection in internal channels1.3Nusselt, Reynolds and Prandtl numbers1.4Dittus-Boelter and Gnielinski correlations1.5Cell-to-coolant thermal resistance network1.6Thermal interface materials and gap fillers1.7Pressure drop and friction factor1.8Laminar, transitional and turbulent regimes1.9Thermal effectiveness of the plate1.10Practical: thermal resistance of a cold plate
2.1Serpentine versus parallel channels2.2Microchannels and their hydraulic trade-off2.3Pin fins and internal turbulators2.4Inlet and outlet manifold design2.5Temperature uniformity between cells2.6Topology optimisation of channels2.73000 and 6000 series aluminium alloys2.8Wall thickness and working pressure2.9Design for manufacture2.10Workshop: serpentine channel for a 12-cell module
3.1Furnace brazing under controlled atmosphere3.2Friction stir welding (FSW)3.3Stamped and laser-welded plates3.4Multi-port extrusion profiles3.5Tubes embedded in the plate3.6Dimensional control and flatness3.7Helium leak testing3.8Internal cleaning and particle control3.9Unit cost in series production3.10Case study: choosing a process for 100 000 units
4.1CFD modelling of cooling channels4.21D network models for circuits4.3Parametric geometry studies4.4Flow rate sensitivity analysis4.5Meshing of microchannels and boundary layers4.6Post-processing of cell thermal maps4.7Correlation of simulation with hydraulic test bench4.8Model reduction for the system4.9Uncertainty in material properties4.10Practical: CFD of a plate with pin fins
5.1Requirements of a dielectric coolant5.2Mineral oils and polyalphaolefins5.3Synthetic and natural esters5.4Low-boiling-point fluorinated fluids5.5Dielectric strength and permittivity5.6Compatibility with seals and plastics5.7Viscosity and pumping power5.8Flash point and fire risk5.9Global warming potential of fluids5.10Laboratory: measuring the dielectric strength of an oil
6.1Principle of single-phase immersion6.2Boiling in two-phase immersion6.3Design of sealed housings for immersion6.4Flow distribution around cells6.5Benefits against thermal propagation6.6Sealing of electrical feedthroughs6.7Fluid ageing and filtration6.8Performance comparison with cold plates6.9Applications in competition and heavy vehicles6.10Case study: submerged pack concept
7.1Mounting the plate in the pack7.2Gap filler application in production7.3Thermal performance test on the bench7.4Burst pressure test7.5Durability under cyclic pressure7.6Internal corrosion of the glycol circuit7.7Electrical insulation between cells and plate7.8Detection and management of coolant leaks7.9Technical cleanliness to ISO 162327.10Case study: validation plan for a cold plate
8.1Thermal and hydraulic requirements8.2Chosen cooling concept8.3Detailed design of plate or immersion system8.4Simulation of thermal behaviour8.5Justification of the working fluid8.6Proposed manufacturing process8.7Scheduling of validation tests8.8System cost analysis8.9Report and presentation8.10Final review with the tutor
How you'll learn
Fully 100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, making it easy to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is ANSYS Fluent, Siemens Simcenter STAR-CCM+, SolidWorks Flow Simulation, Altair OptiStruct, GT-SUITE, in free, academic or evaluation versions. Tests are studied using real design procedures for cold plates for high-power packs, selection of dielectric fluids for immersion, and leak and pressure validation. Assessment is continuous, module by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Apply heat transfer fundamentals to cold plate design.
Design channel geometries using thermal and hydraulic criteria.
Select manufacturing processes for cold plates.
Simulate cold plates using conjugate CFD.
Evaluate dielectric fluids for immersion cooling.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours, spread over 6 to 8 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.
You will work with ANSYS Fluent, Siemens Simcenter STAR-CCM+, SolidWorks Flow Simulation, Altair OptiStruct, GT-SUITE. Free, academic or evaluation versions are used, and the tutor indicates the open-source alternative where one exists.
An SEIUM diploma awarded upon passing the continuous assessment and the integrating project. It is institutional training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the advanced programme. Check the recognition policy when enrolling.
Related programmes
Postgraduate Diploma in Digital Twins of Battery Packs and Failure Prediction
Online 800-hour Postgraduate Diploma in Pack Digital Twins and Failure Prediction. 8 modules with ISO 23247, ISO 26262 and MATLAB/Simulink. Assigned tutor and open enrolment.
Postgraduate Diploma in Environmental Testing and Electrical Safety
Online 800-hour Postgraduate Diploma in Environmental Testing and Electrical Safety. 8 modules covering IEC 60068-2-1, IEC 60529 and LabVIEW. Assigned tutor and open enrolment.
Postgraduate Diploma in FC Systems Control and Functional Safety
Online Postgraduate Diploma of 800 h in FC Systems Control and Functional Safety. 8 modules covering ISO 26262, IEC 61508 and MATLAB/Simulink. Assigned tutor and open…
More in Electromobility, Batteries & Hydrogen
All Electromobility, Batteries & Hydrogen programmes → · How to apply · Fees & financing · Scholarships