Lighting and Energy Course in Urban Tunnels
About our
The Urban Tunnel Lighting and Energy Course explores the design and optimization of LED lighting systems and energy management for tunnels, integrating principles of energy efficiency and road safety. It focuses on the study of photometric curves, illumination levels, intelligent control, and lighting simulations, considering factors such as tunnel effect and nighttime visibility. The course addresses the implementation of sensor networks, SCADA systems, and the use of renewable energy sources to power tunnels, including traffic flow management and carbon footprint reduction. The course provides tools for energy saving analysis, lighting quality assessment, and the application of international standards such as CIE and UNE-EN. The training prepares professionals for roles such as lighting engineers, energy managers, and maintenance technicians, enabling them to optimize efficiency and safety in urban road infrastructure.
Lighting and Energy Course in Urban Tunnels
- Format: Online
- Duration: 3 months
- Hours: 300 H
- Language: English / Spanish
- Registration date: 23-10-2026
- Start date: 12-12-2026
- Available places: 3
249 $
Competencies and results
What you will learn
1. Comprehensive Management of Lighting and Energy in Urban Tunnels: Design, Operation and Efficiency.
- Fundamentals of Tunnel Lighting: Understand the principles of lighting technology, including photometry, colorimetry, and visual perception.
- Design of Efficient Lighting Systems: Learn to calculate and design optimized lighting systems for tunnels, considering road safety, visibility, and visual comfort.
- Lighting Technologies: Explore the different lighting technologies available, including LED, high-pressure sodium, and halogen, and evaluate their advantages and disadvantages in tunnel environments.
- Light Distribution and Control: Study light distribution techniques to minimize glare, optimize uniformity, and improve visibility in challenging driving conditions.
- Energy Management in Tunnels: Analyze energy consumption in lighting systems and develop strategies for reducing energy consumption, including the use of sensors, intelligent control systems, and energy-efficient technologies.
- Electrical System Design for Tunnels: Understand the key aspects of electrical system design for tunnels, including equipment selection, surge and short-circuit protection, and electrical safety.
- Operation and Maintenance of Lighting and Power Systems: Learn how to commission, operate, and maintain lighting and power systems in tunnels, including troubleshooting.
- Regulations and Standards: Become familiar with the relevant regulations and standards for the design, installation, and maintenance of lighting and power systems in tunnels, both nationally and internationally.
- Environmental Impact and Sustainability: Evaluate the environmental impact of lighting and power systems in tunnels and explore sustainable solutions, such as the use of renewable energy and reducing the carbon footprint.
- Case Studies and Practical Exercises: Analyze real-world cases of the design, implementation, and operation of lighting and power systems in tunnels to apply the acquired knowledge to real-world situations.
of the real world.
2. Energy Optimization and Advanced Lighting in Urban Tunnels: A Comprehensive Course.
- Understand the fundamental principles of energy optimization in urban tunnels.
- Analyze the specific energy needs of tunnels and their components.
- Evaluate different lighting systems, including LEDs and their associated technologies.
- Design strategies for efficient lighting, considering safety and visual comfort.
- Implement control and automation systems for lighting energy management.
- Apply simulation techniques to predict the energy performance of systems.
- Evaluate the environmental impact of lighting and energy use in tunnels.
- Study the relevant regulations and standards for energy efficiency and lighting in tunnels.
- Conduct case studies on energy and lighting optimization projects in urban tunnels.
- Learn about the latest trends and emerging technologies in the field.
3. Comprehensive user-oriented design and validation (from modeling to manufacturing)
You will learn to integrate the entire product development process, from initial model conception to final validation, applying user-centered methodologies. You will develop skills in parametric design, ergonomics, simulation, sustainable materials, 3D visualization, and manufacturing management, ensuring efficient, safe solutions that meet current industry standards.
4. Expert Implementation of Lighting and Energy Systems in Urban Tunnels: Design, Optimization and Maintenance.
4. Expert Implementation of Lighting and Energy Systems in Urban Tunnels: Design, Optimization, and Maintenance.
- Fundamental principles of tunnel lighting: understanding international standards and regulations (CIE, IES), photometry, luminance, and glare.
- Design of efficient lighting systems: luminaire selection (LED, sodium, etc.), calculation of optimal lighting levels, design of light distribution, simulation, and modeling.
- Design of robust and reliable power systems: energy demand analysis, substation selection, wiring and circuit protection, backup systems, and UPS.
- Optimization of energy consumption: energy-saving techniques, intelligent lighting control, energy management, and consumption monitoring.
- Implementation of control and automation systems: SCADA systems for remote control and monitoring, PLC programming, and lighting and power automation.
- Preventive and corrective maintenance: maintenance planning, regular inspections, and testing.
Performance, fault repair, and spare parts management.
Tunnel safety: emergency lighting systems, signage, electrical risk management, and compliance with safety regulations.
Implementation of advanced technologies: adaptive lighting systems, traffic detection sensors, and data-driven optimization.
Legal and regulatory aspects: compliance with local regulations, permits, and licenses.
Case studies: analysis of real-world projects, innovative solutions, and best practices in the design and maintenance of lighting and power systems in tunnels.
5. Lighting and Energy in Urban Tunnels: Fundamentals, Design and Integrated Management.
5. Lighting and Energy in Urban Tunnels: Fundamentals, Design, and Integrated Management.
- Understand the fundamental principles of lighting in urban tunnels, including photometry, luminance, and contrast.
- Study different lighting technologies, such as LED lamps, high-pressure sodium, and other sources, evaluating their advantages and disadvantages.
- Learn about the design of lighting systems, including light distribution, uniformity, and glare reduction.
- Analyze the energy aspects of tunnel lighting, including energy efficiency, consumption, and energy savings.
- Explore integrated lighting management systems, including automatic control, regulation, and monitoring.
- Know the regulations and standards related to lighting in urban tunnels, such as EN 13201 and other local regulations.
- Study the power systems used in tunnels, including electrical distribution, backup systems, and power sources.
- Analyze the safety of lighting and power systems, including fire protection, electrical safety measures, and emergency systems.
- Learn about the management of lighting and power projects in tunnels, including planning, budgeting, and execution.
- Develop skills for the inspection, maintenance, and evaluation of lighting and power systems in urban tunnels.
renewable.
6. Design, Operation and Maintenance of Lighting and Energy Systems in Urban Tunnels.
- Fundamentals of Tunnel Lighting:
- Basic principles of lighting: luminous flux, intensity, luminance, and efficiency.
- International standards and regulations for tunnel lighting (CIE, IES).
- Types of light sources: LED, high-pressure sodium (HPS), metal halide.
- Selection of luminaires and their distribution to ensure road safety and visibility.
- Lighting System Design:
- Lighting design and simulation software: DIALux, Relux.
- Lighting calculations: illumination levels, uniformity, glare.
- Design of lighting for the tunnel entrance, interior, and exit, including transition zones.
- Design optimization for efficiency Energy efficiency and reduced operating costs.
- Energy Systems in Tunnels:
- Types of energy systems: electrical grid, backup generators (diesel).
- Design of the electrical distribution network: wiring, transformers, electrical panels.
- Calculation of loads and sizing of electrical components.
- Protection systems: circuit breakers, fuses, lightning arresters.
- Operation and Control of Systems:
- Lighting control systems: regulation, dimming, ambient light sensors.
- Energy management systems: monitoring, consumption control, optimization.
- Automation and remote control of lighting and energy systems.
- Communication protocols: Modbus, Ethernet.
- Lighting System Maintenance:
- Preventive and corrective maintenance plans.
- Inspection and evaluation of luminaires and electrical components.
- Replacement of defective lamps and components.
- Cleaning and maintenance of luminaires and reflective surfaces.
- Power System Maintenance:
- Maintenance of transformers, electrical panels, and generators.
- Insulation testing and grounding verification.
- Maintenance of cables and connections.
- Electrical safety management and regulatory compliance.
Who this program is for:
Lighting and Energy Course in Urban Tunnels
- Engineers with experience in lighting and electrical systems, including electrical engineers, lighting engineers, and professionals with experience in the design and maintenance of urban infrastructure.
- Professionals in the construction and public works sector, such as architects, civil engineers, and road, canal, and port engineers, involved in urban tunnel projects.
- Technicians and managers responsible for maintenance of urban tunnels, including staff from concessionary companies, infrastructure managers, and municipal staff.
- Consultants and advisors specializing in energy efficiency and sustainability who wish to expand their knowledge of lighting and energy in tunnels.
- Students and recent graduates of related fields who wish to specialize in the design, implementation, and management of lighting and energy systems in urban tunnels.
- Standards-driven curriculum: you will work with CS-27/CS-29, DO-160, DO-178C/DO-254, ARP4754A/ARP4761, ADS-33E-PRF from the first module.
- Accreditable laboratories (EN ISO/IEC 17025) with rotor bench, EMC/Lightning pre-compliance, HIL/SIL, vibrations/acoustics.
- Evidence-oriented TFM: safety case, test plan, compliance dossierand operational limits.
- Mentored by industry: teachers with experience in rotorcraft, tiltrotor, eVTOL/UAM and flight test.
- Flexible modality (hybrid/online), international cohorts and support from SEIUM Career Services.
- Ethics and security: safety-by-design approach, cyber-OT, DIH and compliance as pillars.
1.1 Principles of Tunnel Lighting: Requirements and Regulations
1.2 Geometric Design and Visibility Analysis
1.3 Light Sources: Types, Characteristics, and Selection
1.4 Lighting Calculation: Methods and Software
1.5 Lighting System Design: Distribution and Control
1.6 Road Safety and Visual Comfort Considerations
1.7 Lighting Design at the Tunnel Entrance
1.8 Lighting Design Inside the Tunnel
1.9 Lighting Design at the Tunnel Exit
1.10 Case Studies: Practical Examples of Lighting Design
2.2 Introduction to Tunnel Lighting: Importance and Context
2.2 Applicable International and National Standards
2.3 Key Design Parameters: Luminance, Uniformity, and Glare
2.4 Lighting Systems: Types and Technologies
2.5 Lighting Evaluation: Measurements and Methods
2.6 Factors Affecting Visibility in Tunnels
2.7 Road Safety and Visual Comfort
2.8 Energy Efficiency in Lighting Systems
2.9 Conceptual Design and Initial Considerations
2.20 Application Examples and Case Studies
5.3 Fundamentals of Electrical Design in Urban Tunnels
5.2 Selection and Design of Efficient Luminaires
5.3 Lighting Calculation and Distribution
5.4 Control and Automation Systems
5.5 Energy Efficiency and Cost Reduction
5.6 Energy Demand Management
5.7 Implementation of Renewable Energies
5.8 Design of Backup and Emergency Power Systems
5.9 Design Standards and Regulations
5.30 Analysis of Practical Cases and Case Studies
4.4 Fundamentals of Urban Tunnel Lighting: Regulations and Standards
4.2 Conceptual Design of Lighting Systems: Illumination Levels and Uniformity
4.3 Selection of Luminaires and Light Sources: LED Technologies and Energy Efficiency
4.4 Lighting Calculation and Simulation: Software and Design Tools
4.5 Electrical Installation Design: Wiring, Protection, and Safety
4.6 Control and Automation of Lighting Systems: Sensors and Management Systems
4.7 Implementation and Assembly: Techniques and Best Practices
4.8 Commissioning and Testing: Performance Verification and Compliance with Requirements
4.9 Lighting Supervision and Management: Monitoring and Maintenance
4.40 Safety in Lighting Installations: Risks and Preventive Measures
5.5 Fundamentals of Lighting: Key Principles and Concepts
5.5 Physics of Light: Spectrum, Luminous Flux, and Illuminance
5.3 Systems of Units and Measurements in Lighting
5.4 Introduction to Energy: Types and Transformations
5.5 Energy Efficiency: Concepts and Measurements
5.6 Lighting Technologies: Traditional and LED
5.7 Lighting Design: Factors and Considerations
5.8 Lighting Standards and Regulations
5.9 Introduction to Tunnels: Types and Characteristics
5.50 Light-Environment Interaction in Tunnels
6.6 Fundamentals of Lighting and Energy Design in Urban Tunnels
6.2 Selection and Design of Lighting Systems
6.3 Design of Energy and Distribution Systems
6.4 Operation and Monitoring of Lighting Systems
6.5 Operation and Monitoring of Energy Systems
6.6 Preventive and Corrective Maintenance of Lighting Systems
6.7 Preventive and Corrective Maintenance of Energy Systems
6.8 Energy Efficiency Management in Tunnels
6.9 Failure Evaluation and Troubleshooting
6.60 Applicable Regulations and Standards
- Hands-on methodology: test-before-you-trust, design reviews, failure analysis, compliance evidence.
- Software (depending on licenses/partners): MATLAB/Simulink, Python (NumPy/SciPy), OpenVSP, SU2/OpenFOAM, Nastran/Abaqus, AMESim/Modelica, acoustics tools, planning toolchains DO-178C.
- SEIUM Laboratories: scale rotor bench, vibrations/acoustics, EMC/Lightning pre-compliance, HIL/SIL for AFCS, data acquisition with strain gauging.
- Standards and compliance: EN 9100, 17025, ISO 27001, GDPR.
Capstone-type projects
Admissions, fees, and scholarships
- Profile: Background in Computer Engineering, Mathematics, Statistics, or related fields; practical experience in NLP and valued information retrieval systems.
- Documentation: Updated CV, academic transcript, SOP/statement of purpose, project examples or code (optional).
- Process: Application → Technical evaluation of profile and experience → Technical interview → Review of case studies → Final decision → Enrollment.
- Fees:
- Single payment: 10% discount.
- Payment in 3 installments: No fees; 30% upon registration + 2 equal monthly payments of the remaining 35%.
Monthly payment: available with a 7% commission on the total; annual review.
Scholarships: based on academic merit, financial need, and promoting inclusion; agreements with companies in the sector for partial or full scholarships.
See “Calendar & Calls for Applications,” “Scholarships & Grants,” and “Fees & Financing” in the SEIUM mega-menu.
Do you have any questions?
Our team is ready to help you. Contact us, and we will respond as soon as possible.
F. A. Q
Frequently asked questions
Yes, we have international certification
Yes: experimental models, real data, applied simulations, professional environments, real case studies.
It is not mandatory. We offer leveling tracks and tutoring.
Completely. It covers e-propulsion, integration, and emerging regulations (SC-VTOL).
Recommended. There are also internal challenges and consortiums.
Yes. Online/hybrid modality with planned labs and visa support (see “Visa & Residence”).