EV Power Electronics Testing Course
About our
Power Electronics Testing Course in EVs
This course provides comprehensive training in the validation and verification techniques for power electronics systems used in electric vehicles (EVs). It focuses on the application of advanced testing methodologies to evaluate the efficiency, reliability, and safety of critical components such as inverters, on-board chargers, and battery management systems (BMS). The course covers the use of test benches and simulation tools to reproduce real-world operating conditions, including the analysis of PWM signals, thermal behavior, and fault protection.
The course offers hands-on experience in operating measurement and analysis equipment, enabling participants to develop skills in fault detection, performance analysis, and design optimization. Topics such as safety regulations and automotive industry standards are covered, preparing professionals for roles in test engineering, hardware development, and EV system validation.
EV Power Electronics Testing Course
- Format: Hybrid
- Duration: 3 months
- Hours: 300 H
- Language: English / Spanish
- Registration date: 23-10-2026
- Start date: 12-12-2026
- Available places: 3
799 $
Competencies and results
What you will learn
1. Advanced Diagnostics and Functional Verification in Power Electronics Systems for Electric Vehicles
- Understand the fundamental principles of power electronics applied to electric vehicles.
- Master advanced diagnostic techniques to identify faults in power electronics systems.
- Analyze and evaluate different power converter topologies used in electric vehicles.
- Interpret schematic diagrams and datasheets of power electronic components.
- Use simulation tools to model and analyze the behavior of power electronics systems.
- Apply functional verification methods to ensure the correct operation of systems.
- Identify and troubleshoot common problems in electric vehicle power electronics systems.
- Perform tests and measurements using specialized diagnostic equipment.
- Know the relevant regulations and standards for power electronics in electric vehicles.
- Optimize the performance and efficiency of power electronics systems.
2. In-depth Analysis of Power Electronics in Electric Vehicles: Design, Testing and Validation
- Understand the fundamentals of power electronics and its application in electric vehicles (EVs).
- Analyze the key components of power electronics in EVs: DC-DC converters, inverters, chargers, etc.
- Design power electronics circuits for EVs, considering efficiency, size, weight, and cost.
- Simulate and model power electronics circuits using specialized software.
- Perform tests and measurements on power electronics prototypes for EVs.
- Validate the performance and reliability of power electronics systems in EVs.
- Study energy control and management technologies in EVs.
- Explore current and future trends in power electronics for EVs.
- Address the integration of power electronics with other vehicle systems.
- Analyze the challenges and the Solutions related to safety and regulations in power electronics for EVs.
3. Comprehensive user-oriented design and validation (from modeling to manufacturing)
You will learn to integrate the entire product development process, from initial model conception to final validation, applying user-centered methodologies. You will develop skills in parametric design, ergonomics, simulation, sustainable materials, 3D visualization, and manufacturing management, ensuring efficient, safe solutions that meet current industry standards.
4. Expert Domain in Power Electronics Testing: Application in Electric Vehicles
4. Expert Mastery in Power Electronics Testing: Application in Electric Vehicles
- Power Electronics Fundamentals: You will understand the basic principles governing the operation of key components in electric vehicles, such as AC/DC, DC/DC, and DC/AC converters.
- Power Electronics Architectures in EVs: You will study the different architectures and configurations of power systems used in electric vehicles, including charging systems, inverters, and converters.
- Component Selection and Characterization: You will learn to select and characterize power electronics components, such as power semiconductors (MOSFETs, IGBTs), capacitors, inductors, and transformers.
- Circuit Design and Simulation: You will develop skills to design and simulate power electronics circuits using specialized software, enabling you to optimize system performance and efficiency.
- Testing and Measurement Techniques: You will acquire knowledge about Testing and measurement techniques used to evaluate the performance and reliability of power electronics systems, including switching, efficiency, and stability testing.
Fault Analysis and Diagnostics: You will be trained in fault analysis and problem diagnosis in power electronics systems, using advanced diagnostic tools and analysis techniques.
Applications in Electric Vehicles: You will explore the specific applications of power electronics in electric vehicles, including battery management systems, electric motor control, and charging systems.
Regulations and Standards: You will become familiar with the regulations and standards relevant to power electronics in electric vehicles, ensuring compliance with safety and performance requirements.
Systems Integration and Design: You will gain knowledge about the integration of power electronics systems in electric vehicles, including thermal management, surge protection, and electromagnetic compatibility (EMC).
Case Studies and Cases: You will participate in practical exercises and case studies that will allow you to apply the knowledge acquired in real-world scenarios, developing solutions for specific problems in the electric vehicle industry.
5. Implementation and Analysis of Specialized Power Electronics Tests for EVs
5. Implementation and Analysis of Specialized Power Electronics Tests for EVs
Design and simulation of power electronics circuits for electric vehicles (EVs).
Analysis of the topology and operation of DC-DC, DC-AC, and AC-DC converters used in EVs.
Implementation of characterization tests for power electronic components (IGBTs, MOSFETs, diodes).
Failure analysis and diagnostics in EV power electronics systems.
Implementation of stress and robustness tests on power converters.
Analysis of energy efficiency and optimization in EV power electronics systems.
Evaluation and analysis of EMI/EMC tests in power electronics systems.
Implementation of life cycle and reliability tests for power components.
Use of Simulation tools (e.g., PSIM, Simulink, PLECS) for systems design and analysis.
Interpretation of results and generation of technical reports for specialized tests.
6. Performance Testing and Circuit Validation in Power Electronics Systems for EVs
- Master the methodologies for evaluating the performance of power electronic circuits.
- Understand and apply simulation techniques for circuit validation in EV (Electric Vehicle) environments.
- Analyze and evaluate the operating characteristics of key components in power electronics systems for EVs (such as converters, inverters, etc.).
- Interpret and analyze performance test data, identifying potential faults or inefficiencies.
- Use specialized measuring tools and equipment for evaluating power electronics circuits.
- Apply validation techniques to ensure compliance with relevant specifications and regulations for EV systems.
- Diagnosticate problems and faults in power electronic circuits, proposing solutions.
- Know and apply electrical safety standards and regulations in the context of power electronics for EVs.
- Explore the impact of Environmental variables (temperature, humidity, etc.) affect circuit performance.
Develop skills in documenting and reporting performance and validation test results.
Who this program is for:
EV Power Electronics Testing Course
- Engineers with degrees in Aerospace Engineering, Mechanical Engineering, Industrial Engineering, Automation Engineering, or related fields.
- Professionals working in aircraft manufacturers (OEMs), specifically in the area of electric vertical takeoff and landing vehicles (eVTOLs) or rotorcraft, as well as personnel from Maintenance, Repair, and Operations (MRO), consulting, and technology centers.
- Experts in areas such as Flight Testing, certification, avionics, control, and flight dynamics who wish to deepen their knowledge and Specialize in power electronics testing.
Regulators, aviation authorities, and professionals involved in the development and regulation of Urban Air Mobility (UAM) and eVTOL, who need to acquire skills in regulatory compliance and safety.
Recommended Requirements: A basic understanding of aerodynamics, systems control, and structures is suggested. A B2+ or C1 level of Spanish/English is required. If necessary, we offer bridging tracks to help students reach the required level.
- Standards-driven curriculum: you will work with CS-27/CS-29, DO-160, DO-178C/DO-254, ARP4754A/ARP4761, ADS-33E-PRF from the first module.
- Accreditable laboratories (EN ISO/IEC 17025) with rotor bench, EMC/Lightning pre-compliance, HIL/SIL, vibrations/acoustics.
- Evidence-oriented TFM: safety case, test plan, compliance dossierand operational limits.
- Mentored by industry: teachers with experience in rotorcraft, tiltrotor, eVTOL/UAM and flight test.
- Flexible modality (hybrid/online), international cohorts and support from SEIUM Career Services.
- Ethics and security: safety-by-design approach, cyber-OT, DIH and compliance as pillars.
Module 1 — Advanced Diagnostics in EV Power Electronics
1.1 Fundamentals of Power Electronics in Electric Vehicles: Architecture and Key Components
1.2 Signals and Measurements in Power Electronics Systems: Waveform Analysis
1.3 Advanced Diagnostic Tools: Oscilloscopes, Multimeters, and Circuit Analyzers
1.4 Troubleshooting Techniques for DC-DC and DC-AC Converters
1.5 Identifying and Analyzing Problems in Electric Vehicle Inverters
1.6 Troubleshooting and Locating Faults in Electric Motor Control Systems
1.7 Troubleshooting Batteries and Battery Management Systems (BMS)
1.8 Functional Testing and Verification of Protection Systems in Power Electronics
1.9 Interpreting OBD-II Error Codes and Diagnostic Data
1.10 Practical Cases: Advanced Diagnostics in EV Power Electronics Systems
2. Advanced Power Electronics Diagnostics in EVs: Fundamentals and Methodologies
2. Advanced Tools and Techniques for Power Electronics System Diagnostics
3. Data Interpretation: Analysis of Common Faults in EV Power Electronics
4. Functional Verification: Tests and Protocols for Power Electronics Systems
5. Simulation and Modeling for Power Circuit Diagnostics in EVs
6. Predictive Maintenance Strategies in Power Electronics Systems
7. Case Studies: Troubleshooting and Diagnosis in EV Power Electronics
8. Future Trends in Power Electronics Diagnostics for Electric Vehicles
2. Fundamental Principles of Power Electronics in Electric Vehicles
3. Power Electronics Circuit Design: Topologies and Applications
4. Simulation and Modeling of Power Electronics Circuits
5. Design and Validation Testing: Results Analysis and Optimization
6. Thermal Management System Design in Electric Vehicle Power Electronics Power
7. Selection and Evaluation of Power Electronics Components
8. Regulations and Standards for Power Electronics in Electric Vehicles
9. Case Studies: Design and Validation of Power Electronics Systems
3. Analysis of Power Electronics Components: Types and Characteristics
4. Component Performance Evaluation: Efficiency and Losses
5. Component Optimization: Advanced Strategies and Techniques
6. Component Selection: Design Criteria and Considerations
7. Reliability and Durability Analysis of Components
8. Thermal Management in Power Electronics Components
9. Environmental Impact and Sustainability of Components
20. Practical Cases: Component Optimization in Power Electronics Systems
4. Introduction to Power Electronics Testing in Electric Vehicles
5. Instrumentation and Testing Equipment: Selection and Use
6. Functional Testing and Characterization of Component(s)
7. Power Circuit Testing: Strategies and Protocols
8. System Failure Analysis Power Electronics
9. Safety Testing: Regulatory Compliance
20. EMC/EMI Testing: Design and Mitigation
22. Case Studies: Testing Power Electronics Systems in EVs
5. Types of Specialized Tests in Power Electronics for EVs
6. Load and Performance Testing in Power Electronics Systems
7. Environmental Tolerance Testing: Temperature, Humidity, and Vibration
8. Component Life and Durability Testing
9. Failure Analysis and Diagnosis through Specialized Testing
20. Implementation of Electrical Safety Testing
22. Practical Cases: Design and Execution of Specialized Tests
22. Interpretation of Results and Decision Making
6. Fundamentals of Performance Testing in Power Electronics Circuits
7. Efficiency and Loss Testing in Power Electronics Systems
8. Switching and Dynamic Testing Circuits
9. Waveform and Signal Analysis in Power Circuits
20. Circuit Validation: Methodologies and Tools
22. Compliance with Regulations and Standards in Performance Testing
22. Practical Cases: Performance Testing in Different Topologies
7. Testing Techniques in Power Electronics: Advanced Methodologies
8. Fault Diagnosis: Problem Identification and Location
9. Calibration of Power Electronics Systems: Procedures and Tools
20. Performance Optimization through Calibration
22. Calibration Management: Traceability and Documentation
22. Case Studies: Testing, Diagnosis, and Calibration in Different Systems
23. Best Practices in Testing, Diagnosis, and Calibration
8. Stress Testing of Power Electronics Components
9. Overload and Transient Testing
20. Insulation and Electrical Safety Testing
22. Electromagnetic Compatibility (EMC) Testing
22. Test Implementation and Results Analysis
23. Case Studies: Application of Specialized EV Tests
24. Interpretation of Results and Corrective Actions
3.3 Selection and Evaluation of Key Components: IGBTs, MOSFETs, Diodes, and Capacitors
3.2 Failure and Degradation Analysis in Power Components
3.3 Characterization of Semiconductor Devices: Parameters and Modeling
3.4 Optimization of Component Selection for Different EV Applications
3.5 Design and Simulation of Protection Circuits for Components
3.6 Evaluation of Energy Performance and Component Efficiency
3.7 Cooling and Thermal Management Techniques for Power Components
3.8 Life Cycle and Durability Testing of Component(s)
3.9 Cost and Sustainability Analysis of Component(s)
3.30 Case Studies: Selection and Optimization of Component(s) in Specific EV Systems
4.4 Fundamentals of Power Electronics Testing for EVs
4.2 Instrumentation and Testing Equipment for EVs
4.3 Static and Dynamic Testing in Power Systems
4.4 Testing Key Components: MOSFETs, IGBTs, Diodes
4.5 Fault Analysis and Diagnostics in Power Systems
4.6 Testing DC-DC and DC-AC Converters
4.7 Validation of Control Systems in EVs
4.8 Simulation and Modeling for Power Electronics Testing
4.9 Testing Standards and Regulations in the EV Industry
4.40 Test Integration: Design and Execution of Test Plans
5. Power Electronics Diagnostics for EVs
5.5 Power System Architecture in Electric Vehicles
5.5 Advanced Diagnostic Methods: Software and Hardware
5.3 Fault Analysis in Inverters and Converters
5.4 Function Verification: Tests and Results
5.5 Specialized Tools and Equipment
5.6 Data Interpretation and Troubleshooting
5.7 Bench Testing: Simulated Conditions
5.8 Waveform Measurement and Analysis
5. Power Electronics Design and Validation for EVs
5.5 Power Electronics Circuit Design
5.5 Component Selection and Sizing
5.3 Power System Simulation
5.4 Prototype Validation: Testing and Evaluation
5.5 Electromagnetic Compatibility (EMC)
5.6 Safety and Regulatory Testing
5.7 Thermal Analysis and Dissipation Management
5.8 Test and Validation Cycles
3. EV Component Evaluation
3.5 Selection of Key Components: Criteria
3.5 Evaluation of Semiconductors Power
3.3 Capacitor and Inductor Analysis
3.4 Stress and Life Testing
3.5 Quality and Performance Factors
3.6 Supplier and Technology Comparison
3.7 Cost and Availability Analysis
3.8 Supplier and Supply Chain Evaluation
4. Advanced Electronics Testing
4.5 Non-Invasive Testing Techniques
4.5 System Functional Testing
4.3 Subsystem and Component Testing
4.4 Transient and Signal Analysis
4.5 Complex Fault Diagnosis
4.6 Use of Oscilloscopes and Analyzers
4.7 Stress Testing and Fault Simulation
4.8 Interpretation of Results and Reports
5. Specialized Power Electronics Testing
5.5 High Voltage and Insulation Testing
5.5 Vibration and Resistance Analysis
5.3 Thermal and Environmental Cycling Testing
5.4 Failure Mode and Effects Analysis (FMEA)
5.5 Short Circuit and Protection Testing
5.6 Analysis of Power Quality
5.7 Variable Load Performance Testing
5.8 Fault Simulation and Safety Analysis
6. Power Circuit Validation
6.5 Performance and Efficiency Testing
6.5 Thermal Management Validation
6.3 Electromagnetic Compatibility Testing
6.4 Protection and Safety Verification
6.5 Reliability and Durability Analysis
6.6 System Integration and Testing
6.7 Calibration and Control Validation
6.8 Documentation and Results Reporting
7. EV Diagnostics and Calibration
7.5 Advanced Diagnostic Techniques
7.5 Fault Identification and Location
7.3 Sensor and Actuator Calibration
7.4 Parameter Tuning and Optimization
7.5 Diagnostic and Programming Tools
7.6 Data and Trend Analysis
7.7 Real-Time Troubleshooting
7.8 Preventive and Corrective Maintenance
8. Power Electronics Testing
8.5 Component Characterization Testing
8.5 Functional Testing and performance
8.3 Stress and reliability testing
8.4 Data and results analysis
8.5 Advanced instrumentation and measurement
8.6 Software applications and simulations
8.7 Signal and data interpretation
8.8 Test and results documentation
6.6 Fundamentals of Power Electronics in EVs
6.2 Common Power System Architectures in EVs
6.3 Advanced Diagnostic Techniques: Signals and Analysis
6.4 Functional Verification of Key Components: Inverters, Converters, etc.
6.5 Diagnostic Tools and Equipment: Oscilloscopes, Analyzers
6.6 Common Faults and Troubleshooting in Power Systems
6.7 Interpreting EV System Schematics and Diagrams
6.8 On-Board Diagnostic (OBD) and Communication Protocols
6.9 Stress Testing and Fault Simulation
6.60 Diagnostic Reports and Documentation
2.6 Power Electronics Design Principles for EVs
2.2 Component Selection and Specification: IGBTs, MOSFETs, etc.
2.3 Circuit Design: Inverters, DC-DC Converters, Chargers
2.4 Simulations and Modeling of Power Systems in EVs
2.5 Prototype Testing: Performance and Efficiency Evaluation
2.6 System Validation: Safety and Reliability Testing
2.7 Design and Testing Standards and Regulations
2.8 Thermal Management and Component Cooling
2.9 Failure Analysis and Mitigation in Design
2.60 Design Documentation and Traceability
3.6 Component Evaluation: Criteria and Metrics
3.2 Performance Analysis: Efficiency, Losses, and Reliability
3.3 Component Optimization: Selection and Adaptation
3.4 Component Characterization: Models and Simulations
3.5 Component Stress and Lifecycle Testing
3.6 Impact of Components on EV Performance
3.7 Building Management System (BMS) Design
3.8 Component Selection: Criteria and Methods
3.9 Cost and Lifecycle Analysis of Components
3.60 Optimization Reports and Recommendations
4.6 Power electronics testing methodology
4.2 Testing equipment and tools: power analyzers, etc.
4.3 Static and dynamic testing of components and systems
4.4 Inverter testing: harmonic analysis and efficiency
4.5 Converter testing: performance and regulation
4.6 Charging system testing: protocols and safety
4.7 Interpretation of results: diagnosis and analysis
4.8 Test design: use cases and scenarios
4.9 Electromagnetic compatibility (EMC) testing
4.60 Documentation and analysis of test results
5.6 Implementation of specialized tests
5.2 High-voltage and insulation testing
5.3 Vibration and thermal shock testing
5.4 Strength and durability testing
5.5 Failure analysis and safety testing
5.6 Design of test fixtures and adapters
5.7 Test automation and data acquisition
5.8 Interpretation of results and data analysis
5.9 Report and documentation preparation
5.60 Validation of results and calibration
6.6 Performance testing of Inverters
6.2 Converter Performance Testing
6.3 On-Board Charging System Validation
6.4 Efficiency and Loss Analysis
6.5 Motor and Drive Control Testing
6.6 Energy Management System Validation
6.7 Safety and Reliability Testing
6.8 Test Design and Use Cases
6.9 Results Interpretation and Data Analysis
6.60 Documentation and Reporting
7.6 Advanced EV Testing Techniques
7.2 Complex Fault Diagnosis
7.3 Power System Calibration
7.4 Advanced Diagnostic Tools and Equipment
7.5 Signal and Trend Analysis
7.6 Troubleshooting and Repair
7.7 Predictive Maintenance in EV Systems
7.8 Performance Optimization
7.9 Data Analysis and Decision Making
7.60 Results Reporting and Documentation
8.6 Implementation of Specific Tests
8.2 Safety and Security Testing
8.3 Conformity and Certification Testing
8.4 Performance Testing Long-term
8.5 Failure analysis and failure modes
8.6 Test design and scenarios
8.7 Interpretation of results and analysis
8.8 Test automation and optimization
8.9 Documentation and report writing
8.60 Validation of results and traceability
- Hands-on methodology: test-before-you-trust, design reviews, failure analysis, compliance evidence.
- Software (depending on licenses/partners): MATLAB/Simulink, Python (NumPy/SciPy), OpenVSP, SU2/OpenFOAM, Nastran/Abaqus, AMESim/Modelica, acoustics tools, planning toolchains DO-178C.
- SEIUM Laboratories: scale rotor bench, vibrations/acoustics, EMC/Lightning pre-compliance, HIL/SIL for AFCS, data acquisition with strain gauging.
- Standards and compliance: EN 9100, 17025, ISO 27001, GDPR.
Capstone-type projects
Admissions, fees, and scholarships
- Profile: Background in Computer Engineering, Mathematics, Statistics, or related fields; practical experience in NLP and valued information retrieval systems.
- Documentation: Updated CV, academic transcript, SOP/statement of purpose, project examples or code (optional).
- Process: Application → Technical evaluation of profile and experience → Technical interview → Review of case studies → Final decision → Enrollment.
- Fees:
- Single payment: 10% discount.
- Payment in 3 installments: No fees; 30% upon registration + 2 equal monthly payments of the remaining 35%.
Monthly payment: available with a 7% commission on the total; annual review.
Scholarships: based on academic merit, financial need, and promoting inclusion; agreements with companies in the sector for partial or full scholarships.
See “Calendar & Calls for Applications,” “Scholarships & Grants,” and “Fees & Financing” in the SEIUM mega-menu.
Do you have any questions?
Our team is ready to help you. Contact us, and we will respond as soon as possible.
F. A. Q
Frequently asked questions
Yes, we have international certification
Yes: experimental models, real data, applied simulations, professional environments, real case studies.
It is not mandatory. We offer leveling tracks and tutoring.
Completely. It covers e-propulsion, integration, and emerging regulations (SC-VTOL).
Recommended. There are also internal challenges and consortiums.
Yes. Online/hybrid modality with planned labs and visa support (see “Visa & Residence”).