Motorcycle preparation course for Moto3
About our
The Moto3 Motorcycle Preparation Course focuses on training technicians and mechanics in the specifics of the motorcycles used in Moto3 competition. It covers advanced mechanics, engine performance, racing electronics, and chassis and suspension tuning, essential for optimizing track performance. Telemetry and data analysis are explored, and safety and technical regulations are included. The course aims to train competent professionals in the maintenance and preparation of high-performance motorcycles, preparing participants for key roles in Moto3 teams.
The program offers hands-on experience in real-world environments, with access to racing motorcycles and specialized tools. Participants acquire skills in fault diagnosis, complex repairs, and adapting the motorcycle to the rider’s and track’s needs. Knowledge of high-tech materials and the application of adjustment and calibration techniques are fostered. The course prepares technicians to work on racing teams, increasing their employability in the world of professional motorcycling.
Motorcycle preparation course for Moto3
- Format: Hybrid
- Duration: 3 months
- Hours: 300 H
- Language: English / Spanish
- Registration date: 23-10-2026
- Start date: 12-12-2026
- Available places: 3
725 $
Competencies and results
What you will learn
1. Optimization and tuning of Moto3 motorcycles: A comprehensive course
Diagnosis and troubleshooting of Moto3 engines, including injection, ignition, and electronic management systems.
Adjustment and calibration of front and rear suspension to optimize track performance, considering different track layouts and weather conditions.
Advanced chassis setup techniques, such as geometry modification, weight balance, and tire selection.
Identification and correction of braking system faults, including analysis of brake discs, pads, and fluid, as well as system bleeding and maintenance.
Optimization of engine performance through modification of internal components, such as camshafts, pistons, and exhaust systems.
Analysis and adjustment of the transmission, including gear ratio selection, chain maintenance, and proper lubrication.
Use of advanced diagnostic tools, such as scanners and data analyzers, to identify and troubleshoot problems in real time.
Implementation of race management strategies, including pit stop planning and rider communication.
Knowledge of Moto3 technical regulations and their application to motorcycle design and setup.
Development of practical workshop skills, including the use of specialized tools and the performance of maintenance and repair tasks.
2. Technical Mastery and Precise Tuning for Moto3: Comprehensive Preparation Course
- Master advanced telemetry and track performance data analysis to optimize bike setup.
- Refine Moto3 riding technique, including acceleration, braking, and cornering control, through simulation and practice.
- Understand and adjust suspension, tires, and traction control systems to maximize grip and stability in varying conditions.
- Optimize bike ergonomics and rider position to improve performance and physical endurance.
- Analyze and diagnose common Moto3 mechanical problems, applying a systematic approach to troubleshooting.
- Make precise adjustments to the engine and transmission for maximum power and efficiency.
- Develop effective race strategies, including tire management, pit stop strategy selection, and competitive analysis.
- Understand and apply the Moto3 technical regulations, ensuring compliance with the rules and the legality of the modifications made.
Use specialized workshop tools and equipment for the maintenance and repair of Moto3 components.
Improve communication and collaboration with the technical team to achieve optimal performance on the track.
3. Comprehensive user-oriented design and validation (from modeling to manufacturing)
You will learn to integrate the entire product development process, from initial model conception to final validation, applying user-centered methodologies. You will develop skills in parametric design, ergonomics, simulation, sustainable materials, 3D visualization, and manufacturing management, ensuring efficient, safe solutions that meet current industry standards.
4. Specialization in Moto3: High Performance Preparation and Adjustments
Here is the SEO-optimized content, just as you requested:
4. Moto3 Specialization: High-Performance Preparation and Tuning
Master advanced telemetry for engine performance optimization and power management.
Delve into chassis dynamics, including geometry, weight balance, and flex, for precise setup.
Apply high-performance suspension strategies, analyzing and adjusting components such as forks, dampers, and linkages to maximize grip and stability.
Understand and optimize the braking system, including analyzing discs, pads, master cylinders, and calipers, for efficient and consistent braking.
Study and adjust the bike’s aerodynamics, including fairings, wings, and deflectors, to improve top speed and cornering stability.
Analyze different tire compounds and their impact on performance, adapting the setup accordingly. The bike adapts to track conditions and the rider’s riding style.
Learn data analysis and simulation techniques to predict and optimize bike performance in different race situations.
Develop team management skills and effective communication with riders, engineers, and mechanics to maximize success in competition.
5. Learn how to prepare your motorcycle for Moto3: Detailed Preparation Course
5. Learn to Prepare Your Motorcycle for Moto3: Detailed Preparation Course
- Engine Diagnostics and Optimization: You will understand the mechanics of Moto3 racing engines, from component selection to performance optimization for maximum power and reliability.
- Preparation and Tuning Cycle: You will learn to make precise adjustments to the suspension, brakes, tires, and electronics to adapt to different tracks and weather conditions.
- Chassis and Geometry: You will master modifying chassis geometry, including ride height, steering angle, and weight distribution, to improve agility and stability in corners.
- Aerodynamics: You will understand the importance of aerodynamics in racing motorcycles and learn to optimize fairings, wings, and other elements to reduce wind resistance and increase downforce.
- Advanced Electronics: You will delve into the world of racing electronics, including engine management, Traction control, anti-wheelie, and data logging will help you get the most out of your motorcycle.
Specialized Materials and Components: You will learn about the high-tech materials and components used in Moto3 motorcycles, such as carbon fiber, titanium, and magnesium, and how to select and use the right components.
Simulation and Analysis: You will use simulation and analysis tools to evaluate motorcycle performance and make precise adjustments based on objective data.
Telemetry Techniques: You will learn how to analyze telemetry data to identify areas for improvement in motorcycle setup and rider performance.
Race Strategies: You will develop skills in analyzing race strategies, tire management, and real-time decision-making.
Safety and Regulations: You will become familiar with FIM safety regulations and learn how to prepare your motorcycle to meet safety requirements.
6. Advanced Moto3 Engine Preparation: Expert Tuning Course
6. **Advanced Moto3 Engine Preparation: Expert Tuning Course**
Diagnosis and troubleshooting of complex problems in Moto3 engine ignition, injection, and electronic management systems.
Optimization of combustion and engine performance through precise adjustments of air-fuel mixture, ignition timing, and other critical parameters.
In-depth analysis of telemetry and acquisition data to identify areas for improvement and fine-tune engine settings.
Mastery of the most advanced diagnostic tools and equipment used in Moto3 competition.
Specialization in preparing key engine components, such as cylinder heads, crankshafts, pistons, and valves, to maximize power and reliability.
Specific tuning and adjustment techniques for different track and weather conditions.
Engine temperature management and system optimization. Cooling.
Evaluation and selection of high-performance components for Moto3 engines, including exhaust systems, air filters, and other elements.
Development of engine management strategies to optimize performance and durability in racing.
Training in the use of engine simulation and analysis software to predict performance and optimize setup.
Who this program is for:
Motorcycle preparation course for Moto3
- Motorcycle mechanics with racing experience.
- Engineers from Moto3 teams and similar categories.
- Technicians specializing in motorcycle engine and chassis preparation.
- Mechanical engineering students or related fields with an interest in Moto3.
- Standards-driven curriculum: you will work with CS-27/CS-29, DO-160, DO-178C/DO-254, ARP4754A/ARP4761, ADS-33E-PRF from the first module.
- Accreditable laboratories (EN ISO/IEC 17025) with rotor bench, EMC/Lightning pre-compliance, HIL/SIL, vibrations/acoustics.
- Evidence-oriented TFM: safety case, test plan, compliance dossierand operational limits.
- Mentored by industry: teachers with experience in rotorcraft, tiltrotor, eVTOL/UAM and flight test.
- Flexible modality (hybrid/online), international cohorts and support from SEIUM Career Services.
- Ethics and security: safety-by-design approach, cyber-OT, DIH and compliance as pillars.
1.1 Moto3 Fundamentals
1.2 Main Components of a Moto3 Motorcycle
1.3 Moto3 Regulations and Technical Rules
1.4 Essential Tools and Equipment for Preparation
1.5 Workshop Safety and Component Handling
1.6 Importance of Documentation and Data Recording
1.7 Introduction to Engine Performance Optimization
1.8 Basic Principles of Motorcycle Aerodynamics
1.9 Suspension Systems and Their Impact on Handling
1.10 The Rider’s Role in the Preparation Process
2.2 Selection and Analysis of Key Components in Moto3
2.2 Suspensions: Advanced Adjustment and Optimization
2.3 Brakes: Selection, Maintenance, and Superior Performance
2.4 Tires: Choice, Pressure, and Wear Analysis
2.5 Intake and Exhaust Systems: Modification and Tuning
2.6 Motorcycle Electronics: Diagnostics and Configuration
2.7 Chassis: Geometry and Critical Adjustment Points
2.8 Engine Components: Selection and Replacement
2.9 Materials and Manufacturing of High-Performance Components
2.20 Data Analysis and Telemetry in Component Selection
3.3 Moto3 Engines: Types and Operation
3.2 Engine Components: Crankshaft, Pistons, Valves
3.3 Fuel Systems: Injection, Carburetion
3.4 Ignition Systems: Types and Adjustments
3.5 Cooling Systems: Air, Liquid
3.6 Transmission: Clutch, Gearbox, Chain
3.7 Chassis and Suspension: Components and Adjustments
3.8 Braking Systems: Types and Maintenance
3.9 Electronics: Sensors and Control Units
3.30 Tires: Types and Pressures
4.4. High-Performance Components and Their Specifications in Moto3
4.2. Suspension and Chassis Settings for Optimizing Agility
4.3. Advanced Braking Systems: Performance and Maintenance
4.4. Engine Management Strategies: Power and Efficiency
4.5. Tires: Selection, Pressure, and Track Performance
4.6. Telemetry and Data Analysis for Performance Improvement
4.7. Setup Strategies for Different Race Conditions
4.8. Developing Race Strategies and Risk Management
4.9. Preventive Maintenance and Troubleshooting During Races
4.40. Rider-Machine Integration: Communication and Synergy
5.5 Complete Moto3 Engine Disassembly
5.5 Component Identification and Classification
5.3 Essential Tools and Equipment
5.4 Wear and Damage Assessment
5.5 Documentation and Data Recording
5.6 Parts Cleaning and Preparation
5.7 Visual Inspection and Measurement Techniques
5.8 Common Failure Analysis
5.9 Selection of Replacement Components
5.50 Safety and Security Considerations
6.6 Understanding Moto3 Engines: Components and Operation
6.2 Detailed Analysis of the Cylinder Head and Valve Train
6.3 Optimizing the Intake and Exhaust Systems
6.4 Fine-Tuning Carburetion and Electronic Fuel Injection
6.5 Evaluating and Improving Performance on the Test Bench
6.6 Analyzing and Optimizing the Engine Control Unit (ECU)
6.7 Diagnosing and Troubleshooting Specific Moto3 Engine Problems
6.8 Advanced Preparation and Tuning Techniques for Different Circuits
6.9 Preventive Maintenance and Extending Engine Life
6.60 Strategies for Maximizing Engine Power and Reliability
- Hands-on methodology: test-before-you-trust, design reviews, failure analysis, compliance evidence.
- Software (depending on licenses/partners): MATLAB/Simulink, Python (NumPy/SciPy), OpenVSP, SU2/OpenFOAM, Nastran/Abaqus, AMESim/Modelica, acoustics tools, planning toolchains DO-178C.
- SEIUM Laboratories: scale rotor bench, vibrations/acoustics, EMC/Lightning pre-compliance, HIL/SIL for AFCS, data acquisition with strain gauging.
- Standards and compliance: EN 9100, 17025, ISO 27001, GDPR.
Capstone-type projects
Admissions, fees, and scholarships
- Profile: Background in Computer Engineering, Mathematics, Statistics, or related fields; practical experience in NLP and valued information retrieval systems.
- Documentation: Updated CV, academic transcript, SOP/statement of purpose, project examples or code (optional).
- Process: Application → Technical evaluation of profile and experience → Technical interview → Review of case studies → Final decision → Enrollment.
- Fees:
- Single payment: 10% discount.
- Payment in 3 installments: No fees; 30% upon registration + 2 equal monthly payments of the remaining 35%.
Monthly payment: available with a 7% commission on the total; annual review.
Scholarships: based on academic merit, financial need, and promoting inclusion; agreements with companies in the sector for partial or full scholarships.
See “Calendar & Calls for Applications,” “Scholarships & Grants,” and “Fees & Financing” in the SEIUM mega-menu.
Do you have any questions?
Our team is ready to help you. Contact us, and we will respond as soon as possible.
F. A. Q
Frequently asked questions
Yes, we have international certification
Yes: experimental models, real data, applied simulations, professional environments, real case studies.
It is not mandatory. We offer leveling tracks and tutoring.
Completely. It covers e-propulsion, integration, and emerging regulations (SC-VTOL).
Recommended. There are also internal challenges and consortiums.
Yes. Online/hybrid modality with planned labs and visa support (see “Visa & Residence”).