Apply now
CourseInsurance, Risk & Actuarial Data Enrolment open

Course in Reverse Engineering Applied to Classic Components

Online 300-hour course in reverse engineering applied to classic components. 6 modules covering ISO 1101 (geometrical tolerances), ISO 286-1 (ISO system of limits and fits) and Geomagic Design X. Assigned tutor and open enrolment.

Duration300 h
ModeHybrid
LanguageEnglish / Spanish
Start datesOctober / March
LocationEurope (Madrid)
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor
Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Define the scope and limitations of reverse engineering for classic components.

02

Study the original part to identify function, wear and modifications.

03

Obtain the geometry through scanning and measurement and rebuild a CAD model.

04

Determine the material and manufacturing process of the original part.

05

Manufacture and validate the rebuilt part against the original.

06

Manage the industrial property and ethical aspects of reproduction.

07

Carry out a complete reverse engineering project.

Profile

Who it's for

  • Reverse engineering engineer who wishes to specialise in reverse engineering applied to classic components.
  • 3D scanning and metrology technician who wishes to specialise in reverse engineering applied to classic components.
  • Component CAD designer who wishes to specialise in reverse engineering applied to classic components.
  • Manufacturer of period spare parts who wishes to specialise in reverse engineering applied to classic components.
  • Quality technician who wishes to specialise in reverse engineering applied to classic components.
  • Classic vehicle restorer who wishes to specialise in reverse engineering applied to classic components.
  • Graduates in engineering or sciences seeking to enter period spare parts manufacturing.
Standards & tools

What you'll work with

  • ISO 1101 (geometrical tolerances)
  • ISO 286-1 (ISO system of limits and fits)
  • ISO 10360-8 (optical-sensor measuring machines)
  • VDI/VDE 2634-2 (optical 3D measuring systems)
  • ISO 10303 (STEP, product data exchange)
  • Regulation (EC) No 6/2002 (Community designs and models)
Syllabus

6 modules · 300 h

  1. 1.1What reverse engineering of a component is
  2. 1.2Discontinued parts and the problem they pose
  3. 1.3Scope: form, material and function
  4. 1.4Legal framework and industrial property
  5. 1.5Reproduction for personal use and for sale
  6. 1.6Team and necessary resources
  7. 1.7Realistic timescales and costs
  8. 1.8Project documentation
  9. 1.9Criteria for success
  10. 1.10Workshop: scope of a reverse engineering project
  1. 2.1Function of the part within the assembly
  2. 2.2Interfaces with other parts
  3. 2.3Stresses and service conditions
  4. 2.4Wear and deformation of the available specimen
  5. 2.5Markings, numbering and dates
  6. 2.6Photography and prior recording
  7. 2.7Documented disassembly
  8. 2.8Unique part and its protection
  9. 2.9Searching for a second specimen
  10. 2.10Practice: study report on a part
  1. 3.1Manual measurement and dimensioned sketch
  2. 3.2Three-dimensional scanning
  3. 3.3Reconstruction of damaged areas
  4. 3.4Parametric modelling
  5. 3.5Deciding whether to replicate or correct defects
  6. 3.6Tolerances and fits
  7. 3.7Verifying the model against the part
  8. 3.8Manufacturing drawings
  9. 3.9Archiving and version control
  10. 3.10Practice: model and drawing of a part
  1. 4.1Identification of the original material
  2. 4.2Hardness and composition testing
  3. 4.3Current material equivalents
  4. 4.4Original manufacturing process
  5. 4.5Alternative process available today
  6. 4.6Heat and surface treatments
  7. 4.7Cost by process
  8. 4.8Supplier minimum batch
  9. 4.9Final technical specification
  10. 4.10Practice: material and process specification
  1. 5.1Requesting quotations from suppliers
  2. 5.2First article and its approval
  3. 5.3Dimensional inspection of the received part
  4. 5.4Functional testing
  5. 5.5Fitting and testing on the vehicle
  6. 5.6In-service monitoring
  7. 5.7Design correction after testing
  8. 5.8Validation documentation
  9. 5.9Decision to produce a series
  10. 5.10Practice: validation plan for a part
  1. 6.1Safety parts and their limits
  2. 6.2Marking the part as a reproduction
  3. 6.3Honest information for the customer
  4. 6.4Ownership of drawings and tooling
  5. 6.5Sale to third parties and obligations
  6. 6.6Collaboration with clubs and other workshops
  7. 6.7Keeping the technical archive
  8. 6.8Common project errors
  9. 6.9Documented real cases
  10. 6.10Final project: complete reverse engineering project
Methodology, software & labs

How you'll learn

100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is Geomagic Design X, ZEISS INSPECT, SolidWorks, Fusion 360, Agisoft Metashape, in free, academic or evaluation versions. Testing is studied through real procedures: 3D scanning of an original component, CAD reconstruction with deviation analysis, material identification and validation of the part. Assessment is continuous per module plus the final integrating project.

Laboratories ready for accreditation(EN ISO/IEC 17025) with a rotor rig, EMC/lightning pre-compliance, HIL/SIL, vibration/acoustics.
Evidence-oriented Master's Thesis:safety case, test plan, compliance dossier and operating limits.
Industry mentoring:lecturers with experience in training, , eVTOL/UAM and flight test.
Flexible delivery(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:a safety-by-design approach, with cyber-OT, DIH and compliance as its pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Safety-critical parts and their limits

Define the scope and limitations of reverse engineering for classic components.

Marking the part as a reproduction

Study the original part to identify function, wear and modifications.

Honest information for the customer

Obtain the geometry through scanning and measurement and rebuild a CAD model.

Ownership of drawings and tooling

Determine the material and manufacturing process of the original part.

Sale to third parties and obligations

Manufacture and validate the rebuilt part against the original.

Career opportunities

Where this takes you

Reverse engineering engineer3D scanning and metrology technicianComponent CAD designerPeriod spare parts manufacturerQuality technicianClassic vehicle restorer
Admissions & scholarships

Requirements

  • No prior degree required.
  • Internet connection and a computer capable of running the programme's software.
  • Spanish language level sufficient to follow technical standards.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme comprises 300 hours in total, spread over 3 to 5 months. That is between 10 and 15 hours a week on average, compatible with full-time work.

You will work with Geomagic Design X, ZEISS INSPECT, SolidWorks, Fusion 360, Agisoft Metashape. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.

A SEIUM diploma of your own upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.

Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the higher programme. Check the recognition policy when you enrol.

Keep exploring

Related programmes

See all in Insurance, Risk & Actuarial Data
Course380 $

Classic Radiators Course: Repair and Maintenance

300-hour online course in classic radiators: repair and maintenance. 6 modules covering ASTM D3306 (glycol-based coolants), ISO 17672 (brazing: filler metals) and advanced Excel (repair log).…

300 hHybridInsurance, Risk & Actuarial Data
Course649 $

Course in Ethics in the Deployment of UAV Systems in Civil Environments

Online 300-hour course in ethics in the deployment of UAV systems in civil environments. 6 modules covering Implementing Regulation (EU) 2019/947 (UAS operations), Delegated Regulation (EU)…

300 hOnlineAerospace, UAM, Drones & Space
Course699 $

Course in Cryogenics in Nuclear Fusion

Online 300 h course in cryogenics in nuclear fusion. 6 modules covering EN 13458 (static vacuum-insulated cryogenic vessels), Directive 2014/68/EU (pressure equipment) and HEPAK. Assigned tutor…

300 hOnlineInsurance, Risk & Actuarial Data
Course in Reverse Engineering Applied to Classic ComponentsEnrol
Related programmes

More in Motorcycles & 2-Wheelers

Course in Onshore Wind Farm EngineeringView programme →MARPOL and SOLAS Compliance CourseView programme →BIM Course in Underground InfrastructureView programme →Ethics in the Social Impact of Defence CourseView programme →Fatigue Course for Steel and Aluminium HullsView programme →Physical Modelling in Towing Tank CourseView programme →

All Motorcycles & 2-Wheelers programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.