Course in Operation in Extreme Terrain: Mountain
Online 300-hour course in operation in extreme terrain: mountain. 6 modules covering ISO 11079 (cold stress), Royal Decree 1215/1997 (work equipment) and AutoCAD Civil 3D. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the effects of altitude and cold on the machine and the operator.
Prepare machinery for cold starts, ice and low air density.
Design stable access roads and work platforms on slopes.
Apply safe operating techniques on gradients and embankments.
Organise emergency response and rescue in hard-to-reach areas.
Assess the environmental impact of earthworks in mountain areas.
Develop a mountain work plan with safety and environmental criteria.
Who it's for
- High-mountain site manager looking to specialise in Operation in Extreme Terrain: Mountain.
- Expert machinery operator on slopes looking to specialise in Operation in Extreme Terrain: Mountain.
- Prevention technician on mountain works looking to specialise in Operation in Extreme Terrain: Mountain.
- Earthmoving engineer looking to specialise in Operation in Extreme Terrain: Mountain.
- Emergency coordinator in remote areas looking to specialise in Operation in Extreme Terrain: Mountain.
- Fleet supervisor in cold climates looking to specialise in Operation in Extreme Terrain: Mountain.
- Graduates in engineering or science seeking to enter hydraulic works and dams.
What you'll work with
- ISO 11079 (cold stress)
- Real Decreto 1215/1997 (work equipment)
- ISO 3471 (roll-over protective structures ROPS)
- ISO 3450 (braking systems of earth-moving machinery)
- ISO 3449 (falling object protective structures FOPS)
- Real Decreto 1627/1997 (safety on construction sites)
- ISO 14001 (environmental management)
6 modules · 300 h
1.1Altitude, pressure and their effect on engines and people1.2Low temperatures and daily thermal variation1.3Snow, ice and seasonal working windows1.4Slopes, hillsides and ground stability1.5Rockfalls, avalanches and geological risk1.6Narrow access routes, tight bends and cornice tracks1.7Changing weather and local forecasting1.8Isolation and rescue times1.9Loading and unloading on restricted platforms1.10Workshop: characterising a mountain site
2.1Loss of power at altitude and its compensation2.2Intake, turbo and cooling systems2.3Cold starting: batteries, pre-heaters and fuels2.4Fluids and lubricants for low temperatures2.5Tyres, chains and tracks for snow and ice2.6Brakes and retarders on prolonged descents2.7Stability: centre of gravity and inclination limits2.8Protective structures and climate-controlled cab2.9Specific safety equipment2.10Practice: specifying a machine for high mountain work
3.1Layout of mountain tracks and permissible gradients3.2Widths, extra widths and passing zones3.3Work platforms on slopes and berms3.4Embankments: inclination, drainage and protection3.5Walls, gabions and temporary retaining structures3.6Drainage and control of meltwater3.7Blasting and rock excavation: coordination and control3.8Management of surplus material3.9Periodic inspection of the track3.10Practice: designing an access road on a slope
4.1Working limits on slopes by machine type4.2Working direction, ascent and descent4.3Prohibited manoeuvres and tipping points4.4Working with dump trucks and loads on slopes4.5Descent with load and speed control4.6Use of towing machinery and winches4.7Coordination between machines and signage4.8Night work and reduced visibility4.9Suspension of activity due to conditions4.10Practice: work procedure on a slope
5.1Risk assessment of the mountain environment5.2Clothing and equipment against cold and wind5.3Altitude exposure and staff acclimatisation5.4Shift organisation and rest breaks5.5Avalanche risk: assessment and protocols5.6Communications in areas without coverage5.7Slope rescue and available resources5.8Medical evacuation and coordination with emergency services5.9Drills and specific training5.10Practice: emergency plan for a mountain site
6.1Seasonal planning and performance curve6.2Supply logistics and storage at height6.3Site camp and services6.4Authorisations and protected natural areas6.5Protection of watercourses, soils and high-altitude flora6.6Slope restoration and revegetation6.7Safety and progress indicators6.8Specific costs of mountain work6.9Common errors in mountain operations6.10Final project: complete operation plan for high-mountain work
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, making it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is AutoCAD Civil 3D, QGIS, Trimble Business Center, Microsoft Project, in free, academic or trial versions. Tests are studied using real procedures for stability studies of slope platforms, route planning with gradients and adverse weather, and mountain rescue drills. Assessment is continuous by module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Identify the effects of altitude and cold on the machine and the operator.
Prepare machinery for cold starts, ice and low air density.
Design stable access roads and work platforms on slopes.
Apply safe operating techniques on gradients and embankments.
Organise emergency response and rescue in hard-to-reach areas.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.
The course uses AutoCAD Civil 3D, QGIS, Trimble Business Center and Microsoft Project. Free, academic or trial versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or Postgraduate Diploma in the same area are recognised towards the higher-level programme. Check the recognition policy when you enrol.
Related programmes
CBRN Risk Management in Cities Course
300-hour online course in CBRN risk management in cities. 6 modules covering Directive 2012/18/EU (Seveso III), Royal Decree 840/2015 (major accidents involving dangerous substances) and ALOHA…
Rear shock absorber and progressive link course
Rear Shock Absorbers and Progressive Links Course Explore the design, operation, and maintenance of rear suspension systems in vehicles, focusing on shock absorbers and the use…
Course in Nickel Baths and Galvanising Processes
Online course of 300 h in nickel baths and galvanising processes. 6 modules covering ISO 1456 (electrolytic nickel and chromium coatings), ISO 1461 (hot-dip galvanising) and…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships