Course in Homologation Testing for Mining Machinery
Online 300-hour course in homologation testing for mining machinery. 6 modules covering RD 863/1985 (General Regulation on Basic Mining Safety Standards) and its ITCs, Directive 2014/34/EU (ATEX, equipment for explosive atmospheres) and ANSYS Mechanical. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the European and Spanish regulatory framework applicable to mining equipment.
Plan performance, braking and operator protection tests.
Apply the specific requirements for equipment intended for potentially explosive atmospheres.
Evaluate control and command systems in accordance with functional safety.
Prepare technical files and reports for equipment authorisation.
Coordinate relations with notified bodies and the mining authority.
Estimate the timescales and costs of a mining homologation process.
Who it's for
- Mining equipment homologation engineer who wishes to specialise in Homologation Testing for Mining Machinery.
- Mining safety manager who wishes to specialise in Homologation Testing for Mining Machinery.
- ATEX certification technician who wishes to specialise in Homologation Testing for Mining Machinery.
- Functional safety engineer who wishes to specialise in Homologation Testing for Mining Machinery.
- Mine maintenance manager who wishes to specialise in Homologation Testing for Mining Machinery.
- Mining authority technician who wishes to specialise in Homologation Testing for Mining Machinery.
- Engineering or science graduates seeking to enter underground mining.
What you'll work with
- RD 863/1985 (General Regulation on Basic Mining Safety Standards) and its ITCs
- Directive 2014/34/EU (ATEX, equipment for explosive atmospheres)
- IEC 60079-0 (explosive atmospheres: general requirements)
- ISO 3471 (ROPS)
- ISO 3449 (FOPS)
- ISO 15998 (electronic control systems in earth-moving machinery)
- ISO 13849-1 (safety of machinery control system parts)
- EN 474-1 (earth-moving machinery: safety)
6 modules · 300 h
1.1Machinery regulations and mining regulations: two layers1.2Mining safety regulation and its scope1.3Underground and surface equipment: different requirements1.4Authorisation to enter service at the mine1.5Documentation required by the mining authority1.6Potentially explosive atmospheres in mining1.7Zone classification and suitable equipment1.8Responsibility of the manufacturer and the operator1.9Imported equipment and its conformity1.10Workshop: identifying the requirements of a piece of equipment
2.1Braking tests for mining vehicles2.2Stability and gradient tests2.3Operator station visibility tests2.4Protection against overturning and falling objects2.5Load capacity and lifting tests2.6Emergency steering system tests2.7Fire protection and fluid resistance2.8Lighting and signalling tests2.9Instrumentation and traceability of measurements2.10Practice: test programme for a mining dump truck
3.1Flammable gas and dust risk underground3.2Flameproof equipment and its marking3.3Surface temperature and ignition sources3.4Ventilation and its relationship with the equipment3.5On-board gas detection systems3.6Underground fire protection3.7Low-smoke emission materials3.8Specific tests for underground equipment3.9Maintenance that preserves protection3.10Practice: verification of underground equipment
4.1Safety functions of mining equipment4.2Required performance level and its justification4.3Emergency stop and safe states4.4Interlocks and energy isolation4.5Proximity detection systems4.6Teleoperated and autonomous equipment: requirements4.7Validation of control software4.8Cybersecurity of connected equipment4.9Documentation of the safety analysis4.10Practice: definition of safety functions
5.1Structure of the technical file for the equipment5.2Test reports and bodies involved5.3Instruction and maintenance manual5.4Marking, plates and on-board documentation5.5Authorisation of the equipment for operation at the mine5.6Periodic inspections and statutory reviews5.7Modifications and refurbishment of the equipment5.8Equipment history record5.9Market surveillance and defect reporting5.10Practice: review of a mining equipment file
6.1Planning the certification project6.2Cost and timescales of the process6.3Relations with the manufacturer, laboratory and authority6.4Additional requirements imposed by the operator6.5Staff training on the requirements6.6Integration with the safety management system6.7Common errors in mining equipment homologation6.8Used equipment and transfer between mines6.9Requirements in international markets6.10Final project: certification plan for a mining machine
How you'll learn
Fully 100% online training on the SEIUM Institute campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is ANSYS Mechanical, MATLAB, SOLIDWORKS, advanced Excel, in free, academic or evaluation versions. Tests are studied using real conformity review procedures for underground mining equipment, braking and stability tests, and documentary audits for authorisation. Assessment is continuous across each module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the European and Spanish regulatory framework applicable to mining equipment.
Plan performance, braking and operator protection tests.
Apply the specific requirements for equipment intended for potentially explosive atmospheres.
Evaluate control and command systems in accordance with functional safety.
Prepare technical files and reports for equipment authorisation.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 300 hours in total, spread over 3 to 5 months. That is an average of between 10 and 15 hours per week, compatible with a full-time job.
The course works with ANSYS Mechanical, MATLAB, SOLIDWORKS, advanced Excel. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An SEIUM Institute own diploma upon passing the continuous assessment and the integrating project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the advanced programme. Check the recognition policy when you enrol.
Related programmes
Fundamentals of Terramechanics Course
300-hour online course in fundamentals of terramechanics. 6 modules covering ASABE S313 (cone penetrometer for soils), ASABE EP542 (cone penetrometer operating procedure) and MSC Adams. Assigned…
Drones in Agricultural Machinery Monitoring Course
Online 300-hour course in drones for agricultural machinery monitoring. 6 modules covering Implementing Regulation (EU) 2019/947 (UAS operations), Delegated Regulation (EU) 2019/945 (unmanned aircraft systems) and…
Course in Virtual Reality for Off-Road Training
Online 300-hour course in virtual reality for off-road training. 6 modules covering Law 31/1995 on Occupational Risk Prevention, Royal Decree 1215/1997 (work equipment) and Unity. Assigned…
More in Off-Road, Special Vehicles & Machinery
All Off-Road, Special Vehicles & Machinery programmes → · How to apply · Fees & financing · Scholarships