Apply now
CourseElectromobility, Batteries & Hydrogen Enrolment open

Certification of Quality in Restored Spare Parts Course

Online 300 h course in quality certification of restored spare parts. 6 modules covering ISO 9001 (quality management systems), IATF 16949 (quality in the automotive industry) and Minitab. Assigned tutor and open enrolment.

Duration300 h
ModeHybrid
LanguageEnglish / Spanish
Start datesOctober / March
LocationEurope (Madrid)
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor
Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Define what guarantees the quality of a restored part.

02

Prepare a part-specific quality plan with controls and acceptance criteria.

03

Select non-destructive and dimensional tests and verifications.

04

Prepare the technical documentation that accompanies the part.

05

Apply enhanced controls to parts that affect safety.

06

Manage complaints using continuous improvement tools.

07

Design an internal certification procedure for spare parts.

Profile

Who it's for

  • Supplier quality engineer who wants to specialise in Certification of Quality in Restored Spare Parts.
  • Non-destructive testing technician who wants to specialise in Certification of Quality in Restored Spare Parts.
  • Quality manager in a restoration workshop who wants to specialise in Certification of Quality in Restored Spare Parts.
  • Management systems auditor who wants to specialise in Certification of Quality in Restored Spare Parts.
  • Metrology technician who wants to specialise in Certification of Quality in Restored Spare Parts.
  • Complaints and warranty manager who wants to specialise in Certification of Quality in Restored Spare Parts.
  • Graduates in engineering or science looking to enter the manufacture of reproduction spare parts.
Standards & tools

What you'll work with

  • ISO 9001 (quality management systems)
  • IATF 16949 (quality in the automotive industry)
  • ISO 2859-1 (attribute sampling)
  • ISO 9934-1 (magnetic particle testing)
  • ISO 3452-1 (liquid penetrant testing)
  • ISO 6508-1 (Rockwell hardness)
  • Regulation (EU) 2023/988 (general product safety)
Syllabus

6 modules · 300 h

  1. 1.1What it means to certify a part
  2. 1.2Customer and market expectations
  3. 1.3Difference between new, repaired and reproduced parts
  4. 1.4Legal liability of the workshop
  5. 1.5Applicable warranties
  6. 1.6Available standards and references
  7. 1.7Absence of sector-specific regulation
  8. 1.8Self-regulation and good practice
  9. 1.9Minimum documentation
  10. 1.10Workshop: a workshop quality policy
  1. 2.1Starting specification
  2. 2.2Process inspection points
  3. 2.3Acceptance and rejection criteria
  4. 2.4Records for each phase
  5. 2.5Release responsible person
  6. 2.6Control of non-conforming parts
  7. 2.7Rework and its limit
  8. 2.8Traceability of materials and batches
  9. 2.9Technical file of the part
  10. 2.10Practice: a quality plan for a part
  1. 3.1Dimensional verification
  2. 3.2Hardness and material
  3. 3.3Applicable non-destructive tests
  4. 3.4Functional tests on the test bench
  5. 3.5Leak tests
  6. 3.6Load tests where applicable
  7. 3.7In-vehicle testing and its risk
  8. 3.8Sampling versus full inspection
  9. 3.9External laboratories
  10. 3.10Practice: defining the test plan
  1. 4.1Part certificate and its content
  2. 4.2Statement of the scope of work
  3. 4.3Materials and processes used
  4. 4.4Test results
  5. 4.5Photographs of the process
  6. 4.6Assembly and maintenance instructions
  7. 4.7Warranty conditions
  8. 4.8Declared limitations
  9. 4.9Signature and technical manager
  10. 4.10Practice: writing a certificate
  1. 5.1Classification of parts by criticality
  2. 5.2Brakes, steering and suspension
  3. 5.3Structural elements
  4. 5.4Tanks and pipework
  5. 5.5When certification should not be given
  6. 5.6Approved alternatives
  7. 5.7Communicating risk to the customer
  8. 5.8Workshop liability insurance
  9. 5.9Recording decisions
  10. 5.10Practice: assessing the criticality of five parts
  1. 6.1Handling a complaint
  2. 6.2Root cause analysis of a failure
  3. 6.3Corrective actions
  4. 6.4Workshop quality indicators
  5. 6.5Internal audit
  6. 6.6Staff training
  7. 6.7Relationship with suppliers and subcontractors
  8. 6.8Common errors in the sector
  9. 6.9Documented real cases
  10. 6.10Final project: a workshop part certification system
Methodology, software & labs

How you'll learn

100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is Minitab, advanced Excel, SolidWorks Inspection, PC-DMIS, in free, academic or evaluation versions. Tests are studied using real procedures for non-destructive testing of safety parts, dimensional verification with a coordinate measuring machine, and documentary audit of the quality file. Assessment is continuous, per module, plus the final integrating project.

Accreditable laboratories(EN ISO/IEC 17025) with rotor test rig, EMC/Lightning pre-compliance, HIL/SIL, vibration/acoustics.
Evidence-oriented final project:safety case, test plan, compliance dossier and operational limits.
Industry-led mentoring:lecturers with experience in training, , eVTOL/UAM and flight test.
Flexible study mode(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:a safety-by-design approach, OT cyber security, DIH and compliance as core pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Handling a complaint

Define what guarantees the quality of a restored part.

Root cause analysis of a failure

Prepare a part-specific quality plan with controls and acceptance criteria.

Corrective actions

Select non-destructive and dimensional tests and verifications.

Workshop quality indicators

Prepare the technical documentation that accompanies the part.

Internal audit

Apply enhanced controls to parts that affect safety.

Career opportunities

Where this takes you

Supplier quality engineerNon-destructive testing technicianQuality manager in a restoration workshopManagement systems auditorMetrology technicianComplaints and warranty manager
Admissions & scholarships

Requirements

  • No prior degree is required.
  • Internet connection and a computer capable of running the programme's software.
  • A level of Spanish sufficient to follow technical standards reading.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme consists of 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.

The course works with Minitab, advanced Excel, SolidWorks Inspection and PC-DMIS. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.

An own-brand SEIUM diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official Ministry qualification.

Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Please check the credit transfer policy when you enrol.

Keep exploring

Related programmes

See all in Electromobility, Batteries & Hydrogen
Course299 $

Tunnel Inspection Robot Course

The Tunnel Inspection Robots Course focuses on training in the use and implementation of robotic technology for tunnel inspection and maintenance. It includes learning about sensors,…

3 monthsOnlineElectromobility, Batteries & Hydrogen
Course320 $

Marine Batteries and ESS (Energy Storage Systems) Course

Online 300-hour course in marine batteries and ESS (Energy Storage Systems). 6 modules covering IEC 62619 Safety requirements for lithium batteries for industrial use, IEC 62620…

300 hOnlineElectromobility, Batteries & Hydrogen
Course780 $

Course in Oxy-Fuel Welding on Vintage Thin Sheet Metal

Online 300-hour course in oxy-fuel welding on vintage thin sheet metal. 6 modules covering ISO 4063 (welding processes: process 311, oxy-acetylene), ISO 9606-1 (qualification of welders:…

300 hOnlineElectromobility, Batteries & Hydrogen
Certification of Quality in Restored Spare Parts CourseEnrol
Related programmes

More in Restoration & Classics

Course on Ethics in Military Aerial AutonomyView programme →Corporate Fleet Insurance CourseView programme →Basel Course and Its Impact on Transport InsuranceView programme →Course in Actuarial Data Visualisation with BIView programme →Course in Cooling Systems for Historic CarsView programme →Course in Advanced Materials for Ceramic and Composite ArmourView programme →

All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.