Apply now
CourseDefense, Military Engineering & Land Systems Applications open

Diploma in NATO Base Protection Standards

Online postgraduate diploma of 800 hours in NATO base protection standards: 8 modules covering force protection under AJP-3.14, risk assessment, perimeter design to UFC 4-010-01, entry control to UFC 4-022-01, electronic security systems and protection management, with an assigned technical tutor.

Duration6–8 months
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor
Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Understand the NATO force protection framework.

02

Assess threats, vulnerabilities and risks for bases and installations.

03

Apply design standards for perimeters and access control.

04

Select certified barriers and detection systems.

05

Integrate electronic security systems.

06

Plan the protection of temporary and permanent bases.

07

Produce protection plans that comply with the standards.

Profile

Who it's for

  • Force protection specialists.
  • Physical security engineers.
  • Facility protection consultants.
  • Base security managers.
  • Surveillance systems engineers.
  • Infrastructure planners working on military sites.
  • Engineering or science graduates seeking to enter the defence sector.
Standards & tools

What you'll work with

  • AJP-3.14 (Allied joint doctrine for force protection)
  • UFC 4-010-01 (DoD minimum antiterrorism standards for buildings)
  • UFC 4-022-01 (entry control facilities)
  • ASTM F2656 (vehicle crash testing of perimeter barriers)
  • ISO 22343 (vehicle security barriers)
  • EN 50131 (intrusion alarm systems)
  • ISO 31000 (risk management)
  • ArcGIS Pro
  • AutoCAD
  • Genetec Security Center
  • Milestone XProtect
Syllabus

8 modules

  1. 1.1AJP-3.14 doctrine
  2. 1.2Components of force protection
  3. 1.3Threats to installations
  4. 1.4Temporary and permanent bases
  5. 1.5Command responsibilities
  6. 1.6Protection in multinational operations
  7. 1.7Coordination with the host nation
  8. 1.8Lessons learned
  9. 1.9National regulations
  10. 1.10Case study: analysis of an incident at a base
  1. 2.1The ISO 31000 process
  2. 2.2Threat assessment
  3. 2.3Vulnerability analysis
  4. 2.4Critical assets
  5. 2.5Risk matrices
  6. 2.6Design basis scenarios
  7. 2.7Consequence assessment
  8. 2.8Mitigation measures
  9. 2.9Residual risk
  10. 2.10Practical exercise: vulnerability assessment of a base
  1. 3.1Stand-off distances
  2. 3.2UFC 4-010-01 standards
  3. 3.3Vehicle barriers
  4. 3.4ASTM F2656 and ISO 22343 certification
  5. 3.5Fencing and obstacles
  6. 3.6Perimeter lighting
  7. 3.7Clear zones
  8. 3.8Drainage and weak points
  9. 3.9Landscape integration
  10. 3.10Lab: selection of certified barriers
  1. 4.1Entry control points according to UFC 4-022-01
  2. 4.2Design of inspection lanes
  3. 4.3Personnel control
  4. 4.4Vehicle control
  5. 4.5Identification and accreditation
  6. 4.6Goods inspection
  7. 4.7Visitor management
  8. 4.8Emergency procedures
  9. 4.9Capacity and flows
  10. 4.10Practical exercise: design of an entry control point
  1. 5.1EN 50131 intrusion detection
  2. 5.2Video surveillance and analytics
  3. 5.3Perimeter sensors
  4. 5.4Ground surveillance radar
  5. 5.5Control centres
  6. 5.6Systems integration
  7. 5.7Cybersecurity of the systems
  8. 5.8Power supply and redundancy
  9. 5.9Maintenance
  10. 5.10Case study: architecture of a control centre
  1. 6.1Building hardening
  2. 6.2Security glazing
  3. 6.3Shelters and collective protection
  4. 6.4CBRN protection of installations
  5. 6.5Firefighting
  6. 6.6Evacuation and assembly points
  7. 6.7Medical protection
  8. 6.8Continuity of services
  9. 6.9Counter-drone protection
  10. 6.10Workshop: protection plan for a critical building
  1. 7.1Base protection plan
  2. 7.2Alert levels
  3. 7.3Exercises and drills
  4. 7.4Personnel training
  5. 7.5Contracted security
  6. 7.6Security audits
  7. 7.7Protection indicators
  8. 7.8Incident management
  9. 7.9Continuous improvement
  10. 7.10Practical exercise: base protection tabletop exercise
  1. 8.1Description of the installation
  2. 8.2Site threat assessment
  3. 8.3Vulnerability analysis of the installation
  4. 8.4Perimeter design
  5. 8.5Access control system
  6. 8.6Electronic systems
  7. 8.7Protection plan
  8. 8.8Estimated budget
  9. 8.9Report and presentation
  10. 8.10Final project: final review with your tutor
Methodology, software & labs

How you'll learn

Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme can be combined with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is ArcGIS Pro, AutoCAD, Genetec Security Center and Milestone XProtect, in free, academic or evaluation versions. Practical work is based on real procedures: vulnerability assessment of a temporary base, design of an entry control point and selection of certified perimeter barriers. Assessment is continuous by module, plus the final project.

Standards covered: AJP-3.14, UFC 4-010-01, UFC 4-022-01, ASTM F2656, ISO 22343, EN 50131, ISO 31000.

Assigned technical tutor:every module ends with a deliverable that your tutor marks individually.
Standards-based learning:guided reading of AJP-3.14, UFC 4-010-01 and UFC 4-022-01 applied to real cases, not as a theoretical annex.
Industry software:ArcGIS Pro, AutoCAD, Genetec Security Center and Milestone XProtect, in free, academic or evaluation versions.
Final project:a complete protection project for a military installation, from threat assessment to perimeter, access control and estimated budget, reviewed by your tutor.
Flexible format:100% online, no fixed timetables, compatible with full-time work.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Threat and vulnerability assessment
Describe the installation and assess the threats and vulnerabilities of the site.
Perimeter design
Design the perimeter with stand-off distances and certified barriers.
Access control system
Design the entry control point and the access control system.
Electronic systems and protection plan
Integrate electronic security systems and draft the base protection plan with an estimated budget.
Final project
Present the complete base protection project, reviewed by your tutor.
Career opportunities

Where this takes you

Force protection specialistPhysical security engineerFacility protection consultantBase security managerSurveillance systems engineerInfrastructure planner
Admissions & scholarships

Requirements

  • Prior technical training or professional experience in the sector. No university degree is required.
  • An internet connection and a computer capable of running the programme software.
  • English sufficient to read technical standards.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.

You work with ArcGIS Pro, AutoCAD, Genetec Security Center and Milestone XProtect, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.

A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.

Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.

Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.

Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.

Keep exploring

Related programmes

See all in Defense, Military Engineering & Land Systems
Course1,000 $

Diploma in NATO/EU Data Security Standards

Online postgraduate diploma of 800 hours in NATO/EU data security standards. 8 modules covering NATO and EU security frameworks, information classification, personnel and industrial security, physical…

800 hours · 6–8 monthsOnlineDefense, Military Engineering & Land Systems
Course2,000 $

Diploma in Military AM Standards and Certification

Online postgraduate diploma of 800 hours in military additive manufacturing (AM) standards and certification. 8 modules covering the AM regulatory landscape, feedstock and process qualification, part…

800 hours · 6–8 monthsOnlineDefense, Military Engineering & Land Systems
Postgraduate Diploma1,000 $

Postgraduate Diploma in Structural Design of Heavy Armoured Vehicles

Online postgraduate diploma of 800 hours in the structural design of heavy armoured vehicles, structured in 8 modules covering vehicle architecture, structural materials, hull structural analysis,…

800 hours · 6–8 monthsOnlineDefense, Military Engineering & Land Systems
Diploma in NATO Base Protection StandardsEnrol
Related programmes

More in Defense, Military Engineering & Land Systems

Diploma in CBRN Protection Materials and ValidationView programme →Diploma in NATO Standards for AITView programme →Diploma in NATO Operational Continuity PlansView programme →Diploma in RAMS Applied to Land VehiclesView programme →Postgraduate Diploma in International Armoured Vehicle Safety StandardsView programme →Postgraduate Diploma in NATO Standards and Weapons Systems LegislationView programme →

All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.