Course in Emergency Vehicles: Wildland Firefighting
Online 300 h course in emergency vehicles: wildland firefighting. 6 modules covering EN 1846-1 (fire fighting and rescue service vehicles: classification), EN 1846-2 (common safety and performance requirements) and Wildfire Analyst. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the wildland fire engine and its classification under EN 1846.
Carry out the service readiness checks.
Plan access to the fire considering terrain and slope.
Explain firefighting techniques supported by the vehicle.
Apply safety and self-protection protocols in wildfires.
Organise vehicle maintenance and fleet management.
Develop a resource organisation project using a wildland fire vehicle.
Who it's for
- Wildland fire station chief who wants to specialise in Emergency Vehicles: Wildland Firefighting.
- Wildland firefighting technician who wants to specialise in Emergency Vehicles: Wildland Firefighting.
- Emergency vehicle fleet manager who wants to specialise in Emergency Vehicles: Wildland Firefighting.
- Fire prevention technician who wants to specialise in Emergency Vehicles: Wildland Firefighting.
- Fire-fighting bodywork engineer who wants to specialise in Emergency Vehicles: Wildland Firefighting.
- Emergency operations coordinator who wants to specialise in Emergency Vehicles: Wildland Firefighting.
- Graduates in engineering or science seeking to join firefighting services.
What you'll work with
- EN 1846-1 (fire fighting and rescue service vehicles: classification)
- EN 1846-2 (common safety and performance requirements)
- EN 1028-1 (centrifugal fire pumps)
- Royal Decree 893/2013 (Basic Directive on Wildfire Emergency Planning)
- Law 43/2003 on Forests (Ley de Montes)
- EN ISO 15384 (protective clothing for wildland firefighting)
- EN 1947 (semi-rigid and flat fire hoses)
6 modules · 300 h
1.1Vehicle types: light, heavy and water tender1.2Off-road chassis and firefighting bodywork1.3Water capacity, foam agent and power-to-weight ratio1.4Pump, flow rates and working pressures1.5Vehicle self-protection: water curtains and sprinkler systems1.6Suction and filling system1.7Hoses, branch pipes and accessories1.8Hand tool equipment1.9Standards and equipment required for the vehicle1.10Workshop: vehicle and equipment recognition
2.1Daily inspection of the vehicle and pump2.2Fluid levels, filters and tyre condition2.3Tank and foam agent checks2.4Pump and circuit testing2.5Hose and coupling inspection2.6Personal protective equipment for crew2.7Communications and radio check2.8Fuel loading and range2.9Documentation and service reports2.10Practice: full pre-service inspection
3.1Emergency driving with a loaded tank3.2Effect of moving water on stability3.3Forest tracks: width, surface and gradient3.4Turning manoeuvres and escape areas3.5Fords and difficult crossings3.6Driving with smoke and reduced visibility3.7Route selection and risk of getting stuck3.8Safe approach and vehicle positioning3.9Water point: location and filling3.10Practice: planning access to a fire
4.1Fire behaviour and reading the fire4.2Direct, indirect and parallel attack4.3Working with water lines from the vehicle4.4Use of foam agents and retardants4.5Hose laying and pressure management4.6Water economy and coordination with water tenders4.7Mobile attack and attack with a stationary vehicle4.8Coordination with aerial resources and crews4.9Mop-up and area monitoring4.10Practice: firefighting manoeuvre with the fire engine
5.1Risk situations and warning signs5.2Safety protocols and safety zones5.3Escape routes and refuges5.4Self-protection in the vehicle and outside it5.5Topography, wind and sudden changes in behaviour5.6Emergency communications and alert messages5.7Heat stroke, hydration and relief rotations5.8Entrapment: response procedure5.9Incident investigation and learning5.10Practice: analysis of a risk scenario
6.1Vehicle and pump maintenance6.2Replenishment of water, foam agent and equipment6.3Cleaning and preservation after service6.4Crew organisation and shifts6.5Driver training and accreditation6.6Preventive deployment and risk campaign6.7Coordination with operations and the command post6.8Response and operational readiness indicators6.9Common errors in fire engine operation6.10Final project: operational plan for a wildland fire engine
How you'll learn
Training 100 % online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Wildfire Analyst, FARSITE, QGIS, Advanced Excel, in free, academic or evaluation versions. Assessments are based on real procedures for pump verification and vehicle flow rates, fire spread simulation, and checks of the vehicle's protective equipment. Assessment is continuous per module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the wildland fire engine and its classification under EN 1846.
Carry out the service readiness checks.
Plan access to the fire considering terrain and slope.
Explain firefighting techniques supported by the vehicle.
Apply safety and self-protection protocols in wildfires.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow the reading of technical regulations.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with full-time work.
You will work with Wildfire Analyst, FARSITE, QGIS, Advanced Excel. Free, academic or evaluation versions are used, and the tutor will indicate the free alternative where one exists.
An SEIUM own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Check the credit transfer policy when you enrol.
Related programmes
Course in Fundamentals of Off-Road Vehicle Dynamics
Online course of 300 h in fundamentals of off-road vehicle dynamics. 6 modules with ISO 8855 (vehicle dynamics: vocabulary), ISO 2631-1 (whole-body vibration) and MATLAB/Simulink. Assigned…
Hydrogen Fuel Cell Integration in Machinery Course
Online 300-hour course in hydrogen fuel cell integration in machinery. 6 modules covering ISO 14687 (hydrogen fuel quality), IEC 62282-4-101 (fuel cells for electric industrial vehicles)…
Course on Hydraulic Systems for Agricultural Implements
Online 300-hour course on hydraulic systems for agricultural implements. 6 modules covering ISO 5675 (rapid hydraulic couplings for agricultural tractors), ISO 730 (three-point linkage) and Automation…
More in Off-Road, Special Vehicles & Machinery
All Off-Road, Special Vehicles & Machinery programmes → · How to apply · Fees & financing · Scholarships