Safe Bulldozer Operation Course
Online 300-hour course in safe bulldozer operation. 6 modules covering EN 474-2 (crawler tractors and bulldozers, safety), ISO 6747 (earth-moving tractors, terminology) and Trimble Earthworks. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the configuration of the bulldozer, blade and ripper.
Carry out pre-start checks and prepare the work.
Apply efficient pushing, spreading and ripping techniques.
Work safely on slopes, embankments and edges.
Prevent rollover and entrapment risks during operation.
Estimate hourly output and optimise the cycle.
Plan maintenance of the undercarriage and equipment.
Who it's for
- Bulldozer operator wishing to specialise in Safe Bulldozer Operation.
- Earthworks supervisor wishing to specialise in Safe Bulldozer Operation.
- Mine production manager wishing to specialise in Safe Bulldozer Operation.
- Undercarriage maintenance technician wishing to specialise in Safe Bulldozer Operation.
- Plant manager wishing to specialise in Safe Bulldozer Operation.
- Operator instructor wishing to specialise in Safe Bulldozer Operation.
- Engineering or science graduates seeking to enter civil works.
What you'll work with
- EN 474-2 (crawler tractors and bulldozers, safety)
- ISO 6747 (earth-moving tractors, terminology)
- ISO 9246 (bulldozer blade volume)
- ISO 3471 (roll-over protective structures ROPS)
- ISO 6683 (seat belts)
- Royal Decree 1215/1997 (work equipment)
6 modules · 300 h
1.1Types of crawler and wheeled tractor1.2Parts: undercarriage, blade, frame and ripper1.3Blade types: straight, universal, semi-universal and angle dozer1.4Blade tilt, pitch and angle1.5Hydrostatic and torque converter transmission1.6Controls, joystick and working modes1.7Undercarriage: shoes, rollers and tracks1.8Ripper and ripping1.9Ballasting, balance and centre of gravity1.10Workshop: identification of components and controls
2.1Pre-start inspection2.2Track tension and undercarriage condition2.3Levels, leaks and filters2.4Condition of blade, end bits and cutting edges2.5Brake, steering and light checks2.6Visibility, cameras and mirrors2.7Reading plans and setting out2.8Study of the terrain and material2.9Site organisation and work routes2.10Practice: pre-start checklist
3.1Pushing on surface and in trenches3.2Pushing with a full blade and load control3.3Clearing and grubbing the ground3.4Forming windrows and fills3.5Spreading in layers and thicknesses3.6Opening tracks and access roads3.7Trimming and levelling with the blade3.8Working with the ripper: depth and passes3.9Push distances and output3.10Practice: opening an access road and backfilling
4.1Slope limits by machine4.2Working uphill and downhill4.3Working across the slope: risks4.4Forming and trimming embankments4.5Cutting benches on hillsides4.6Landslides and signs of instability4.7Working near edges and crests4.8Escaping the machine in a rollover4.9Coordination with other machines on slopes4.10Practice: working procedure on a slope
5.1Main risks: rollover, run-over and falling material5.2Cab, guarding and seat belt5.3Blind spots and presence of pedestrians5.4Buried and overhead services5.5Night and dusty working conditions5.6Towing and recovery of machines5.7Transporting the machine on a low-loader5.8Parking, locking and secure storage5.9Response to incidents and emergencies5.10Practice: workstation risk assessment
6.1Calculating output per hour and per pass6.2Factors reducing performance6.3Efficient driving and fuel consumption6.4Undercarriage costs and how to extend them6.5Operator first-level maintenance6.6Early detection of fault symptoms6.7Hour meter and work record logging6.8Level control and guidance systems6.9Common mistakes of novice operators6.10Final project: planning and carrying out an excavation
How you'll learn
Fully 100% online training on the SEIUM Institute campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Trimble Earthworks, Topcon 3D-MC, advanced Excel, in free, academic or evaluation versions. Trials are studied using real procedures for earth pushing and spreading practice, controlled slope work and output measurement per cycle. Assessment is continuous by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the configuration of the bulldozer, blade and ripper.
Carry out pre-start checks and prepare the work.
Apply efficient pushing, spreading and ripping techniques.
Work safely on slopes, embankments and edges.
Prevent rollover and entrapment risks during operation.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with full-time work.
You will work with Trimble Earthworks, Topcon 3D-MC and advanced Excel. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM Institute diploma upon passing the continuous assessment and the integrating final project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Check the recognition policy when enrolling.
Related programmes
Course in Academic Operation of Nuclear Simulators
Online 300 h course in academic operation of nuclear simulators. 6 modules covering ANSI/ANS-3.5 (plant simulators for training and examination), 10 CFR 55.46 (simulators in operator…
Advanced simulation course with X-Plane
The Advanced Simulation Course with X-Plane offers an in-depth immersion into the world of flight simulation, using X-Plane software as the primary platform. Participants will learn…
Course in Ethics in Military Production Contracts
Online 300-hour Course in Ethics in Military Production Contracts. 6 modules covering the Arms Trade Treaty (2013), Council Common Position 2008/944/CFSP and SAP S/4HANA. Assigned tutor…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships