Postgraduate Diploma in Building Envelope and Thermal Bridges
Online 800-hour Postgraduate Diploma in Building Envelope and Thermal Bridges. 8 modules with ISO 10211 (thermal bridges, detailed calculation), ISO 13788 (hygrothermal behaviour) and THERM. Assigned tutor and enrolment open.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the heat transfer mechanisms in the building envelope.
Identify and classify the thermal bridges of a building.
Simulate thermal bridges in two and three dimensions.
Assess the risk of surface and interstitial condensation.
Select high-efficiency construction solutions.
Diagnose the building envelope with on-site testing.
Design the energy renovation of a building's envelope.
Who it's for
- Building envelope engineer who wishes to specialise in Building Envelope and Thermal Bridges.
- Building energy efficiency consultant who wishes to specialise in Building Envelope and Thermal Bridges.
- Energy certification technician who wishes to specialise in Building Envelope and Thermal Bridges.
- Energy renovation specialist who wishes to specialise in Building Envelope and Thermal Bridges.
- Passivhaus consultant who wishes to specialise in Building Envelope and Thermal Bridges.
- Building diagnostics technician who wishes to specialise in Building Envelope and Thermal Bridges.
- Graduates in engineering or science seeking to enter the building sector.
What you'll work with
- ISO 10211 (thermal bridges, detailed calculation)
- ISO 13788 (hygrothermal behaviour)
- CTE DB-HE (energy savings)
- ISO 6946 (thermal transmittance)
- ISO 14683 (thermal bridges, simplified methods)
- EN 15026 (moisture transfer, simulation)
- ISO 9869-1 (in situ measurement of thermal transmittance)
8 modules · 800 h
1.1Heat transmission by conduction, convection and radiation1.2Thermal conductivity and thermal resistance1.3Thermal transmittance of enclosures according to ISO 69461.4Thermal inertia and capacity1.5Moisture and vapour transfer1.6Behaviour of openings and glazing1.7Thermal transmittance of windows according to ISO 100771.8Infiltration and airtightness1.9CTE DB-HE requirements1.10Workshop: calculation of thermal transmittance of standard enclosures
2.1Typologies of thermal bridges2.2Linear thermal transmittance ψ and point transmittance χ2.3Standard UNE-EN ISO 102112.4Catalogues and atlases of thermal bridges2.5Floor slab and pillar edges2.6Junctions with window frames2.7Balconies and cantilevers2.8Surface temperature factor fRsi2.9Risk of mould and surface condensation2.10Practice: calculation of ψ for a floor slab edge with THERM
3.1Finite element and finite difference methods3.2Tools: THERM, Flixo and HEAT3.3Standardised boundary conditions3.4Meshing and validation3.5Modelling heterogeneous materials3.6Validation cases from ISO 102113.73D analysis of corners and anchors3.8Interpretation of isotherms3.9Results reporting3.10Laboratory: 3D model of a ventilated façade anchor
4.1Glaser method according to ISO 137884.2Dynamic hygrothermal simulation with WUFI4.3Standard EN 150264.4Vapour barriers and retarders4.5Interstitial condensation4.6Construction moisture and drying4.7Moisture-related pathologies4.8Internal insulation and its risks4.9Renovation of historic walls4.10Practice: WUFI analysis of internal insulation
5.1ETICS and SATE systems5.2Ventilated façades5.3Cavity wall insulation5.4Flat and pitched roofs5.5Ground-bearing slabs and sanitary floors5.6Thermal bridge breaks in balconies5.7High-performance window frames5.8Insulation materials and their behaviour5.9Passivhaus standard and thermal bridge-free details5.10Case study: construction detail of window-to-ETICS junction
6.1Infrared thermography according to EN 131876.2In situ measurement of thermal transmittance according to ISO 98696.3Blower Door airtightness test according to ISO 99726.4Infiltration detection6.5Measurement of moisture in materials6.6Pathology inspection6.7Hygrothermal monitoring6.8Interpretation of results6.9Diagnostic reports6.10Practice: interpretation of a façade thermogram
7.1Building envelope renovation strategies7.2Intervention priorities7.3Calculation of energy savings7.4Energy certification with CE3X and HULC7.5Energy renovation grants7.6Cost-optimal analysis7.7Compatibility with heritage protection7.8Building renovation passport7.9On-site quality control7.10Case study: renovation proposal for a residential block
8.1Analysis of the building under study8.2Building envelope diagnosis8.3Identification of thermal bridges8.4Numerical modelling of critical junctions8.5Hygrothermal analysis8.6Proposal of construction solutions8.7Energy and economic evaluation8.8Detail drawings8.9Report and presentation8.10Final review with the tutor
How you'll learn
Fully 100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is THERM, WUFI, Flixo, HERMES / CE3X, DesignBuilder, in free, academic or evaluation versions. Tests are studied using real procedures for infrared thermography of façades, in situ measurement of transmittance and air-tightness testing (blower door). Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Understand the heat transfer mechanisms in the building envelope.
Identify and classify the thermal bridges of a building.
Simulate thermal bridges in two and three dimensions.
Assess the risk of surface and interstitial condensation.
Select high-efficiency construction solutions.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The programme works with THERM, WUFI, Flixo, HERMES / CE3X, DesignBuilder. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Check the credit transfer policy when you enrol.
Related programmes
Postgraduate Diploma in Grid Codes and Compliance Testing
Online Postgraduate Diploma of 800 hours in Grid Codes and Compliance Testing. 8 modules covering Regulation (EU) 2016/631 (Requirements for Generators, RfG), Regulation (EU) 2016/1388 (Demand…
Postgraduate Diploma in Portfolio Optimisation and Compliance
Online 800-hour Postgraduate Diploma in Portfolio Optimisation and Compliance. 8 modules covering Regulation (EU) No 1227/2011 (REMIT), Regulation (EU) 2024/1106 (REMIT revision) and Python (pandas, PyPortfolioOpt).…
Postgraduate Diploma in Heat Recovery and Industrial Integration
Online 800-hour Postgraduate Diploma in Heat Recovery and Industrial Integration. 8 modules covering ISO 50001 (energy management systems), EN 16247-3 (process energy audits) and Aspen HYSYS.…
More in Energy and Networks
All Energy and Networks programmes → · How to apply · Fees & financing · Scholarships