Master’s in Route Engineering: Alignment with Regional Audits.
Online master's programme of 1,900 hours in route-to-market engineering: alignment with audits by region. 12 modules covering regional audit ecosystems, multi-region requirements, type-approval and factory audits in the EU, North America and Asia-Pacific, accreditation schemes, management systems, evidence and audit programmes, with an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the authorities and audit schemes in each region.
Build requirements matrices with regional variants.
Prepare the organisation for type-approval and management system audits.
Interpret accreditation scopes and mutual recognition arrangements.
Manage technical evidence with full traceability.
Plan risk-based audit programmes.
Close findings through effective root cause analysis.
Who it's for
- Global type-approval managers.
- Management system auditors.
- Regulatory compliance coordinators.
- Regulatory affairs specialists.
- Supplier quality managers.
- International certification consultants.
- Engineering or science graduates seeking to enter the automotive sector.
What you'll work with
- ISO 19011 (guidelines for auditing management systems)
- ISO/IEC 17065 (bodies certifying products)
- Regulation (EU) 2018/858 (EU vehicle type-approval framework)
- ISO/IEC 17025 (competence of testing and calibration laboratories)
- ISO/IEC 17020 (inspection bodies)
- IATF 16949 (automotive quality management)
- ISO 9001 (quality management systems)
- AS9100 (aerospace quality management)
- Intelex
- SAP Audit Management
- Polarion ALM
- Microsoft Power BI
12 modules · 1900 h
1.1Types of audit: first, second and third party1.2Approval authorities and technical services1.3Notified bodies and their designation in the EU1.4Federal agencies and self-certification in the US1.5Mandatory CCC, KC and BIS schemes1.6Differences between product and system audits1.7Life cycle of a certification route1.8Risks of misalignment between regions1.9Indicators of an organisation's audit maturity1.10Case study: audit map of a global manufacturer
2.1Extracting requirements from regulatory texts2.2Equivalence matrices between regulations2.3Managing common and divergent requirements2.4A single requirements base with regional variants2.5Version control of applicable standards2.6Regulatory monitoring and amendment alerts2.7Prioritisation by schedule impact2.8Audit requirements implicit in regulations2.9Assigning owners to each requirement2.10Workshop: requirements matrix for three markets
3.1Initial assessment under Regulation (EU) 2018/8583.2Conformity of production audit3.3Supervision of designated technical services3.4Market surveillance and compliance verification3.5Audits by the Forum for Exchange of Information on Enforcement3.6Manufacturer documentation and technical file3.7CSMS and SUMS cybersecurity audits3.8Notified body audits in the railway sector3.9Managing non-conformities with the authority3.10Case study: preparing for a CoP audit
4.1FMVSS self-certification and responding to NHTSA4.2EPA and CARB compliance audits4.3FAA inspections of PMA holders4.4Transport Canada programmes and CMVSS4.5NOM requirements and verification in Mexico4.6Records, document retention and litigation4.7Supplier audits under North American practice4.8Defect investigations and compliance4.9Formal communication with federal agencies4.10Practical exercise: checklist for an EPA inspection
5.1CCC certification and factory inspection in China5.2MIIT audits and annual follow-up5.3Japanese type approval and MLIT audits5.4KC certification and KMVSS self-certification5.5The AIS scheme and ARAI audits in India5.6ADR and RVSS requirements in Australia5.7Managing languages and certified translations5.8Timescales and cultural particularities in audits5.9Coordination with local representatives5.10Case study: a CCC factory audit
6.1ISO/IEC 17020 for inspection bodies6.2ISO/IEC 17025 for testing laboratories6.3ISO/IEC 17065 for product certification6.4ISO/IEC 17021-1 for management system certification6.5ILAC and IAF mutual recognition arrangements6.6The role of ENAC and national accreditation bodies6.7Accreditation scopes and how to read them critically6.8Witnessing and on-site assessments6.9Cross-border validity of test reports6.10Workshop: analysis of accreditation scopes
7.1ISO 9001 requirements applied to type approval7.2IATF 16949 and customer-specific requirements7.3AS9100 in the aerospace sector7.4Integration with ISO 14001 and ISO 450017.5Procedures for controlling regulatory changes7.6Document management and controlled records7.7Competence of audited personnel7.8Internal audits according to ISO 190117.9Compliance-focused management review7.10Practical exercise: simulated internal process audit
8.1What constitutes valid objective evidence8.2Traceability from requirements to tests8.3Technical files and information documents8.4Signing, stamping and control of reports8.5Data integrity and ALCOA+ principles8.6Managing digital evidence in PLM8.7Retention and archiving by jurisdiction8.8Sampling and representativeness of evidence8.9Preparing audit rooms8.10Lab: evidence package for an auditor
9.1Integrated calendar of global audits9.2Risk analysis to prioritise audits9.3Resources, budget and audit logistics9.4Remote audits and hybrid techniques9.5Combined and integrated audits9.6Coordinating audits of critical suppliers9.7Managing external auditors and escorts9.8Advance preparation: pre-audits and mock audits9.9Programme performance metrics9.10Workshop: annual programme for five regions
10.1Classifying major and minor findings10.2Root cause analysis with 8D10.3Ishikawa and the five whys in compliance10.4Corrective and preventive action plans10.5Verifying the effectiveness of actions10.6Response deadlines required by authorities10.7Escalation and communication with senior management10.8Lessons learned across regions10.9Impact of findings on current certificates10.10Case study: closing a major non-conformity
11.1Organisational model of the regulatory function11.2Compliance committees and escalation11.3Audit status dashboards11.4Benchmarking between plants and regions11.5Digitalisation of the audit cycle11.6Regulatory knowledge management11.7Outsourcing versus in-house capability11.8Ethics and independence in auditing11.9Continuous improvement roadmap11.10Practical exercise: global compliance dashboard
12.1Selecting the product and target markets12.2Diagnosis of the current audit status12.3Designing the region-aligned route12.4Requirements and evidence matrix12.5Proposed audit programme12.6Risk and contingency analysis12.7Monitoring indicators12.8Validation with a real or simulated case12.9Master's Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
100% online learning on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, making it compatible with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Intelex, SAP Audit Management, Polarion ALM and Microsoft Power BI, in free, academic or evaluation versions. Practical work is based on real procedures: conformity of production audits, factory inspections for mandatory certification and internal management system audits. Assessment is continuous for each module, plus the final Master's Thesis.
Standards covered: ISO 19011, ISO/IEC 17065, Regulation (EU) 2018/858, ISO/IEC 17025, ISO/IEC 17020, IATF 16949, ISO 9001 and AS9100.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- A university degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Intelex, SAP Audit Management, Polarion ALM and Microsoft Power BI, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Active/Passive Safety Engineering, ADAS & Autonomous Vehicles
Online master's programme of 1,900 hours in active and passive safety, ADAS and autonomous vehicle engineering, structured in 12 modules covering impact biomechanics, crashworthiness, restraint systems,…
Master’s in Marine Certification Engineering
Online master's programme of 1,900 hours in maritime certification engineering, structured in 12 modules covering the maritime certification framework, ship classification, structure and stability, fire safety…
Master’s in Regional Routes for Interoperability and Incentives Engineering
Online master's programme of 1,900 hours in regional route engineering for e-mobility interoperability and incentives. 12 modules covering Regulation (EU) 2023/1804 AFIR, 23 CFR Part 680…
More in Regulation, Safety, RAMS & Homologation
All Regulation, Safety, RAMS & Homologation programmes → · How to apply · Fees & financing · Scholarships