Master’s in Engineering of EURO/OBD, EPA/CARB, BS-VI India, evaporative, GHG/CO₂, noise; VECTO/WLTP/FTP.
Online master's programme of 1,900 hours in vehicle emissions and noise homologation (EURO/OBD, EPA/CARB, BS-VI India, evaporative emissions, GHG/CO₂, noise; VECTO/WLTP/FTP): 12 modules covering Euro, US, Indian and Chinese regulations, WLTP, FTP and RDE testing, OBD, evaporative emissions, CO2 and VECTO, vehicle noise and aftertreatment calibration, with an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Interpret Euro, EPA, CARB, BS-VI and China 6 requirements.
Plan WLTP, FTP and RDE tests rigorously.
Design OBD strategies that comply with each region.
Assess evaporative emissions and their control systems.
Calculate heavy-duty vehicle CO2 emissions with VECTO.
Apply vehicle noise regulations.
Draw up multi-region emissions homologation plans.
Who it's for
- Emissions homologation engineers handling type approval in several markets.
- Engine calibration engineers who need a firm grasp of the regulatory limits they calibrate to.
- OBD specialists working on diagnostic strategies for Europe, the USA or Asia.
- Emissions laboratory technicians looking to move into homologation or certification.
- Vehicle acoustics engineers dealing with pass-by noise and AVAS requirements.
- CO2 compliance analysts managing fleet targets, pooling or VECTO declarations.
- Engineering or science graduates looking to enter the automotive sector.
What you'll work with
- Regulation (EU) 2017/1151 (light-vehicle emissions type approval, WLTP)
- UN GTR 15 (Worldwide harmonised Light vehicles Test Procedure)
- 13 CCR 1968.2 (CARB OBD-II requirements)
- Regulation (EU) 2024/1257 (Euro 7 type approval)
- Regulation (EU) 2019/1242 (CO2 emission standards for heavy-duty vehicles)
- Regulation (EU) 540/2014 (sound level of motor vehicles)
- 40 CFR Part 86 (US EPA emissions control for new vehicles and engines)
- UN Regulation No. 51 (noise emissions of motor vehicles)
- VECTO
- AVL CONCERTO
- HORIBA STARS
- ETAS INCA
- MATLAB
12 modules · 1900 h
1.1Formation of CO, HC and NOx in engines1.2Particulates: mass, number and composition1.3Air-fuel ratio and lambda1.4Cold-start emissions1.5N2O, CH4 and NH3 in aftertreatment1.6CO2 and fuel consumption1.7Non-exhaust emissions1.8Catalyst chemistry1.9Influence of fuel on emissions1.10Case study: emissions balance of an engine
2.1Evolution from Euro 1 to Euro 72.2Regulation (EU) 2017/1151 for passenger cars2.3Euro VI for heavy-duty vehicles2.4Type I to Type VI tests2.5EOBD on-board diagnostics2.6OBD thresholds and monitors2.7IUPR and diagnostic effectiveness2.8Euro 7: brakes, tyres and batteries2.9In-service conformity2.10Workshop: interpreting a Type I test report
3.1The Clean Air Act and federal powers3.2EPA Tier 3 and fleet standards3.3CARB LEV III, LEV IV and ACC II3.4OBD-II under 13 CCR 1968.23.5Certification by test group3.6Durability and useful life3.7Exemptions and the California waiver3.8EPA GHG standards and NHTSA CAFE3.9Zero-emission vehicle programmes3.10Case study: EPA certificate application
4.1Bharat Stage VI and the transition from BS-IV4.2Indian OBD-II and local RDE4.3ARAI and ICAT testing4.4China 6a and 6b4.5GB 18352.6 and GB 17691 standards4.6Remote monitoring of heavy-duty vehicles in China4.7CAFC and NEV credits4.8Differences in cycles and fuels4.9Implementation timelines4.10Practical exercise: comparison of BS-VI and China 6
5.1The WLTP procedure and GTR 155.2Vehicle classes and speeds5.3Road load and coastdown5.4ATCT temperature corrections5.5FTP-75 and the US06 and SC03 cycles5.6HWFET and the EPA fuel economy label5.7NEDC and its replacement5.8Testing hybrid and electric vehicles5.9Uncertainty in fuel consumption measurements5.10Lab: analysis of a coastdown curve
6.1The RDE procedure and PEMS6.2RDE boundary conditions6.3Conformity factors6.4Evaluation with moving averaging windows (MAW)6.5ISC testing for heavy-duty vehicles6.6Remote sensing of emissions6.7Laboratory versus on-road comparison6.8Detection of auxiliary emission strategies6.9Euro 7 and new RDE limits6.10Workshop: evaluation of an RDE trip
7.1Sources: diurnal, hot soak and refuelling7.2The European SHED test7.3EPA evaporative tests7.4Canister and purge systems7.5ORVR and refuelling emissions7.6Evaporative leak diagnostics7.7Material permeation7.8Hybrid vehicles with pressurised tanks7.9Requirements in China and India7.10Case study: diagnosis of a 0.5 mm leak
8.1Regulation (EU) 2019/631 for passenger cars8.2Regulation (EU) 2019/1242 for heavy-duty vehicles8.3The VECTO simulation tool8.4Component certification for VECTO8.5Eco-innovations and credits8.6EPA Phase 3 GHG for heavy-duty vehicles8.7The EPA GEM tool8.8Pooling and compliance strategies8.9OBFCM real-world fuel consumption monitoring8.10Lab: VECTO simulation of a truck
9.1UN Regulation No. 519.2Regulation (EU) 540/20149.3Tyre noise and UN Regulation 1179.4Additional sound emission provisions (ASEP)9.5AVAS and UN Regulation 1389.6Motorcycle noise and UN Regulation 419.7Noise regulations in the USA9.8ISO 10844 test tracks9.9Design mitigation measures9.10Practical exercise: calculating the pass-by noise level
10.1Three-way catalysts10.2DPF and GPF10.3SCR with urea and AdBlue10.4Lean NOx trap (LNT)10.5ECU calibration for emissions10.6Thermal management of aftertreatment10.7Catalyst efficiency diagnostics10.8Accelerated catalyst ageing10.9Robustness and production variability10.10Case study: calibration of DPF regeneration
11.1Multi-region test plan11.2Reuse of data across markets11.3Emissions families and parent vehicles11.4Change management and extensions11.5Communication with authorities and technical services11.6Reference fuels by region11.7Laboratory costs and planning11.8Risks of non-conformity11.9Preparing for Euro 7 and future standards11.10Workshop: global homologation plan for an engine
12.1Selection of a vehicle or engine12.2Analysis of requirements by region12.3Emissions test planning12.4OBD and evaporative strategy12.5CO2 calculation and simulation12.6Noise assessment12.7Integrated compliance plan12.8Risk and cost analysis12.9Master's Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
The programme is delivered 100% online on SEIUM's campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is VECTO, AVL CONCERTO, HORIBA STARS, ETAS INCA and MATLAB, in free, academic or evaluation versions. Testing is studied through real procedures: WLTP chassis dynamometer tests, RDE trips with PEMS equipment and evaporative tests in a SHED chamber. Assessment is continuous, module by module, plus the final Master's Thesis.
Standards covered: Regulation (EU) 2017/1151, UN GTR 15, 13 CCR 1968.2, Regulation (EU) 2024/1257, Regulation (EU) 2019/1242, Regulation (EU) 540/2014, 40 CFR Part 86, UN Regulation No. 51.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- A university degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- An internet connection and a computer capable of running the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with VECTO, AVL CONCERTO, HORIBA STARS, ETAS INCA and MATLAB, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the programme's software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Engineering of Ethical Frameworks, Social Impact, Public Participation and International Transparency.
Online master's programme of 1,900 hours in ethical frameworks, social impact, public participation and international transparency engineering. 12 modules covering international ethical frameworks, social impact assessment,…
Master’s in EU Interoperability Engineering, National Homologation, RAMS EN 50126/8/9.
Online master's programme of 1,900 hours in EU interoperability engineering, national authorisation and RAMS to EN 50126/8/9. 12 modules covering EC verification, national vehicle authorisation, the…
Master’s in Multisector RAMS, Reliability and Compliance Engineering
Online master's programme of 1,900 hours in RAMS, reliability and multi-sector conformity engineering. 12 modules covering applied reliability, life data analysis, failure analysis techniques, cross-sector functional…
More in Regulation, Safety, RAMS & Homologation
All Regulation, Safety, RAMS & Homologation programmes → · How to apply · Fees & financing · Scholarships