Apply now
CourseEnergy and Networks Applications open

Course in Power Quality Management in Low Voltage

Online 300-hour course in power quality management in low voltage. 6 modules covering EN 50160 (characteristics of the supplied voltage), IEC 61000-4-30 (power quality measurement methods) and Fluke Energy Analyze Plus. Dedicated tutor and open enrolment.

Duration300 h
ModeOnline
Start datesSet by the faculty
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor
Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Identify and classify power quality disturbances in low-voltage networks.

02

Plan measurement campaigns using analysers compliant with IEC 61000-4-30.

03

Interpret records of dips, flicker, unbalance and harmonics.

04

Diagnose the origin of supply quality problems.

05

Select technically and economically viable mitigation solutions.

06

Apply the limits and regulatory responsibilities for quality of service.

07

Prepare a power quality management plan for an installation.

Profile

Who it's for

  • Power quality engineer wishing to specialise in Power Quality Management in Low Voltage.
  • Electrical measurement technician wishing to specialise in Power Quality Management in Low Voltage.
  • Electrical maintenance manager wishing to specialise in Power Quality Management in Low Voltage.
  • Distribution engineer wishing to specialise in Power Quality Management in Low Voltage.
  • Energy efficiency consultant wishing to specialise in Power Quality Management in Low Voltage.
  • Electrical installation auditor wishing to specialise in Power Quality Management in Low Voltage.
  • Engineering or science graduates looking to enter industry.
Standards & tools

What you'll work with

  • EN 50160 (characteristics of the supplied voltage)
  • IEC 61000-4-30 (power quality measurement methods)
  • IEEE 1159 (power quality monitoring)
  • IEC 61000-4-7 (measurement of harmonics and interharmonics)
  • IEC 61000-4-15 (flickermeter)
  • IEC 61000-2-2 (compatibility levels in low-voltage networks)
  • IEC 61000-3-2 (limits for harmonic current emissions)
  • Royal Decree 1955/2000 (quality of service)
Syllabus

6 modules · 300 h

  1. 1.1Slow voltage variations
  2. 1.2Dips and short interruptions
  3. 1.3Switching transient overvoltages
  4. 1.4Flicker and fluctuations
  5. 1.5Voltage unbalance
  6. 1.6Harmonics and interharmonics
  7. 1.7Frequency variations
  8. 1.8Network signalling
  9. 1.9Costs of poor quality
  10. 1.10Case study: production stoppages caused by dips
  1. 2.1Class A analysers
  2. 2.2IEC 61000-4-30 methods
  3. 2.3Harmonic measurement according to IEC 61000-4-7
  4. 2.4Flickermeter according to IEC 61000-4-15
  5. 2.5Location of measurement points
  6. 2.6Temporary measurement campaigns
  7. 2.7Permanent monitoring at main distribution boards
  8. 2.8Weekly statistical indices
  9. 2.9EN 50160 compliance reports
  10. 2.10Workshop: measurement campaign with a portable analyser
  1. 3.1Identification of disturbance sources
  2. 3.2Non-linear loads in buildings
  3. 3.3Resonances with capacitors
  4. 3.4Neutral conductor overload
  5. 3.5Earthing problems
  6. 3.6Equipment susceptibility
  7. 3.7ITIC and SEMI F47 curves
  8. 3.8Root cause analysis
  9. 3.9Responsibility between customer and distributor
  10. 3.10Practice: diagnosis from real records
  1. 4.1Uninterruptible power supplies
  2. 4.2Dynamic voltage restorers
  3. 4.3Voltage stabilisers
  4. 4.4Reactive power compensation
  5. 4.5Balancing single-phase loads
  6. 4.6Isolation transformers
  7. 4.7Surge protection
  8. 4.8Neutral and earth design
  9. 4.9Selection of immune equipment
  10. 4.10Case study: solution for a data centre
  1. 5.1Electromagnetic compatibility levels
  2. 5.2Equipment emission limits
  3. 5.3Regulated quality of service
  4. 5.4Complaints and compensation
  5. 5.5Supply quality contracts
  6. 5.6Power quality management plan
  7. 5.7Power quality in energy audits
  8. 5.8Training of maintenance staff
  9. 5.9Monitoring indicators
  10. 5.10Laboratory: simulation of a dip and its mitigation
  1. 6.1Description of the installation
  2. 6.2Measurement plan
  3. 6.3Record analysis
  4. 6.4Diagnosis of disturbances
  5. 6.5Selection of solutions
  6. 6.6Techno-economic evaluation of solutions
  7. 6.7Monitoring plan
  8. 6.8Conclusions and action plan
  9. 6.9Report and presentation
  10. 6.10Final review with the tutor
Methodology, software & labs

How you'll learn

Training 100 % online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is Fluke Energy Analyze Plus, PQView, Dranetz Dran-View, MATLAB/Simulink, ETAP, in free, academic or evaluation versions. Tests are studied using real measurement campaign procedures with class A analysers, diagnosis of dips and overvoltages, and assessment of compliance with EN 50160. Assessment is continuous, module by module, plus the final integrating project.

Accreditable laboratories(EN ISO/IEC 17025) with rotor test bench, EMC/Lightning pre-compliance, HIL/SIL, vibration/acoustics.
Evidence-oriented final project:safety case, test plan, compliance dossier and operating limits.
Industry mentoring:lecturers with experience in training, , eVTOL/UAM and flight test.
Flexible format(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:safety-by-design approach, OT cybersecurity, DIH and compliance as pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Description of the installation

Identify and classify power quality disturbances in low-voltage networks.

Measurement plan

Plan measurement campaigns using analysers compliant with IEC 61000-4-30.

Record analysis

Interpret records of dips, flicker, unbalance and harmonics.

Diagnosis of disturbances

Diagnose the origin of supply quality problems.

Selection of solutions

Select technically and economically viable mitigation solutions.

Career opportunities

Where this takes you

Power quality engineerElectrical measurement technicianElectrical maintenance managerDistribution engineerEnergy efficiency consultantElectrical installation auditor
Admissions & scholarships

Requirements

  • No prior degree required.
  • Internet connection and a computer capable of running the programme’s software.
  • Sufficient Spanish to follow technical standards documentation.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme comprises 300 hours in total, spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with full-time work.

The programme uses Fluke Energy Analyze Plus, PQView, Dranetz Dran-View, MATLAB/Simulink and ETAP. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.

A SEIUM own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.

Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the higher programme. Check the recognition policy when you enrol.

Keep exploring

Related programmes

See all in Energy and Networks
Course610 $

Multi-terminal and Offshore Links Course

Online course of 300 h in multi-terminal and offshore links. 6 modules covering Regulation (EU) 2016/1447 (HVDC), IEC 62747 and PSCAD. Assigned tutor and open enrolment.

300 hOnlineEnergy and Networks
Course500 $

Course in NATO Standards for Heavy Mobility

300-hour online course in NATO standards for heavy mobility. 6 modules with STANAG 2021 (military load classification, MLC), MIL-STD-1366 (transportability criteria) and AutoTURN. Assigned tutor and…

300 hOnlineDefense, Military Engineering & Land Systems
Course890 $

Course in Ethics in Military Energy Autonomy

Online 300-hour course in ethics in military energy autonomy. 6 modules covering ISO 50001:2018 (energy management), Directive (EU) 2023/1791 (energy efficiency) and HOMER Pro. Assigned tutor…

300 hOnlineAutomotive & Motorsport
Course in Power Quality Management in Low VoltageEnrol
Related programmes

More in Energy and Networks

Course in Regulation in Critical Software CertificationView programme →Course in Blackout Resilience StrategiesView programme →Course on Reduction of Technical and Non-Technical LossesView programme →Course in Smart Buildings and BEMSView programme →Course in Aviation Insurance Loss AdjustingView programme →Grid-forming in Energy Storage Systems CourseView programme →

All Energy and Networks programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.