Course in Long-Term Storage of Classic Engines
Online 300-hour course in long-term storage of classic engines. 6 modules covering MIL-PRF-21260 (engine preservation oils), MIL-PRF-16173 (corrosion-preventive compounds) and advanced Excel. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the deterioration mechanisms of a stored engine.
Apply internal preservation treatments to cylinders and circuits.
Protect the engine externally against corrosion and dirt.
Define the appropriate environmental conditions for the storage facility.
Establish a schedule of periodic inspections during storage.
Reactivate a stored engine using a safe procedure.
Document the storage process in a final project.
Who it's for
- Classic engine mechanic who wants to specialise in Long-Term Storage of Classic Engines.
- Vehicle preservation technician who wants to specialise in Long-Term Storage of Classic Engines.
- Engine storage manager who wants to specialise in Long-Term Storage of Classic Engines.
- Vintage engine restorer who wants to specialise in Long-Term Storage of Classic Engines.
- Preventive maintenance technician who wants to specialise in Long-Term Storage of Classic Engines.
- Curator of technical collections who wants to specialise in Long-Term Storage of Classic Engines.
- Engineering or science graduates looking to enter classic vehicle restoration.
What you'll work with
- MIL-PRF-21260 (engine preservation oils)
- MIL-PRF-16173 (corrosion-preventive compounds)
- ISO 9223 (atmospheric corrosivity)
- SAE J300 (engine oil viscosity classification)
- ASTM D525 (oxidation stability of gasoline)
- EN 228 (unleaded petrol)
6 modules · 300 h
1.1Assembled engine and dismantled engine1.2Reasons for long-term storage1.3Damage that appears over time1.4Internal corrosion and its origin1.5Humidity, condensation and engine breathing1.6Expected duration and its effect on the method1.7Documenting the condition at storage1.8Engine identification and numbering1.9Minimum space and conditions1.10Workshop: storage plan for an engine
2.1Draining or preserving the oil2.2Oils and protective fluids2.3Fogging of cylinders2.4Protection of valves and seats2.5Cooling circuit: draining or antifreeze2.6Carburettors and fuel residue2.7Sealing of intake and exhaust2.8Position of the crankshaft and valves2.9Periodic turning: pros and cons2.10Practice: internal preparation protocol
3.1Cleaning and degreasing3.2Protection of machined surfaces3.3Waxes and volatile corrosion inhibitors3.4Plugs and blanking flanges3.5Protection of the electrical system3.6Packaging and protective film3.7Desiccant bags3.8Pallet, stand and fastening3.9Labelling the assembly3.10Practice: external preparation and packaging
4.1Temperature and relative humidity4.2Ventilation and condensation4.3Floor and supports4.4Stacking and safety4.5Protection against rodents4.6Protection against dust4.7Fire risk4.8Monitoring and recording conditions4.9Inventory and location4.10Practice: designing an engine storage facility
5.1Periodic inspections and their content5.2Checking desiccants5.3Checking for leaks and stains5.4Documented periodic turning5.5Monitoring photography5.6Early detection of corrosion5.7Response to an anomaly5.8Record for each unit5.9Person responsible for monitoring5.10Practice: monitoring schedule
6.1Inspection before assembly6.2Checking turning and compression6.3Replacing gaskets and seals6.4Pre-start lubrication6.5Bench testing where possible6.6Refitting to the vehicle6.7Running-in afterwards6.8Common errors and lost engines6.9Documented real cases6.10Final project: storage and reactivation file for an engine
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is advanced Excel, Testo Saveris, Airtable, Fusion 360, in free, academic or evaluation versions. Tests are studied using real internal preservation procedures with preservation oil, endoscopic inspection of cylinders and control of storage humidity. Assessment is continuous across each module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Identify the deterioration mechanisms of a stored engine.
Apply internal preservation treatments to cylinders and circuits.
Protect the engine externally against corrosion and dirt.
Define the appropriate environmental conditions for the storage facility.
Establish a schedule of periodic inspections during storage.
Where this takes you
Requirements
- No prior qualifications are required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory reading.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You work with advanced Excel, Testo Saveris, Airtable and Fusion 360. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own certificate upon passing the continuous assessment and the integrating project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the higher-level programme. Please check the credit transfer policy when you enrol.
Related programmes
Cultural Tourism and Historic Motoring Course
Online 300-hour course in cultural tourism and historic motoring. 6 modules covering the UNWTO Global Code of Ethics for Tourism (1999), Directive (EU) 2015/2302 (package travel)…
Surface Preparation for Nitro Paint Course
Online 300-hour course in surface preparation for nitro paint. 6 modules covering ISO 8501-1 (preparation grades of steel), ISO 8503-1 (roughness of blast-cleaned surfaces) and advanced…
Historic Vehicle Photography for Sale Course
Online 300-hour course in photographing historic vehicles for sale. 6 modules covering Law 3/1991 (Unfair Competition), Directive 2005/29/EC (unfair commercial practices) and Adobe Lightroom Classic. Tutor…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships