Block-Building in Naval Construction Course
Online 300 h course in block-building in naval construction. 6 modules covering IACS Recommendation 47 Shipbuilding and Repair Quality Standard, Resolution MSC.215(82) Performance Standard for Protective Coatings (PSPC) and AVEVA Marine Hull. Dedicated tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Apply the principles of block and zone-based integrated construction.
Divide a hull into blocks according to crane capacity and construction strategy.
Prepare the production information for a block from the 3D model.
Plan the fabrication of panels and sub-assemblies with distortion control.
Maximise outfitting and painting at block stage.
Organise erection and dimensional control in dock.
Develop the block-building strategy for a complete vessel.
Who it's for
- Naval production engineer wishing to specialise in Block-Building in Naval Construction.
- Block shop supervisor wishing to specialise in Block-Building in Naval Construction.
- Outfitting engineer wishing to specialise in Block-Building in Naval Construction.
- Dimensional control technician wishing to specialise in Block-Building in Naval Construction.
- Erection planner wishing to specialise in Block-Building in Naval Construction.
- Welding process engineer wishing to specialise in Block-Building in Naval Construction.
- Graduates in engineering or science seeking to join shipyards.
What you'll work with
- IACS Recommendation 47 Shipbuilding and Repair Quality Standard
- Resolution MSC.215(82) Performance Standard for Protective Coatings (PSPC)
- ISO 5817 Quality levels for fusion-welded joints in steel
- ISO 8501-1 Preparation of steel substrates before application of paints
- ISO 15614-1 Specification and qualification of welding procedures
- ISO 9606-1 Qualification testing of welders. Steels
- Classification society rules for steel hull construction
6 modules · 300 h
1.1Evolution of the block construction method1.2Group technology and product-oriented breakdown1.3Division of the hull into blocks and rings1.4Block size and weight criteria1.5Flat, curved and volumetric blocks1.6Megablocks and tandem construction1.7Crane capacity and transport means1.8Zone-based construction strategy1.9Advantages in schedule, quality and safety1.10Case study: block division of a bulk carrier
2.13D model and block breakdown2.2Shop drawings and parts lists2.3Nesting and numerically controlled cutting2.4Margins and shrinkage compensation2.5Block assembly sequence2.6Turning for welding in the flat position2.7Lifting lugs and temporary reinforcements2.8Production information in the model2.9Weight and centre of gravity control2.10Laboratory: assembly sequence of a double bottom
3.1Flat panel lines3.2Single-side submerged arc welding3.3Robotic assembly of stiffeners3.4Curved panels and heat forming3.5Sub-assemblies and mini-blocks3.6Weld distortion control3.7Thermal straightening of panels3.8Templates and pin tables3.9Dimensional inspection of panels3.10Workshop: distortion control on panels
4.1Early outfitting in block4.2Pipes, supports and ducts4.3Foundations and equipment in block4.4Trays and early cabling4.5Painting in block booths4.6PSPC standard for ballast tanks4.7Protection of painted surfaces4.8Logistics of components to the block4.9Outfitting index4.10Practice: outfitting of an engine room block
5.1Erection sequence in dock5.2Starting block and propagation5.3Alignment with total station5.43D laser scanning of blocks5.5Closure joints and margin cutting5.6Welding of joints in dock5.7Hull deflection and alignment control5.8Transport and lifting of blocks5.9Safety in heavy lifts5.10Case study: ring erection on a ferry
6.1Vessel selection6.2Block division6.3Engineering of a typical block6.4Fabrication plan6.5Outfitting plan6.6Erection sequence6.7Dimensional control of blocks6.8Schedule analysis6.9Report and presentation6.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is AVEVA Marine Hull, NAPA Steel, ShipConstructor, Cadmatic, Leica Cyclone, in free, academic or evaluation versions. Case studies are based on real block-division procedures for a merchant vessel, outfitting planning for a block, and dimensional control of blocks with a laser scanner. Assessment is continuous by module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Apply the principles of block and zone-based integrated construction.
Divide a hull into blocks according to crane capacity and construction strategy.
Prepare the production information for a block from the 3D model.
Plan the fabrication of panels and sub-assemblies with distortion control.
Maximise outfitting and painting at block stage.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards reading.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours, spread over 3 to 5 months. That is between 10 and 15 hours a week on average, compatible with a full-time job.
The course works with AVEVA Marine Hull, NAPA Steel, ShipConstructor, Cadmatic, Leica Cyclone. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official Ministry qualification.
Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Marine Propeller Cavitation Course
Online 300-hour course on marine propeller cavitation. 6 modules covering ITTC 7.5-02-03-03.1 Model-Scale Cavitation Test, ITTC 7.5-02-03-03.3 Cavitation Induced Pressure Fluctuations Model Scale Experiments and Simcenter…
Static and Dynamic Ship Stability Course
Online 300-hour course in static and dynamic ship stability. 6 modules covering the International Code on Intact Stability 2008 (IS Code 2008), SOLAS Convention, Chapter II-1…
Course in Ship Manoeuvrability in Restricted Ports
Online 300 h course in ship manoeuvrability in restricted ports. 6 modules with IMO Resolution MSC.137(76) Standards for Ship Manoeuvrability, PIANC Report nº 121 Harbour Approaches…
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships