SCR and NOx Reduction Systems Course
Online 300 h course in SCR and NOx reduction systems. 6 modules covering MARPOL Annex VI, Regulation 13 (nitrogen oxides), the 2008 NOx Technical Code (IMO) and Ansys Fluent. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the NOx formation mechanisms in marine diesel and gas engines.
Compare primary and secondary NOx reduction measures.
Size an SCR reactor and its urea dosing system.
Integrate an SCR system into newbuild and existing ships.
Apply the NOx Technical Code and the Tier III certification schemes.
Diagnose faults and ammonia leaks in systems in service.
Evaluate the costs and benefits of compliance alternatives in ECA zones.
Who it's for
- Marine engine engineer who wishes to specialise in SCR and NOx reduction systems.
- Chief engineer who wishes to specialise in SCR and NOx reduction systems.
- Gas aftertreatment engineer who wishes to specialise in SCR and NOx reduction systems.
- Technical superintendent who wishes to specialise in SCR and NOx reduction systems.
- Emissions inspector who wishes to specialise in SCR and NOx reduction systems.
- Catalyst service technician who wishes to specialise in SCR and NOx reduction systems.
- Graduates in engineering or sciences seeking to join engine manufacturers.
What you'll work with
- MARPOL Annex VI, Regulation 13 (nitrogen oxides)
- NOx Technical Code 2008 (IMO)
- Resolution MEPC.291(71) 2017 Guidelines for marine diesel engines fitted with SCR systems
- ISO 8178 Reciprocating internal combustion engines. Exhaust emission measurement
- ISO 18611 Ships and marine technology. NOx reducing agent AUS 40
- Regulation (EU) 2016/1628 on emissions from non-road mobile machinery
- DNV class guidelines for NOx reduction systems
6 modules · 300 h
1.1Thermal, prompt and fuel NOx mechanisms1.2Influence of temperature and residence time1.3Differences between two-stroke and four-stroke engines1.4Expression of specific emissions in g/kWh1.5Test cycles E2, E3 and D21.6Engine families and groups1.7Engine technical file1.8Effects of NOx on health and ecosystems1.9Classification of reduction technologies1.10Workshop: estimating NOx emissions per voyage
2.1Injection timing retard and combustion optimisation2.2Exhaust gas recirculation (EGR)2.3Water injection and fuel emulsion2.4Charge air humidification2.5Miller cycle and two-stage turbocharging2.6Gas engines in Otto cycle2.7Penalty in specific fuel consumption2.8Cost comparison of each measure2.9Real capability to achieve Tier III2.10Case study: EGR versus SCR on a bulk carrier
3.1Catalytic reduction reactions with ammonia3.2Urea as reducing agent and hydrolysis3.3Vanadium-titanium catalysts and zeolites3.4Temperature window and ammonium bisulphate3.5Space velocity and catalyst volume3.6High-pressure versus low-pressure SCR3.7Mixer, injector and reactor body3.8Ammonia slip and oxidation catalyst3.9Influence of fuel sulphur3.10Laboratory: sizing an SCR reactor
4.1Engine room layout and heat shielding4.2Urea tanks and dosing system4.3Pressure drop and exhaust back-pressure4.4Open-loop and closed-loop control4.5Interaction with waste heat boilers4.6Start-up, low loads and warm-up4.7Installation on existing ships4.8Approval under Scheme A or Scheme B4.9EIAPP certification of the engine-SCR system4.10Practice: SCR integration drawing
5.1On-board verification procedures5.2Record book of components and adjustments5.3NOx analysers and NH3 sensors5.4Catalyst deactivation and regeneration5.5Soot blowing and module cleaning5.6Urea consumption and supply logistics5.7Log of Tier II/III mode changes5.8Typical faults and diagnosis5.9IAPP and Port State inspections5.10Case study: diagnosing an ammonia leak
6.1Engine definition and operating profile6.2Tier III requirements and ECA zones6.3Selection of reduction technology6.4Catalyst sizing and dosing6.5General layout and integration6.6Verification and certification plan6.7Operating cost analysis6.8Resulting emissions balance6.9Report and presentation6.10Final review with the tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the enrolment period, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Ansys Fluent, GT-SUITE, AVL BOOST, MATLAB/Simulink, in free, academic or evaluation versions. Tests are studied using real NOx measurement procedures on engine test benches, on-board verification of an SCR system, and a technical-economic comparison of Tier III measures. Assessment is continuous, module by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the NOx formation mechanisms in marine diesel and gas engines.
Compare primary and secondary NOx reduction measures.
Size an SCR reactor and its urea dosing system.
Integrate an SCR system into newbuild and existing ships.
Apply the NOx Technical Code and the Tier III certification schemes.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The course works with Ansys Fluent, GT-SUITE, AVL BOOST, MATLAB/Simulink. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An own diploma from SEIUM upon passing the continuous assessment and the integrating project. It is in-house training, not an official Ministry qualification.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Check the recognition policy when you enrol.
Related programmes
Course in Noise and Vibration Reduction in Engine Rooms
Online 300-hour course in noise and vibration reduction in engine rooms. 6 modules covering IMO Resolution MSC.337(91) Code on Noise Levels on Board Ships, ISO 2923…
Course in Parametric Hull Design Methodologies
Online 300 h course in parametric hull design methodologies. 6 modules covering IMO Resolution MEPC.364(79) Calculation of the attained EEDI, ISO 10303 STEP Representation and exchange…
Course in Sports Marina Management
Online course of 300 h in sports marina management. 6 modules covering Coastal Law 22/1988, Royal Decree 393/2007 (Basic Self-Protection Standard) and Dockwa. Assigned tutor and…
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships