Apply now
CourseElectromobility, Batteries & Hydrogen Enrolment open

Grid-forming in Energy Storage Systems Course

Online 300-hour course in grid-forming for energy storage systems. 6 modules covering Regulation (EU) 2016/631 (generator connection requirements), IEEE 2800-2022 (inverter-based resources in transmission) and MATLAB/Simulink. Tutor assigned and enrolment open.

Duration300 h
ModeOnline
Start datesOctober / March
LocationEurope (Madrid)
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor
Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this programme. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Explain why reduced inertia requires grid-forming converters.

02

Compare droop, VSM and synchronising power control strategies.

03

Analyse the stability of grid-forming converters in weak grids.

04

Size converter overcapacity and energy reserve for stability services.

05

Interpret the grid-forming requirements of different operators.

06

Model and validate controllers using EMT and HIL simulation.

07

Specify a grid-forming BESS for a real network case.

Profile

Who it's for

  • Converter control engineer who wants to specialise in Grid-forming in energy storage systems.
  • Electrical system stability specialist who wants to specialise in Grid-forming in energy storage systems.
  • Energy storage engineer who wants to specialise in Grid-forming in energy storage systems.
  • Grid connection studies engineer who wants to specialise in Grid-forming in energy storage systems.
  • Grid-forming researcher who wants to specialise in Grid-forming in energy storage systems.
  • System operator engineer who wants to specialise in Grid-forming in energy storage systems.
  • Graduates in engineering or science seeking to join system operators.
Standards & tools

What you'll work with

  • Regulation (EU) 2016/631 (generator connection requirements)
  • IEEE 2800-2022 (inverter-based resources in transmission)
  • Great Britain Grid Code (modification GC0137, grid-forming)
  • AEMO Voluntary Specification for Grid-forming Inverters
  • IEEE 1547-2018 (interconnection of distributed resources)
  • IEC 62933-2-1 (energy storage parameters and testing)
  • EN 50549-2 (generators connected to medium voltage)
Syllabus

6 modules · 300 h

  1. 1.1Loss of system inertia
  2. 1.2Limitations of grid-following control
  3. 1.3The converter as a voltage source
  4. 1.4Inertia and grid strength
  5. 1.5Experiences in Australia and the United Kingdom
  6. 1.6Stability services
  7. 1.7The BESS as a grid-forming platform
  8. 1.8Challenges for system operators
  9. 1.9European roadmap
  10. 1.10Case study: the 2016 South Australia blackout
  1. 2.1Frequency and voltage droop control
  2. 2.2Virtual synchronous machine
  3. 2.3Synchronising power control
  4. 2.4Virtual oscillator control
  5. 2.5PLL-free synchronisation
  6. 2.6Inner voltage and current loops
  7. 2.7Virtual output impedance
  8. 2.8Current limitation
  9. 2.9Mode transition
  10. 2.10Laboratory: virtual synchronous machine in Simulink
  1. 3.1Inertial response to imbalances
  2. 3.2Response to phase jumps
  3. 3.3Short-circuit contribution
  4. 3.4Damping of oscillations
  5. 3.5Interaction with other converters
  6. 3.6Operation in weak grids
  7. 3.7Transient synchronisation stability
  8. 3.8Small-signal analysis
  9. 3.9Islanding and black start
  10. 3.10Practice: phase jump in a weak grid
  1. 4.1NESO requirements in Great Britain
  2. 4.2AEMO voluntary specification
  3. 4.3ENTSO-E proposals
  4. 4.4Technical procurement specification
  5. 4.5Converter overcapacity
  6. 4.6State-of-charge reserve
  7. 4.7Economic valuation of the service
  8. 4.8Stability markets
  9. 4.9Behaviour certification
  10. 4.10Workshop: specifying a grid-forming BESS
  1. 5.1RMS and EMT models
  2. 5.2Generic converter models
  3. 5.3HIL controller testing
  4. 5.4Field tests
  5. 5.5Model validation
  6. 5.6Controller comparison
  7. 5.7Performance monitoring
  8. 5.8Lessons from real projects
  9. 5.9Interoperability with other equipment
  10. 5.10Case study: Hornsdale Power Reserve
  1. 6.1Network characterisation
  2. 6.2Service requirements
  3. 6.3Control strategy selection
  4. 6.4Converter sizing
  5. 6.5Simulation model
  6. 6.6Behaviour tests
  7. 6.7Economic evaluation of the service
  8. 6.8Conclusions and risks
  9. 6.9Report and presentation
  10. 6.10Final review with the tutor
Methodology, software & labs

How you'll learn

100 % online training on the SEIUM campus, with downloadable material, recorded classes and assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine with work.

Each module combines theory, guided reading of the original standard and applied exercises. Working software includes MATLAB/Simulink, PSCAD, DIgSILENT PowerFactory, RTDS, PLECS, in free, academic or evaluation versions. Testing is studied through real EMT simulation procedures for phase jumps and voltage dips, HIL tests of grid-forming controllers, and technical specification for tenders. Assessment is continuous per module plus the final integrating project.

Accreditable laboratories(EN ISO/IEC 17025) with a rotor rig, EMC/Lightning pre-compliance, HIL/SIL, vibration/acoustics.
Evidence-oriented Master's Thesis:safety case, test plan, compliance dossier and operating limits.
Mentored by industry:faculty with track records in training, , eVTOL/UAM and flight test.
Flexible format(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:a safety-by-design approach, with OT cybersecurity, DIH and compliance as core pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Network characterisation

Explain why reduced inertia requires grid-forming converters.

Service requirements

Compare droop, VSM and synchronising power control strategies.

Control strategy selection

Analyse the stability of grid-forming converters in weak grids.

Converter sizing

Size converter overcapacity and energy reserve for stability services.

Simulation model

Interpret the grid-forming requirements of different operators.

Career opportunities

Where this takes you

Converter control engineerElectrical system stability specialistEnergy storage engineerGrid connection studies engineerGrid-forming researcherSystem operator engineer
Admissions & scholarships

Requirements

  • No prior degree is required.
  • Internet connection and a computer capable of running the programme's software.
  • Sufficient Spanish-language proficiency to follow technical standards documents.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme comprises 300 total hours spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.

You work with MATLAB/Simulink, PSCAD, DIgSILENT PowerFactory, RTDS, PLECS. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.

SEIUM Institute's own diploma upon passing continuous assessment and the final integrating project. It is in-house training, not an official Ministry qualification.

Yes. Modules passed in a course or Postgraduate Diploma in the same area are recognised towards the higher-level programme. Check the recognition policy when you enrol.

Keep exploring

Related programmes

See all in Electromobility, Batteries & Hydrogen
Course449 $

Business plan course for satellites

The Business Plans for Satellites course provides an immersive experience in creating and analyzing business models for the space industry, exploring topics such as the satellite…

3 monthsHybridElectromobility, Batteries & Hydrogen
Course275 $

Course in Electrical Regulation for Vintage Alternators

Online 300 h course in electrical regulation for vintage alternators. 6 modules covering ISO 8854 (alternators with regulator: tests), ISO 16750-2 (electrical loads in road vehicles)…

300 hHybridElectromobility, Batteries & Hydrogen
Course499 $

Charging infrastructure interoperability course

Charging Infrastructure Interoperability Course Explore the essential standards and technologies for the interconnection and compatibility of electric vehicle (EV) charging systems. It focuses on the implementation…

3 monthsHybridElectromobility, Batteries & Hydrogen
Grid-forming in Energy Storage Systems CourseEnrol
Related programmes

More in Energy and Networks

ATM and Air Traffic Control Fundamentals CourseView programme →Level 3/4 Autonomous Driving Testing CourseView programme →Personal and Environmental Dosimetry CourseView programme →Multi-terminal and Offshore Links CourseView programme →Course in Road Traffic Accident InvestigationView programme →Course in Blackout Resilience StrategiesView programme →

All Energy and Networks programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.