Multi-disc and anti-slip clutch course
About our
Multi-Disc and Anti-Slip Clutch Course
This course focuses on the theory and practice of advanced clutch systems, including the design and operation of multi-disc clutches and anti-slip technology. It explores performance optimization, wear reduction, and safety improvements in vehicles and machinery. Friction principles, materials, and assembly techniques are covered, as well as maintenance and repair, using tools and methodologies to diagnose and troubleshoot these essential components.
The course provides practical knowledge on the application of advanced clutch technologies, including electronic control systems and data analysis. Participants will learn to identify and troubleshoot common problems, conduct performance tests, and understand the latest innovations in the field of clutches. Technicians and professionals are trained in the maintenance and repair of multi-disc and anti-jump clutches, optimizing performance and durability.
Multi-disc and anti-slip clutch course
- Format: Hybrid
- Duration: 3 months
- Hours: 300 H
- Language: English / Spanish
- Registration date: 23-10-2026
- Start date: 12-12-2026
- Available places: 2
320 $
Competencies and results
What you will learn
1. Mastery of Multi-Disc and Anti-Jump Clutches: Rotor Modeling and Performance
- Fundamentals of Multi-Disc and Anti-Slip Clutches:
- Understand the operating theory and key components.
- Identify the different types of multi-disc and anti-slip clutches.
- Analyze the forces and moments acting on clutches.
- Rotor Modeling:
- Develop mathematical models and simulations to predict rotor behavior.
- Use specialized software for finite element analysis (FEA).
- Evaluate the influence of design parameters on rotor performance.
- Rotor Performance:
- Evaluate the efficiency and torque transmission capacity of clutches.
- Optimize the design to improve Performance and reduce losses.
Analyze the rotor’s response under different load and speed conditions.
- Failure and Degradation Analysis:
- Identify common failure modes in multi-disc and anti-slip clutches.
- Evaluate the service life and reliability of the components.
Analyze flap-lag-torsion, whirl flutter, and fatigue couplings.
- Materials and Manufacturing:
- Select appropriate materials for clutches, considering mechanical properties and wear resistance.
- Dimension laminates in composites, joints, and bonded joints with FE.
Study the manufacturing and assembly processes of clutches.
Quality Control and Maintenance:
Implement damage tolerance and non-destructive testing (NDT) (UT/RT/thermography).
Establish inspection and preventive maintenance programs.
Apply diagnostic and troubleshooting techniques to clutches.
2. Rotor Optimization in Multi-Disc and Anti-Slip Clutch Systems
2. Rotor Optimization in Multi-Disc and Anti-Slip Clutch Systems
- Identify and evaluate failure mechanisms in multi-disc clutch systems.
- Understand the operation of anti-slip systems and their integration with the rotor.
- Analyze the effects of engagement and disengagement forces on the rotor.
- Study the influence of disc geometry on system performance and durability.
- Evaluate the dynamic behavior of the rotor, including vibrations and resonances.
- Optimize the rotor design to minimize wear and maximize service life.
- Apply finite element analysis (FEA) techniques for structural and thermal analysis.
- Select appropriate materials for manufacturing rotors and clutch discs.
- Understand non-destructive testing (NDT) and its application in the inspection of rotors.
- Develop predictive and preventive maintenance strategies for multi-disc clutch systems.
3. Comprehensive user-oriented design and validation (from modeling to manufacturing)
You will learn to integrate the entire product development process, from initial model conception to final validation, applying user-centered methodologies. You will develop skills in parametric design, ergonomics, simulation, sustainable materials, 3D visualization, and manufacturing management, ensuring efficient, safe solutions that meet current industry standards.
4. Rotor Evaluation in Multi-Disc Clutches with Anti-Jump Technology
4. Rotor Evaluation in Multi-Disc Clutches with Anti-Slip Technology
Understand rotor failure mechanisms, including flap-lag-torsion couplings, whirl flutter, and the effects of fatigue on design and operation.
Master the dimensioning and structural analysis of components using finite element (FE) methods, focusing on laminates made with composites, bonded joints, and structural integrity.
Apply engineering strategies for damage tolerance, including the implementation of non-destructive testing (NDT) such as ultrasonic testing (UT), radiography (RT), and thermography, to evaluate integrity and extend component life.
5. Specialization in Multi-Disc and Anti-Jump Clutches: Rotor Design and Evaluation
5. Specialization in Multi-Disc and Anti-Slip Clutches: Rotor Design and Evaluation
Understand the fundamentals of multi-disc and anti-slip clutch design.
Study the operating principles of control and actuation systems.
Analyze the materials used in clutch manufacturing, including their properties and behavior.
Explore structural and dynamic rotor analysis techniques.
Evaluate clutch performance through simulations and experimental testing.
Identify and solve common problems in clutch design and operation.
Apply relevant standards and norms for clutch design and manufacturing.
Gain in-depth knowledge of rotor design and evaluation, including balance and vibration aspects.
Learn about the different types of multi-disc and anti-slip clutches, their advantages and disadvantages.
6. Rotor Modeling and Performance in Multi-Disc and Anti-Jump Clutch Systems
6. Rotor Modeling and Performance in Multi-Disc and Anti-Lap Clutch Systems
- Identify and evaluate the structural dynamics of the rotor, including the analysis of flap-lag-torsion couplings, to understand its behavior under different loads and operating conditions.
- Study the whirl flutter phenomenon, analyzing its causes and effects on rotor stability, and develop strategies to mitigate its risks.
- Analyze material fatigue, evaluating its service life and the potential failures that may occur due to cyclic loading, considering the factors that influence this process.
- Dimension the structural components of the rotor, including laminates in composites, and design joints and bonded joints using finite element (FE) analysis to optimize strength and performance.
- Apply damage tolerance principles to assess the rotor’s ability to withstand damage and develop inspection and maintenance strategies to ensure its structural integrity.
- Implement non-destructive testing (NDT) techniques, such as ultrasonic testing (UT), radiography (RT), and thermography, to detect and evaluate defects in rotor materials and components.
Who this program is for:
Multi-disc and anti-slip clutch course
- Engineers with degrees in areas such as Aerospace Engineering, Mechanical Engineering, Industrial Engineering, Automation, or related fields.
- Professionals working in the OEM rotorcraft/eVTOL industry, MRO (Maintenance, Repair, and Operations) companies, aeronautical consulting, or technology centers.
- Specialists in Flight Testing, aeronautical certification, avionics, flight control, and aircraft dynamics, seeking to deepen their knowledge.
- Regulatory/authority personnel Aeronautical professionals and those involved in UAM/eVTOL (Urban Air Mobility/Electric Vertical Take-Off and Landing Vehicle) projects who require knowledge of regulatory compliance.
- Standards-driven curriculum: you will work with CS-27/CS-29, DO-160, DO-178C/DO-254, ARP4754A/ARP4761, ADS-33E-PRF from the first module.
- Accreditable laboratories (EN ISO/IEC 17025) with rotor bench, EMC/Lightning pre-compliance, HIL/SIL, vibrations/acoustics.
- Evidence-oriented TFM: safety case, test plan, compliance dossierand operational limits.
- Mentored by industry: teachers with experience in rotorcraft, tiltrotor, eVTOL/UAM and flight test.
- Flexible modality (hybrid/online), international cohorts and support from SEIUM Career Services.
- Ethics and security: safety-by-design approach, cyber-OT, DIH and compliance as pillars.
Module 1 — Multi-Disc and Anti-Slip Clutch Mastery: Rotor Modeling and Performance
1.1 Introduction to multi-disc and anti-slip clutches: key components.
1.2 Operating principles of multi-disc clutches.
1.3 Fundamentals of the anti-slip system and its integration.
1.4 Rotor materials and properties: selection and characteristics.
1.5 Rotor modeling: basic concepts and techniques.
1.6 Rotor performance analysis: parameters and initial evaluation.
1.7 Design of multi-disc clutch systems: key considerations.
1.8 Common applications of multi-disc and anti-slip clutches.
1.9 Introduction to simulation and analysis software.
1.10 Introduction to rotor testing and validation.
2.2 Introduction to Rotor Optimization in Multi-Disc and Anti-Slip Clutches
3.2 Rotor Design Principles for Optimization
4.3 Rotor Materials and Selection: Impact on Performance
5.4 Finite Element Analysis (FEA) Applied to the Rotor
6.5 Modeling and Simulation of Rotor Optimization
7.6 Optimization Methods to Reduce Rotor Wear
8.7 Rotor Optimization to Improve Torque Transfer
9.8 Rotor Design to Maximize Heat Dissipation
20.9 Testing and Validation of Optimized Rotor Designs
22.20 Case Studies: Implementing Rotor Optimization in Practice
3.3 Introduction to Rotor Analysis in Multi-Disc Clutches
3.2 Types of Rotors and Their Components in Clutches
3.3 Operating Principles of Anti-Lapse Control
3.4 Rotor Modeling and Simulation
3.5 Analysis of Stresses and Deformations in the Rotor
3.6 Optimization of Rotor Design for Anti-Lapse Control
3.7 Evaluation of Rotor Performance Under Different Conditions
3.8 Troubleshooting and Diagnosis in Clutch Systems
3.9 Standards and Regulations Related to Rotor Analysis
3.30 Case Studies: Rotor Analysis in Specific Applications
4.4 Introduction to Multi-Disc and Anti-Slip Clutches: Rotor Fundamentals
4.2 Types of Rotors in Multi-Disc Clutches: Design and Materials
4.3 Rotor Operating Principles in Anti-Slip Systems
4.4 Load and Stress Analysis on the Rotor
4.5 Rotor Durability Evaluation: Key Factors
4.6 Impact of Temperature on Rotor Performance
4.7 Rotor Testing and Trials: Evaluation Methods
4.8 Common Rotor Failures: Diagnosis and Solutions
4.9 Optimizing Rotor Design to Improve Performance
4.40 Case Studies: Rotor Analysis in Real-World Applications
5. Introduction to Multi-Disc and Anti-Jump Clutch Systems
5. Operating Principles of the Rotor and its Components
3. Types of Rotors and Materials Used
4. Factors Influencing Rotor Performance
5. Rotor Optimization Techniques to Improve Efficiency
3. Rotor Design to Minimize Wear and Maximize Service Life
4. Simulation and Analysis of Optimization Models
5. Design Considerations for Vibration Reduction
3. Failure Analysis and Troubleshooting of Rotor Problems
4. Anti-Jump Control Techniques and Their Impact on the Rotor
5. Data Interpretation and Results Analysis
6. Implementation of Control and Monitoring Strategies
4. Rotor Performance Testing Under Real-World Conditions
5. Evaluation of Rotor Durability and Strength
6. Data Analysis for Decision-Making 7. Safety and regulatory compliance considerations.
5. Rotor design process for specific systems.
6. Selection of materials and components for the rotor.
7. Evaluation of design performance and efficiency.
8. Prototype testing and validation of the final design.
6. Mathematical modeling of the rotor and its components.
7. Simulation of rotor behavior under different conditions.
8. Analysis of results and optimization of the model.
9. Validation of the model through testing and experiments.
7. Mastery of rotor modeling and simulation techniques.
8. Advanced analysis of rotor performance in various scenarios.
9. Optimization of rotor design and efficiency.
50. Solving complex rotor-related problems.
8. Advanced rotor modeling and its effects on performance.
9. Interpretation of modeling and simulation results.
50. Application of optimization techniques to improve rotor performance. 55. Design and simulation of multi-disc and anti-jump clutch systems.
6.6 Principles of Multi-Disc Clutches
6.2 Key Components and Their Function
6.3 Types of Multi-Disc Clutches and Applications
6.4 Advantages and Disadvantages of Multi-Disc Clutches
6.5 Basic Design and Material Selection
6.6 Operation and Preventive Maintenance
6.7 Common Failures and Solutions
6.8 Introduction to Anti-Jump Control
2.6 Mathematical Modeling of the Rotor
2.2 Finite Element Analysis (FEA)
2.3 Modeling and Analysis Software
2.4 Key Rotor Parameters and Their Impact
2.5 Stress and Strain Analysis
2.6 Rotor Design Optimization
2.7 Model Validation
2.8 Introduction to Rotor Performance
3.6 Rotor Dynamics in Operation
3.2 Torque Transfer and Efficiency
3.3 Influence of Temperature and Pressure
3.4 Vibration Analysis and Noise
3.5 Lubrication and Cooling
3.6 Rotor Performance Curves
3.7 Performance Measurement Methods
3.8 Performance-Related Failures
4.6 Rotor Evaluation Techniques
4.2 Anti-Jump Control Systems: Principles
4.3 Sensors and Actuators in Anti-Jump Systems
4.4 Implementation of Control Algorithms
4.5 Functional Testing and Calibration
4.6 Evaluation Data Analysis
4.7 Integration with the Clutch System
4.8 Failures in Anti-Jump Systems and Diagnostics
5.6 Rotor Design for Anti-Jump Systems
5.2 Material Selection for Anti-Jump Systems
5.3 Stress and Fatigue Analysis under Anti-Jump Conditions
5.4 Cooling and Lubrication Systems in Anti-Jump Environments
5.5 Integration with the Traction Control System
5.6 Performance Evaluation under Anti-Jump Conditions Anti-Jump
5.7 Design Optimization for Anti-Jump Performance
5.8 Success and Failure Case Studies
6.6 Complete Clutch System Modeling
6.2 Clutch Dynamics Simulation
6.3 Performance Analysis Under Different Conditions
6.4 System Design Optimization
6.5 Integration of Anti-Jump Control into the Model
6.6 System Evaluation Under Real-World Conditions
6.7 Test Design for Model Validation
6.8 Sensitivity Analysis of Rotor Parameters
6.9 Prototype Development and Testing
6.60 Case Study: Clutch Optimization
7.6 Multi-Disc Clutch Design
7.2 Rotor Material Selection
7.3 Stress and Stress Calculation
7.4 Influence of Temperature and Cooling
7.5 Lubrication and Cooling Techniques
7.6 Rotor Testing and Validation
7.7 Maintenance and Clutch Repair
7.8 Fault Design and Solutions
7.9 Case Studies and Applications
7.60 Anti-Jump Control Mastery
8.6 3D Rotor Modeling
8.2 Rotor Finite Element Analysis (FEA)
8.3 Rotor Design Optimization
8.4 Rotor Performance Curves
8.5 Failure Analysis and Failure Modes
8.6 Measurement and Evaluation Techniques
8.7 Design for Manufacturing and Assembly
8.8 Rotor Testing and Validation
8.9 Data Analysis and Results
8.60 Advanced Rotor Applications
- Hands-on methodology: test-before-you-trust, design reviews, failure analysis, compliance evidence.
- Software (depending on licenses/partners): MATLAB/Simulink, Python (NumPy/SciPy), OpenVSP, SU2/OpenFOAM, Nastran/Abaqus, AMESim/Modelica, acoustics tools, planning toolchains DO-178C.
- SEIUM Laboratories: scale rotor bench, vibrations/acoustics, EMC/Lightning pre-compliance, HIL/SIL for AFCS, data acquisition with strain gauging.
- Standards and compliance: EN 9100, 17025, ISO 27001, GDPR.
Capstone-type projects
Admissions, fees, and scholarships
- Profile: Background in Computer Engineering, Mathematics, Statistics, or related fields; practical experience in NLP and valued information retrieval systems.
- Documentation: Updated CV, academic transcript, SOP/statement of purpose, project examples or code (optional).
- Process: Application → Technical evaluation of profile and experience → Technical interview → Review of case studies → Final decision → Enrollment.
- Fees:
- Single payment: 10% discount.
- Payment in 3 installments: No fees; 30% upon registration + 2 equal monthly payments of the remaining 35%.
Monthly payment: available with a 7% commission on the total; annual review.
Scholarships: based on academic merit, financial need, and promoting inclusion; agreements with companies in the sector for partial or full scholarships.
See “Calendar & Calls for Applications,” “Scholarships & Grants,” and “Fees & Financing” in the SEIUM mega-menu.
Do you have any questions?
Our team is ready to help you. Contact us, and we will respond as soon as possible.
F. A. Q
Frequently asked questions
Yes, we have international certification
Yes: experimental models, real data, applied simulations, professional environments, real case studies.
It is not mandatory. We offer leveling tracks and tutoring.
Completely. It covers e-propulsion, integration, and emerging regulations (SC-VTOL).
Recommended. There are also internal challenges and consortiums.
Yes. Online/hybrid modality with planned labs and visa support (see “Visa & Residence”).